Additives

Property	Average Result
Cure System	Platinum
Extrusion Rate	117 g/minute
Lap Shear	350 psi (2.41 MPa)
Durometer	35 Type A
Appearance	Black
Cure	48 hours / RTV
Elongation	265 %
Mix Ratio	1:1
Operating Temperature	-65 °C / 240 °C
Specific Gravity	1.28
Tensile	600 psi (4.14 MPa)
Work Time	1 hours
Comment	Fuel Resistance

CF5-3521-2

Platinum

Thixotropic / non-slump

3.5 hours

30 Type A

50% M fluoro. Black and will RTV in 48 hrs

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	240,000 cP (240,000 mPa*s)
Durometer	30 Type A
Appearance	Black
Cure	48 hours / RTV
Elongation	275 %
Mix Ratio	1:1
Specific Gravity	1.3
Tear	35 ppi (6.17 kN/m)
Tensile	550 psi (3.79 MPa)
Work Time	3.5 hours
Comment	50% M fluoro. Black and will RTV in 48 hrs

CV-1142

Oxime

Thixotropic / non-slump

N/A

45 Type A

For applications requiring a broader operating temperature range. Available in black and white. 200 psi (1.4 MPa), Unprimed lap shear.

Product Details

Property	Average Result
Cure System	Oxime
Extrusion Rate	35 g/minute
Lap Shear	375 psi (2.59 MPa)
Durometer	45 Type A
Appearance	Translucent
Cure	7 days / RTV
Dielectric Strength	1,100 volts/mil (42.9 kV/mm)
Elongation	300 %
Mix Ratio	1 PART
Refractive Index	1.43
Specific Gravity	1.11
Tack Free Time	20 minutes
Tensile	700 psi (4.83 MPa)
Comment	For applications requiring a broader operating temperature range. Available in black and white. 200 psi (1.4 MPa), Unprimed lap shear.

CV-1143

Oxime

Thixotropic / non-slump

N/A

45 Type A

Non-Slump

Product Details

Property	Average Result
Cure System	Oxime
Extrusion Rate	25 g/minute
Lap Shear	350 psi (2.41 MPa)
Durometer	45 Type A
Appearance	Translucent
Cure	7 days / RTV
Elongation	400 %
Mix Ratio	1 PART
Specific Gravity	1.1
Tack Free Time	15 minutes
Tensile	800 psi (5.52 MPa)
Comment	Non-Slump

CV-2187

Platinum

Flowable / Self Leveling

3 hours

35 Type A

Tough, self leveling and good adhesion to various metals.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	90,000 cP (90,000 mPa*s)
Durometer	35 Type A
Appearance	Translucent
Cure	15 minutes / 150 °C
Elongation	400 %
Mix Ratio	10:1
Specific Gravity	1.1
Tack Free Time	15 hours
Tear	75 ppi (13.23 kN/m)
Tensile	925 psi (6.38 MPa)
Work Time	3 hours
Comment	Tough, self leveling and good adhesion to various metals.

CV-2287

Platinum

Flowable / Self Leveling

3.5 hours

30 Type A

Low / High Temperature, Flowable, Fast Cure

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	85,000 cP (85,000 mPa*s)
Lap Shear	450 psi (3.1 MPa)
Durometer	30 Type A
Appearance	Translucent
Cure	30 minutes / 150 °C
Dielectric Strength	900 volts/mil (35.1 kV/mm)
Elongation	400 %
Mix Ratio	10:1
Specific Gravity	1.11
Tear	60 ppi (10.58 kN/m)
Tensile	750 psi (5.17 MPa)
Work Time	3.5 hours
Comment	Low / High Temperature, Flowable, Fast Cure

CV-2289

Platinum

Flowable / Self Leveling

30 minutes

30 Type A

Tough, self leveling and good adhesion to various metals. Recommended for broad temperature applications. 400 psi (2.8 MPa), primed (CF1-135) lap shear.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	50,000 cP (50,000 mPa*s)
Lap Shear	400 psi (2.76 MPa)
Durometer	30 Type A
Appearance	Translucent
Cure	15 minutes / 150 °C
Elongation	350 %
Mix Ratio	1:1
Tensile	750 psi (5.17 MPa)
Work Time	30 minutes
Comment	Tough, self leveling and good adhesion to various metals. Recommended for broad temperature applications. 400 psi (2.8 MPa), primed (CF1-135) lap shear.

CV-2289-1

Platinum

Flowable / Self Leveling

30 minutes

34 Type A

Pourable Elastomer

Product Details

Property	Average Result
Cure System	Platinum
Rheology	Flowable / Self Leveling
Work Time	30 minutes
Durometer	34 Type A
Appearance	White
Cure	15 minutes / 150 °C
Cure Type	Heat Cure / RTV
Dielectric Strength	955 volts/mil (37.25 kV/mm)
Elongation	343 %
Lap Shear	375 psi (2.6 MPa)
Mix Ratio	1:1
Rheology	Flowable / Self Leveling
Specific Gravity	1.12
Tack Free Time	5 hours
Tensile	720 psi (5.0 MPa)
Viscosity	50,000 cP (50,000 mPa*s)

CV-2289-2

Platinum

Flowable / Self Leveling

30 minutes

30 Type A

Pourable Elastomer

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	52,500 cP (52,500 mPa*s)
Lap Shear	425 psi (2.93 MPa)
Durometer	30 Type A
Appearance	Black
Cure	15 minutes / 150 °C
Elongation	400 %
Mix Ratio	1:1
Tack Free Time	5 hours
Tear	50 ppi (8.82 kN/m)
Tensile	750 psi (5.17 MPa)
Work Time	30 minutes
Comment	Pourable Elastomer

CV-2500

Platinum

Flowable / Self Leveling

2 hours

50 Type A

Pourable, Optically Clear

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	8,000 cP (8,000 mPa*s)
Lap Shear	400 psi (2.76 MPa)
Durometer	50 Type A
Appearance	Clear
Cure	15 minutes / 150 °C
Elongation	125 %
Mix Ratio	10:1
Specific Gravity	1.02
Tack Free Time	10 hours
Tensile	1,000 psi (6.9 MPa)
Work Time	2 hours
Comment	Pourable, Optically Clear

CV-2500-2

Platinum

Flowable / Self Leveling

3 hours

50 Type A

Low Viscosity, Fast Cure

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	8,400 cP (8,400 mPa*s)
Durometer	50 Type A
Appearance	Black
Cure	30 minutes / 150 °C
Dielectric Strength	850 volts/mil (33.15 kV/mm)
Elongation	150 %
Mix Ratio	10:1
Specific Gravity	1.05
Tack Free Time	6 hours
Tensile	950 psi (6.55 MPa)
Work Time	3 hours
Comment	Low Viscosity, Fast Cure

CV-2510

Alkoxy

Flowable / Self Leveling

4 hours

45 Type A

Low / High Temperature, Flowable

Product Details

Property	Average Result
Cure System	Alkoxy
Viscosity	45,000 cP (45,000 mPa*s)
Durometer	45 Type A
Appearance	White
Cure	7 days / RTV
Elongation	200 %
Mix Ratio	100:0.5
Specific Gravity	1.19
Tack Free Time	9 hours
Tensile	600 psi (4.14 MPa)
Work Time	4 hours
Comment	Low / High Temperature, Flowable

CV-2566

Alkoxy

Flowable / Self Leveling

3 hours

55 Type A

Pourable RTV Cure, * 1 )Primed Lap Shear 500 psi (3.4 MPa)

Product Details

Property	Average Result
Cure System	Alkoxy
Viscosity	55,000 cP (55,000 mPa*s)
Lap Shear	500 psi (3.45 MPa)
Durometer	55 Type A
Appearance	Rust Red
Cure	7 days / RTV
Dielectric Strength	825 volts/mil (32.18 kV/mm)
Elongation	150 %
Mix Ratio	100:0.5
Specific Gravity	1.49
Tack Free Time	8 hours
Tear	40 ppi (7.05 kN/m)
Tensile	950 psi (6.55 MPa)
Thermal Conductivity	0.27 W/(mK)
Work Time	3 hours
Comment	Pourable RTV Cure, * 1 )Primed Lap Shear 500 psi (3.4 MPa)

CV-2567

Alkoxy

Flowable / Self Leveling

6.5 hours

21 Type A

Diluent for Tin Condensation CV Silicones

Product Details

Property	Average Result
Cure System	Alkoxy
Viscosity	5,000 cP (5,000 mPa*s)
Lap Shear	45 psi (0.31 MPa)
Durometer	21 Type A
Appearance	Clear
Cure	7 days / RTV
Elongation	150 %
Mix Ratio	100:0.5
Refractive Index	1.40
Specific Gravity	1.01
Tack Free Time	7.5 hours
Tensile	80 psi (0.55 MPa)
Work Time	6.5 hours
Comment	Diluent for Tin Condensation CV Silicones

CV-2568

Alkoxy

Flowable / Self Leveling

4 hours

50 Type A

Long Worktime, Low Density* 1, )Primed Lap Shear 100 psi (0.69 MPa)

Product Details

Property	Average Result
Cure System	Alkoxy
Viscosity	125,000 cP (125,000 mPa*s)
Lap Shear	100 psi (0.69 MPa)
Durometer	50 Type A
Appearance	Red
Cure	7 days / RTV
Dielectric Strength	645 volts/mil (25.16 kV/mm)
Elongation	60 %
Mix Ratio	100:0.5
Specific Gravity	0.64
Tack Free Time	13 hours
Tensile	175 psi (1.21 MPa)
Work Time	4 hours
Comment	Long Worktime, Low Density* 1, )Primed Lap Shear 100 psi (0.69 MPa)

CV-2680-12

Platinum

N/A

Low Outgassing version of R-2682-12.

Product Details

Property	Average Result
Cure System	Platinum
Lap Shear	250 psi (1.72 MPa)
Appearance	Translucent
Application Life	7 minutes
Cure	4 hours / 65 °C
Elongation	400 %
Tear	115 ppi (20.28 kN/m)
Tensile	1,450 psi (10 MPa)
Comment	Low Outgassing version of R-2682-12.

CV-2686-12

Platinum

N/A

Use for RFI and EMI shielding in electrical and space applications. For applications requiring shorter work times, easy clean-up, and consistent bond thickness.

Product Details

Property	Average Result
Cure System	Platinum
Appearance	Black
Cure	4 hours / 65 °C
Volume Resistivity	150 ohmcm
Comment	Use for RFI and EMI shielding in electrical and space applications. For applications requiring shorter work times, easy clean-up, and consistent bond thickness.

CV-2688-12

Platinum

Thixotropic / Non-slump

N/A

For applications requiring shorter work times, easy clean-up, and consistent bond thickness

Product Details

Property	Average Result
Appearance	Translucent
Cure	4 hours / 65 °C
Cure System	Platinum
Cure Type	RTV
Elongation	850 %
Lap Shear	250 psi (1.7 MPa)
Rheology	Thixotropic / Non-slump
Substrate	Primerless: ABS / Aluminum / Glass / Metal / PEEK / Plastic / PMMA / Polycarbonate / Polyetherimide / Polymide / Polyurethane / Silicone / Stainless steel / Titanium
Tear	115 ppi (20.3 kN/m)
Tensile	1,450 psi (10.0 MPa)

CV1-1142

Oxime

Flowable / Self Leveling

N/A

30 Type A

Low viscosity and self leveling. Recommended for board temperature applications. 65 psi (0.45 Mpa) primed (SP-120), lap shear.

Product Details

Property	Average Result
Cure System	Oxime
Viscosity	13,000 cP (13,000 mPa*s)
Extrusion Rate	70 g/minute
Lap Shear	65 psi (0.45 MPa)
Durometer	30 Type A
Appearance	Translucent
Cure	7 days / RTV
Elongation	200 %
Specific Gravity	1.05
Tensile	400 psi (2.76 MPa)
Comment	Low viscosity and self leveling. Recommended for board temperature applications. 65 psi (0.45 Mpa) primed (SP-120), lap shear.

CV1-1142-4

Oxime

Flowable / Self Leveling

N/A

35 Type A

Self-leveling, Built-in UV Tracer

Product Details

Property	Average Result
Cure System	Oxime
Extrusion Rate	60 g/minute
Durometer	35 Type A
Appearance	Translucent
Cure	7 days / RTV
Elongation	200 %
Flow Rate	3 in (76.2 mm)
Mix Ratio	1 PART
Specific Gravity	1.05
Tensile	350 psi (2.41 MPa)
Comment	Self-leveling, Built-in UV Tracer

CV1-2289-1

Platinum

Flowable / Self Leveling

4 hours

30 Type A

White, versatile adhesive with 3 hr pot life. Recommended for broad temperature applications. 450 psi (3.1 MPa), primed (CF1-135) lap shear.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	52,500 cP (52,500 mPa*s)
Lap Shear	450 psi (3.1 MPa)
Durometer	30 Type A
Appearance	White
Cure	15 minutes / 150 °C
Elongation	350 %
Mix Ratio	1:1
Specific Gravity	1.1
Tack Free Time	17 hours
Tensile	750 psi (5.17 MPa)
Work Time	4 hours
Comment	White, versatile adhesive with 3 hr pot life. Recommended for broad temperature applications. 450 psi (3.1 MPa), primed (CF1-135) lap shear.

CV1-2566

Alkoxy

Flowable / Self Leveling

3 hours

50 Type A

*1) Primed Lap Shear 650 psi (4.5 MPa)

Product Details

Property	Average Result
Cure System	Alkoxy
Viscosity	45,000 cP (45,000 mPa*s)
Lap Shear	650 psi (4.48 MPa)
Durometer	50 Type A
Appearance	Red
Cure	7 days / RTV
Elongation	160 %
Mix Ratio	100:0.5
Specific Gravity	1.45
Tensile	900 psi (6.21 MPa)
Work Time	3 hours
Comment	*1) Primed Lap Shear 650 psi (4.5 MPa)

CV10-2500

Platinum

Flowable / Self Leveling

3 hours

50 Type A

High Durometer, Optically Clear

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	7,500 cP (7,500 mPa*s)
Lap Shear	360 psi (2.48 MPa)
Durometer	50 Type A
Appearance	Clear
Cure	15 minutes / 150 °C
Elongation	130 %
Mix Ratio	1:1
Specific Gravity	1.02
Tack Free Time	5 hours
Tensile	1,000 psi (6.9 MPa)
Work Time	3 hours
Comment	High Durometer, Optically Clear

CV10-2568

Platinum

Flowable / Self Leveling

3 hours

40 Type A

Fast Cure, Low Density*,4 )Primed Lap Shear 175 psi (1.2 MPa)

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	102,500 cP (102,500 mPa*s)
Lap Shear	175 psi (1.21 MPa)
Durometer	40 Type A
Appearance	Red
Cure	30 minutes / 150 °C
Dielectric Strength	860 volts/mil (33.54 kV/mm)
Elongation	170 %
Mix Ratio	1:1
Specific Gravity	0.76
Tack Free Time	7 hours
Tensile	235 psi (1.62 MPa)
Work Time	3 hours
Comment	Fast Cure, Low Density*,4 )Primed Lap Shear 175 psi (1.2 MPa)

CV14-2500

Platinum

Flowable / Self Leveling

N/A

30 Type A

Primerless Adhesion

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	2,600 cP (2,600 mPa*s)
Lap Shear	50 psi (0.34 MPa)
Durometer	30 Type A
Appearance	Clear
Cure	1 hours / 65 °C
Elongation	150 %
Mix Ratio	1:1
Specific Gravity	1.01
Tensile	425 psi (2.93 MPa)
Comment	Primerless Adhesion

CV15-2500

Platinum

Flowable / Self Leveling

3 hours

50 Type A

*4 )Primed Lap Shear 225 psi (1.6 MPa), Optically Clear

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	3,225 cP (3,225 mPa*s)
Lap Shear	300 psi (2.07 MPa)
Durometer	50 Type A
Appearance	Clear
Cure	15 minutes / 150 °C
Elongation	70 %
Mix Ratio	1:1
Refractive Index	1.40
Specific Gravity	1.02
Tack Free Time	6 hours
Tensile	850 psi (5.86 MPa)
Work Time	3 hours
Comment	*4 )Primed Lap Shear 225 psi (1.6 MPa), Optically Clear

CV16-2500

Platinum

Flowable / Self Leveling

2 hours

40 Type A

Low / High Temperature,*4 ) Primed Lap Shear 200 psi (4.1 MPa), Optically Clear

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	5,300 cP (5,300 mPa*s)
Lap Shear	200 psi (1.38 MPa)
Durometer	40 Type A
Appearance	Clear
Cure	4 hours / 65 °C
Elongation	100 %
Mix Ratio	10:1
Refractive Index	1.43
Specific Gravity	1.04
Tensile	650 psi (4.48 MPa)
Work Time	2 hours
Comment	Low / High Temperature,*4 ) Primed Lap Shear 200 psi (4.1 MPa), Optically Clear

CV2-1142

Oxime

Thixotropic / non-slump

N/A

50 Type A

Non-slump and excellent for applications where minimal flow is desired. For applications requiring a broader operating temperature range. Available in black and white.

Product Details

Property	Average Result
Cure System	Oxime
Durometer	50 Type A
Appearance	Translucent
Cure	7 days / RTV
Comment	Non-slump and excellent for applications where minimal flow is desired. For applications requiring a broader operating temperature range. Available in black and white.

CV2-2289-1

Platinum

Flowable / Self Leveling

N/A

30 Type A

White, versatile adhesive with short pot life, tack free in 20 hrs Recommended for broad temperature applications. 300 psi (2.1 MPa) primed (CF1-135) lap shear.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	12,300 cP (12,300 mPa*s)
Lap Shear	300 psi (2.07 MPa)
Durometer	30 Type A
Appearance	White
Cure	4 hours / 65 °C
Elongation	250 %
Mix Ratio	1:1
Specific Gravity	1.1
Tack Free Time	20 hours
Tensile	450 psi (3.1 MPa)
Comment	White, versatile adhesive with short pot life, tack free in 20 hrs Recommended for broad temperature applications. 300 psi (2.1 MPa) primed (CF1-135) lap shear.

CV2-2566

Alkoxy

Thixotropic / non-slump

2 hours

55 Type A

*2) Primed Lap Shear 625 psi (4.3 MPa)

Product Details

Property	Average Result
Cure System	Alkoxy
Lap Shear	625 psi (4.31 MPa)
Durometer	55 Type A
Appearance	Red
Cure	7 days / RTV
Elongation	140 %
Mix Ratio	100:0.5
Specific Gravity	1.5
Tear	40 ppi (7.05 kN/m)
Tensile	900 psi (6.21 MPa)
Work Time	2 hours
Comment	*2) Primed Lap Shear 625 psi (4.3 MPa)

CV2-2646

Alkoxy

Flowable / Self Leveling

2 hours

75 Type A

0.003 ohmcm at 200 C

Product Details

Property	Average Result
Cure System	Alkoxy
Lap Shear	185 psi (1.28 MPa)
Durometer	75 Type A
Appearance	Gray
Cure	7 days / RTV
Elongation	70 %
Flow Rate	4 in (101.6 mm)
Mix Ratio	100:0.5
Specific Gravity	3.23
Tear	55 ppi (9.7 kN/m)
Tensile	300 psi (2.07 MPa)
Thermal Conductivity	1.5 W/(mK)
Volume Resistivity	0 ohmcm
Work Time	2 hours
Comment	0.003 ohmcm at 200 C

CV3-1142

Oxime

Thixotropic / non-slump

N/A

45 Type A

Spot Bonding, Available in Black & White

Product Details

Property	Average Result
Cure System	Oxime
Durometer	45 Type A
Appearance	Translucent
Cure	7 days / RTV
Elongation	300 %
Mix Ratio	1 PART
Specific Gravity	1.11
Tensile	675 psi (4.66 MPa)
Comment	Spot Bonding, Available in Black & White

CV3-2500

Platinum

Flowable / Self Leveling

3 hours

40 Type A

Low Viscosity, Potting & Encapsulant, Optically Clear

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	3,000 cP (3,000 mPa*s)
Durometer	40 Type A
Appearance	Clear
Cure	30 minutes / 150 °C
Elongation	100 %
Mix Ratio	10:1
Specific Gravity	1.02
Tack Free Time	6 hours
Tensile	950 psi (6.55 MPa)
Work Time	3 hours
Comment	Low Viscosity, Potting & Encapsulant, Optically Clear

CV4-2289-1

Platinum

Thixotropic / non-slump

30 minutes

30 Type A

Non-flowable

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	1,150,000 cP (1,150,000 mPa*s)
Lap Shear	325 psi (2.24 MPa)
Durometer	30 Type A
Appearance	White
Cure	30 minutes / 150 °C
Elongation	400 %
Mix Ratio	1:1
Tack Free Time	10 hours
Tear	57 ppi (10.05 kN/m)
Tensile	650 psi (4.48 MPa)
Work Time	30 minutes
Comment	Non-flowable

CV7-1142-1

Oxime

Flowable / Self Leveling

N/A

40 Type A

Recommended for extended operation at elevated temperatures.

Product Details

Property	Average Result
Cure System	Oxime
Rheology	Flowable / Self Leveling
Durometer	40 Type A
Appearance	White
Cure	7 days / RTV
Cure Type	RTV
Dielectric Strength	1,180 volts/mil (46.02 kV/mm)
Elongation	300 %
Extrusion Rate	20 g/minute
Flow Rate	0.7 in (17.78 mm)
Mix Ratio	1 PART
Specific Gravity	1.13
Tack Free Time	20 minutes
Tear	60 ppi (10.58 kN/m)
Tensile	700 psi (4.83 MPa)

CV7-2289-1

Platinum

Flowable / Self Leveling

N/A

30 Type A

Primerless Adhesion

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	228,750 cP (228,750 mPa*s)
Lap Shear	350 psi (2.41 MPa)
Durometer	30 Type A
Appearance	White
Cure	15 minutes / 150 °C
Elongation	375 %
Mix Ratio	1:1
Tack Free Time	40 hours
Tensile	700 psi (4.83 MPa)
Comment	Primerless Adhesion

EPM-2411-2

Platinum

Thixotropic / non-slump

N/A

20 Type A

Low volatility, Thixotropic, dispensable and 0.5 mm maximum slump. Shipped and stored frozen.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	300,000 cP (300,000 mPa*s)
Extrusion Rate	0.9 g/minute
Durometer	20 Type A
Appearance	Black
Cure	15 minutes / 200 °C
Elongation	700 %
Mix Ratio	1 PART
Specific Gravity	1.15
Stress at Strain	50 psi / 100 % (0.34 MPa / 100 %)
Tear	50 ppi (8.82 kN/m)
Tensile	750 psi (5.17 MPa)
Volume Resistivity	1,000,000,000,000,000 ohmcm
Comment	Low volatility, Thixotropic, dispensable and 0.5 mm maximum slump. Shipped and stored frozen.

EPM-2412

Platinum

Flowable / Self Leveling

20 minutes

30 Type A

Mobile Devices, Displace

Product Details

Property	Average Result
Cure System	Platinum
Extrusion Rate	0.08 g/minute
Durometer	30 Type A
Appearance	Translucent
Cure	24 hours / RTV
Dielectric Strength	530 volts/mil (20.67 kV/mm)
Elongation	450 %
Tensile	850 psi (5.86 MPa)
Thermal Conductivity	0.18 W/(mK)
Volume Resistivity	100,000,000,000,000 ohmcm
Work Time	20 minutes
Comment	Mobile Devices, Displace

EPM-2461

Platinum

Thixotropic / non-slump

1 minutes

30 Type A

Carbon filled.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	675,000 cP (675,000 mPa*s)
Lap Shear	325 psi (2.24 MPa)
Durometer	30 Type A
Appearance	Black
Cure	24 hours / RTV
Elongation	350 %
Ionic Content Cl	<5 ppm
Ionic Content K	<1 ppm
Ionic Content Na	<6 ppm
Mix Ratio	1:1
Operating Temperature	-100 °C / 300 °C
Specific Gravity	1.05
Tear	30 ppi (5.29 kN/m)
Tensile	500 psi (3.45 MPa)
Thermal Conductivity	0.22 W/(mK)
Volume Resistivity	535 ohmcm
Work Time	1 minutes
Comment	Carbon filled.

EPM-2462

Platinum

Thixotropic / non-slump

2.75 hours

85 Type A

N/A

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	186,200 cP (186,200 mPa*s)
Durometer	85 Type A
Appearance	Tan
Cure	30 minutes / 150 C
Elongation	70 %
Ionic Content Cl	<5 ppm
Ionic Content K	<7 ppm
Ionic Content Na	<5 ppm
Mix Ratio	20:1
Specific Gravity	3.39
Tensile	525 psi (3.62 MPa)
Thermal Conductivity	1.2 W/(mK)
Volume Resistivity	0.01 ohmcm
Work Time	2.75 hours

FS-3730

Acetoxy

Thixotropic / non-slump

N/A

33 Type A

100%M Fluoro general all purpose adhesive for environments exposed to hydrocarbon fuels or solvents.

Product Details

Property	Average Result
Cure System	Acetoxy
Extrusion Rate	180 g/minute
Lap Shear	350 psi (2.41 MPa)
Durometer	33 Type A
Appearance	White
Cure	72 hours / RTV
Elongation	440 %
Mix Ratio	1 PART
Specific Gravity	1.4
Tack Free Time	25 minutes
Tear	55 ppi (9.7 kN/m)
Tensile	900 psi (6.21 MPa)
Comment	100%M Fluoro general all purpose adhesive for environments exposed to hydrocarbon fuels or solvents.

FS-3730-11

Acetoxy

Thixotropic / non-slump

N/A

40 Type A

Lap Shear after 7 days *1) 275 psi (1.9 MPa)

Product Details

Property	Average Result
Cure System	Acetoxy
Lap Shear	275 psi (1.9 MPa)
Durometer	40 Type A
Appearance	Dark Gray
Cure	72 hours / RTV
Elongation	275 %
Mix Ratio	1 PART
Specific Gravity	1.48
Tack Free Time	15 minutes
Tear	50 ppi (8.82 kN/m)
Tensile	700 psi (4.83 MPa)
Comment	Lap Shear after 7 days *1) 275 psi (1.9 MPa)

FS-3730-2

Acetoxy

Thixotropic / non-slump

N/A

40 Type A

Lap Shear after 7 days *3) 300 psi (2.1 MPa)

Product Details

Property	Average Result
Cure System	Acetoxy
Extrusion Rate	200 g/minute
Lap Shear	285 psi (1.97 MPa)
Durometer	40 Type A
Appearance	Black
Cure	72 hours / RTV
Elongation	315 %
Mix Ratio	1 PART
Non Volatile Content	100 %
Specific Gravity	1.41
Tack Free Time	10 minutes
Tear	50 ppi (8.82 kN/m)
Tensile	650 psi (4.48 MPa)
Comment	Lap Shear after 7 days *3) 300 psi (2.1 MPa)

FS-3775

Acetoxy

Flowable / Self Leveling

N/A

30 Type A

High Temperature, Fuel Resistant

Product Details

Property	Average Result
Cure System	Acetoxy
Extrusion Rate	250 g/minute
Lap Shear	210 psi (1.45 MPa)
Durometer	30 Type A
Appearance	Translucent
Cure	72 hours / RTV
Elongation	400 %
Mix Ratio	1 PART
Non Volatile Content	100 %
Specific Gravity	1.29
Tack Free Time	8 minutes
Tear	40 ppi (7.05 kN/m)
Tensile	450 psi (3.1 MPa)
Comment	High Temperature, Fuel Resistant

FS1-3730

Acetoxy

Thixotropic / non-slump

N/A

35 Type A

Bonds Aggressively

Product Details

Property	Average Result
Cure System	Acetoxy
Extrusion Rate	150 g/minute
Lap Shear	275 psi (1.9 MPa)
Durometer	35 Type A
Appearance	Translucent
Cure	7 days / 25 °C
Elongation	425 %
Mix Ratio	1 PART
Non Volatile Content	100 %
Operating Temperature	-65 °C / 240 °C
Specific Gravity	1.4
Tack Free Time	30 minutes
Tear	60 ppi (10.58 kN/m)
Tensile	850 psi (5.86 MPa)
Comment	Bonds Aggressively

FS3-3730

Acetoxy

Thixotropic / non-slump

N/A

35 Type A

100%M Fluoro general all purpose adhesive for environments exposed to hydrocarbon fuels or solvents. Translucent. 200 psi (1.4 MPa) lap shear.

Product Details

Property	Average Result
Cure System	Acetoxy
Extrusion Rate	230 g/minute
Lap Shear	200 psi (1.38 MPa)
Durometer	35 Type A
Appearance	Translucent
Cure	72 hours / RTV
Elongation	400 %
Specific Gravity	1.35
Tack Free Time	15 minutes
Tear	50 ppi (8.82 kN/m)
Tensile	820 psi (5.66 MPa)
Comment	100%M Fluoro general all purpose adhesive for environments exposed to hydrocarbon fuels or solvents. Translucent. 200 psi (1.4 MPa) lap shear.

FS9-3521

Platinum

Flowable / Self Leveling

3 hours

29 Type A

100% F, For applications requiring fuel and solvent resistance

Product Details

Property	Average Result
Cure System	Platinum
Extrusion Rate	50 g/minute
Lap Shear	280 psi (1.93 MPa)
Durometer	29 Type A
Appearance	Brown
Cure	24 hours / RTV
Elongation	300 %
Mix Ratio	1:1
Specific Gravity	1.4
Tensile	750 psi (5.17 MPa)
Work Time	3 hours
Comment	100% F, For applications requiring fuel and solvent resistance

MED-1000

Acetoxy

Flowable / Self Leveling

N/A

25 Type A

Medium flow, high extrusion rate

Product Details

Property	Average Result
Cure Type	RTV
Mix Ratio	1 PART
Rheology	Flowable / Self Leveling
Appearance	Translucent
Cure	72 hours / RTV
Cure System	Acetoxy
Durometer	25 Type A
Elongation	795 %
Extrusion Rate	2.5 g/minute
Specific Gravity	1.08
Substrate	Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate
Tack Free Time	12 minutes
Tear	75 ppi (13.23 kN/m)
Tensile	1,400 psi (9.66 MPa)
Comment	Medium flow, high extrusion rate

MED-1011

Acetoxy

Flowable / Self Leveling

N/A

25 Type A

Low flow

Product Details

Property	Average Result
Cure Type	RTV
Mix Ratio	1 PART
Rheology	Flowable / Self Leveling
Appearance	Translucent
Cure	72 hours / RTV
Cure System	Acetoxy
Durometer	25 Type A
Elongation	725 %
Extrusion Rate	90 g/minute
Flow Rate	1.1 in (27.94 mm)
Specific Gravity	1.12
Stress at Strain	115 psi / 200 % (0.79 MPa / 200 %)
Substrate	Primerless: Glass / Polyurethane / Silicone / Aluminum / Titanium / With Primer: Polycarbonate / Stainless steel
Tack Free Time	13 minutes
Tear	100 ppi (17.64 kN/m)
Tensile	1,400 psi (9.66 MPa)
Comment	Low flow

MED-1031

Oxime

Thixotropic / non-slump

N/A

35 Type A

Non-acidic leaving group

Product Details

Property	Average Result
Cure Type	RTV
Mix Ratio	1 PART
Rheology	Thixotropic / non-slump
Appearance	Translucent
Cure	7 days / RTV
Cure System	Oxime
Durometer	35 Type A
Elongation	310 %
Extrusion Rate	70 g/minute
Specific Gravity	1.1
Stress at Strain	415 psi / 200 % (2.86 MPa / 200 %)
Substrate	Primerless: Glass / Polyurethane / Aluminum / Silicone / Titanium
Tack Free Time	22 minutes
Tear	40 ppi (7.05 kN/m)
Tensile	840 psi (5.79 MPa)
Comment	Non-acidic leaving group

MED-1037

Acetoxy

Thixotropic / non-slump

N/A

30 Type A

Low-slump, solvent-free translucent silicone

Product Details

Property	Average Result
Cure Type	RTV
Mix Ratio	1 PART
Rheology	Thixotropic / non-slump
Appearance	Translucent
Cure	72 hours / RTV
Cure System	Acetoxy
Durometer	30 Type A
Elongation	565 %
Extrusion Rate	2.8 g/minute
Flow Rate	0.2 in (5.08 mm)
Specific Gravity	1.07
Stress at Strain	170 psi / 200 % (1.17 MPa / 200 %)
Substrate	Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate
Tack Free Time	9 minutes
Tensile	730 psi (5.03 MPa)
Comment	Low-slump, solvent-free translucent silicone

MED-1040

Acetoxy

Flowable / Self Leveling

N/A

23 Type A

High flow

Product Details

Property	Average Result
Cure Type	RTV
Mix Ratio	1 PART
Rheology	Flowable / Self Leveling
Appearance	Translucent
Cure	72 hours / RTV
Cure System	Acetoxy
Durometer	23 Type A
Elongation	340 %
Extrusion Rate	4 g/minute
Flow Rate	2.2 in (55.88 mm)
Specific Gravity	1.03
Substrate	Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium
Tack Free Time	9.5 minutes
Tear	17 ppi (3 kN/m)
Tensile	265 psi (1.83 MPa)
Comment	High flow

MED-1131

Oxime

Thixotropic / non-slump

N/A

35 Type A

Non-acidic leaving group

Product Details

Property	Average Result
Cure Type	RTV
Mix Ratio	1 PART
Rheology	Thixotropic / non-slump
Appearance	Translucent
Cure	7 days / RTV
Cure System	Oxime
Durometer	35 Type A
Elongation	330 %
Flow Rate	0.4 in (10.16 mm)
Specific Gravity	1.1
Substrate	Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium
Tack Free Time	20 minutes
Tear	45 ppi (7.94 kN/m)
Tensile	890 psi (6.14 MPa)
Comment	Non-acidic leaving group

MED-1137

Acetoxy

Thixotropic / non-slump

N/A

30 Type A

Low-slump, solvent-free translucent silicone

Product Details

Property	Average Result
Cure Type	RTV
Mix Ratio	1 PART
Rheology	Thixotropic / non-slump
Appearance	Translucent
Cure	72 hours / RTV
Cure System	Acetoxy
Durometer	30 Type A
Elongation	560 %
Extrusion Rate	180 g/minute
Flow Rate	0.2 in (5.08 mm)
Specific Gravity	1.07
Stress at Strain	170 psi / 200 % (1.17 MPa / 200 %)
Substrate	Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate
Tack Free Time	9 minutes
Tensile	700 psi (4.83 MPa)
Comment	Low-slump, solvent-free translucent silicone

MED-1511

Acetoxy

Flowable / Self Leveling

N/A

25 Type A

Low flow

Product Details

Property	Average Result
Cure Type	RTV
Mix Ratio	1 PART
Rheology	Flowable / Self Leveling
Appearance	Translucent
Cure	72 hours / RTV
Cure System	Acetoxy
Durometer	25 Type A
Elongation	680 %
Extrusion Rate	100 g/minute
Specific Gravity	1.12
Stress at Strain	130 psi / 200 % (0.9 MPa / 200 %)
Substrate	Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate / Stainless steel
Tack Free Time	12 minutes
Tear	95 ppi (16.75 kN/m)
Tensile	1,440 psi (9.93 MPa)
Comment	Low flow

MED-1540

Acetoxy

Flowable / Self Leveling

N/A

23 Type A

High flow

Product Details

Property	Average Result
Cure Type	RTV
Mix Ratio	1 PART
Rheology	Flowable / Self Leveling
Appearance	Translucent
Cure	72 hours / RTV
Cure System	Acetoxy
Durometer	23 Type A
Elongation	340 %
Flow Rate	2.7 in (68.58 mm)
Specific Gravity	1.03
Substrate	Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium
Tack Free Time	9.5 minutes
Tear	17 ppi (3 kN/m)
Tensile	265 psi (1.83 MPa)
Comment	High flow

MED-2000

Acetoxy

Flowable / Self Leveling

N/A

25 Type A

Medium flow, high extrusion rate

Product Details

Property	Average Result
Cure Type	RTV
Mix Ratio	1 PART
Rheology	Flowable / Self Leveling
Appearance	Translucent
Cure	72 hours / RTV
Cure System	Acetoxy
Durometer	25 Type A
Elongation	800 %
Extrusion Rate	2.5 g/minute
Specific Gravity	1.08
Stress at Strain	105 psi / 200 % (0.72 MPa / 200 %)
Substrate	Primerless: Glass / Polyurethane / Aluminum / Silicone / Titanium / With Primer: Polycarbonate
Tack Free Time	13 minutes
Tear	80 ppi (14.11 kN/m)
Tensile	1,375 psi (9.48 MPa)
Comment	Medium flow, high extrusion rate

MED1-4013

Platinum

Thixotropic / non-slump

N/A

20 Type A

Quick cure, high extrusion rate

Product Details

Property	Average Result
Cure Type	Heat Cure / RTV
Mix Ratio	1:1
Rheology	Thixotropic / non-slump
Appearance	Translucent
Cure	24 hours / RTV
Cure System	Platinum
Durometer	20 Type A
Elongation	800 %
Peel Strength	17 lbf/in (2.98 kN/m)
Specific Gravity	1.11
Stress at Strain	120 psi / 200 % (0.83 MPa / 200 %)
Substrate	Primerless: Glass / Aluminum / PMMA / Polycarbonate / Silicone / Polyurethane / With Primer: ABS / Polyetherimide / PEEK / Polycarbonate / Polyimide / Polysulphone / Stainless steel / Polyurethane
Tack Free Time	15 minutes
Tear	130 ppi (22.93 kN/m)
Tensile	1,000 psi (6.9 MPa)
Viscosity	80,000 cP (80,000 mPa*s)
Comment	Quick cure, high extrusion rate

MED1-4213

Platinum

Thixotropic / non-slump

15 minutes

20 Type A

Quick cure, high extrusion rate

Product Details

Property	Average Result
Cure Type	Heat Cure / RTV
Mix Ratio	1:1
Rheology	Thixotropic / non-slump
Work Time	15 minutes
Appearance	Translucent
Cure	24 hours / 25 °C
Cure System	Platinum
Durometer	20 Type A
Elongation	800 %
Specific Gravity	1.12
Substrate	Primerless: Aluminum / Glass / PMMA / Polyurethane / Silicone / Polycarbonate / With Primer: ABS / Polycarbonate / Polyimide / Polysulphone / Polyurethane / PEEK / Polyetherimide / Stainless steel
Tear	130 ppi (22.93 kN/m)
Tensile	1,000 psi (6.9 MPa)
Viscosity	80,000 cP (80,000 mPa*s)
Comment	Quick cure, high extrusion rate

MED2-4013

Platinum

Thixotropic / non-slump

N/A

15 Type A

Quick cure, high extrusion rate

Product Details

Property	Average Result
Cure Type	Heat Cure
Mix Ratio	1:1
Rheology	Thixotropic / non-slump
Appearance	Translucent
Cure	15 minutes / 150 °C
Cure System	Platinum
Durometer	15 Type A
Elongation	800 %
Peel Strength	26 lbf/in (4.55 kN/m)
Specific Gravity	1.12
Stress at Strain	80 psi / 200 % (0.55 MPa / 200 %)
Substrate	Primerless: Aluminum / Glass / PMMA / Silicone / With Primer: ABS / PEEK / Polycarbonate / Polyetherimide / Polyimide / Polysulphone / Polyurethane / Stainless steel
Tack Free Time	15 hours
Tear	130 ppi (22.93 kN/m)
Tensile	1,000 psi (6.9 MPa)
Viscosity	80,000 cP (80,000 mPa*s)
Comment	Quick cure, high extrusion rate

MED2-4213

Platinum

Thixotropic / non-slump

15 hours

15 Type A

Quick cure, high extrusion rate

Product Details

Property	Average Result
Cure Type	Heat Cure
Mix Ratio	1:1
Rheology	Thixotropic / non-slump
Work Time	15 hours
Appearance	Translucent
Cure	15 minutes / 150 °C
Cure System	Platinum
Durometer	15 Type A
Elongation	800 %
Specific Gravity	1.12
Substrate	Primerless: Aluminum / Glass / PMMA / Silicone / With Primer: Plastic / Polycarbonate / Polyetherimide / Polysulphone / PEEK / Stainless steel / Polyimide / Polyurethane
Tear	130 ppi (22.93 kN/m)
Tensile	1,000 psi (6.9 MPa)
Viscosity	80,000 cP (80,000 mPa*s)
Comment	Quick cure, high extrusion rate

MED3-4013

Platinum

Thixotropic / non-slump

N/A

20 Type A

Quick cure, high extrusion rate

Product Details

Property	Average Result
Cure Type	Heat Cure / RTV
Mix Ratio	1:1
Rheology	Thixotropic / non-slump
Appearance	Translucent
Cure	24 hours / RTV
Cure System	Platinum
Durometer	20 Type A
Elongation	800 %
Peel Strength	23 lbf/in (4.03 kN/m)
Specific Gravity	1.12
Stress at Strain	125 psi / 200 % (0.86 MPa / 200 %)
Substrate	Primerless: Aluminum / PMMA / Polyurethane / Glass / Polycarbonate / Silicone / With Primer: PEEK / Polyetherimide / Polysulphone / ABS / Polycarbonate / Stainless steel / Polyimide / Polyurethane
Tack Free Time	60 minutes
Tear	130 ppi (22.93 kN/m)
Tensile	1,000 psi (6.9 MPa)
Viscosity	80,000 cP (80,000 mPa*s)
Comment	Quick cure, high extrusion rate

MED3-4213

Platinum

Thixotropic / non-slump

60 minutes

20 Type A

Quick cure, high extrusion rate

Product Details

Property	Average Result
Cure Type	Heat Cure / RTV
Mix Ratio	1:1
Rheology	Thixotropic / non-slump
Work Time	60 minutes
Appearance	Translucent
Cure	24 hours / 25 °C
Cure System	Platinum
Durometer	20 Type A
Elongation	800 %
Specific Gravity	1.12
Substrate	Primerless: Aluminum / Glass / PMMA / Polycarbonate / Polyurethane / Silicone / With Primer: ABS / PEEK / Polycarbonate / Polyetherimide / Polyimide / Polysulphone / Polyurethane / Stainless steel
Tear	130 ppi (22.93 kN/m)
Tensile	1,000 psi (6.9 MPa)
Viscosity	80,000 cP (80,000 mPa*s)
Comment	Quick cure, high extrusion rate

R-1130

Oxime

Thixotropic / non-slump

N/A

35 Type A

Non-slump. Adhesive for a variety of substrates on or near electronic components. 485 psi (3.6 MPa), primed (SP-120) lap shear.

Product Details

Property	Average Result
Cure System	Oxime
Extrusion Rate	70 g/minute
Lap Shear	485 psi (3.34 MPa)
Durometer	35 Type A
Appearance	Translucent
Cure	7 days / RTV
Elongation	325 %
Flow Rate	0.5 in (12.7 mm)
Mix Ratio	1 PART
Non Volatile Content	100 %
Specific Gravity	1.1
Tack Free Time	25 minutes
Tear	40 ppi (7.05 kN/m)
Tensile	850 psi (5.86 MPa)
Comment	Non-slump. Adhesive for a variety of substrates on or near electronic components. 485 psi (3.6 MPa), primed (SP-120) lap shear.

R-1140

Acetoxy

Thixotropic / non-slump

N/A

30 Type A

Non-slump. General all purpose adhesive for a variety of substrates. 625 psi (4.3 MPa), primed (SP-120) lap shear.

Product Details

Property	Average Result
Cure System	Acetoxy
Lap Shear	625 psi (4.31 MPa)
Durometer	30 Type A
Appearance	Translucent
Cure	72 hours / RTV
Elongation	350 %
Flow Rate	1.5 in (38.1 mm)
Mix Ratio	1 PART
Non Volatile Content	100 %
Specific Gravity	1.09
Tack Free Time	7 minutes
Tear	40 ppi (7.05 kN/m)
Tensile	700 psi (4.83 MPa)
Comment	Non-slump. General all purpose adhesive for a variety of substrates. 625 psi (4.3 MPa), primed (SP-120) lap shear.

R-1400

Platinum

Thixotropic / non-slump

N/A

19 Type A

Thixotropic, dispensable, and 0.5mm maximum slump. Shipped and stored frozen.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	400,000 cP (400,000 mPa*s)
Extrusion Rate	120 g/minute
Durometer	19 Type A
Appearance	Black
Cure	15 minutes / 200 °C
Dielectric Strength	400 volts/mil (15.6 kV/mm)
Elongation	750 %
Mix Ratio	1 PART
Specific Gravity	1.18
Stress at Strain	50 psi / 100 % (0.34 MPa / 100 %)
Tear	110 ppi (19.4 kN/m)
Tensile	825 psi (5.69 MPa)
Comment	Thixotropic, dispensable, and 0.5mm maximum slump. Shipped and stored frozen.

R-2141

N/A

Flowable / Self Leveling

1.5 hours

40 Type A

N/A

Product Details

Property	Average Result
Viscosity	180,000 cP (180,000 mPa*s)
Durometer	40 Type A
Appearance	Translucent
Dielectric Strength	630 volts/mil (24.57 kV/mm)
Elongation	250 %
Flow Rate	0.3 in (7.62 mm)
Specific Gravity	1.1
Tack Free Time	4 hours
Tensile	650 psi (4.48 MPa)
Volatile Content	0.3 %
Work Time	1.5 hours

R-2145

Platinum

Flowable / Self Leveling

15 minutes

45 Type A

Primerless Adhesive;Gray, tough, fast cure adhesive. Will RTV. 145 psi (1.0 MPa), unprimed and 600 psi (4.1 MPa) primed (CF1-135) lap shear.

Product Details

Property	Average Result
Cure System	Platinum
Extrusion Rate	180 g/minute
Lap Shear	145 psi (1 MPa)
Durometer	45 Type A
Appearance	Dark Gray
Cure	2 hours / 65 °C
Dielectric Strength	825 volts/mil (32.18 kV/mm)
Elongation	400 %
Mix Ratio	1:1
Specific Gravity	1.17
Stress at Strain	525 psi / 200 % (3.62 MPa / 200 %)
Tear	150 ppi (26.46 kN/m)
Tensile	1,050 psi (7.24 MPa)
Work Time	15 minutes
Comment	Primerless Adhesive;Gray, tough, fast cure adhesive. Will RTV. 145 psi (1.0 MPa), unprimed and 600 psi (4.1 MPa) primed (CF1-135) lap shear.

R-2160

Platinum

Flowable / Self Leveling

1.5 hours

20 Type A

Iron Red, flowable legacy high performance elastomer at elevated temperatures.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	280,000 cP (280,000 mPa*s)
Durometer	20 Type A
Appearance	Red
Cure	30 minutes / 150 °C
Dielectric Strength	500 volts/mil (19.5 kV/mm)
Elongation	625 %
Mix Ratio	10:1
Non Volatile Content	100 %
Operating Temperature	-65 °C / 315 °C
Specific Gravity	1.2
Tear	140 ppi (24.69 kN/m)
Tensile	750 psi (5.17 MPa)
Volume Resistivity	100,000,000,000,000 ohmcm
Work Time	1.5 hours
Comment	Iron Red, flowable legacy high performance elastomer at elevated temperatures.

R-2186

Platinum

Flowable / Self Leveling

2.5 hours

30 Type A

Legacy general all purpose adhesive. 475 psi (3.3 MPa), primed (CF1-135) lap shear.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	83,000 cP (83,000 mPa*s)
Lap Shear	475 psi (3.28 MPa)
Durometer	30 Type A
Appearance	Translucent
Cure	15 minutes / 150 °C
Dielectric Strength	640 volts/mil (24.96 kV/mm)
Elongation	450 %
Mix Ratio	10:1
Operating Temperature	-65 °C / 240 °C
Specific Gravity	1.12
Tear	100 ppi (17.64 kN/m)
Tensile	1,050 psi (7.24 MPa)
Work Time	2.5 hours
Comment	Legacy general all purpose adhesive. 475 psi (3.3 MPa), primed (CF1-135) lap shear.

R-2550

Alkoxy

Flowable / Self Leveling

6 hours

35 Type A

Resists breakdown at high temperatures. Translucent and 1 hr. pot life. Not recommended for deep section cures.

Product Details

Property	Average Result
Cure System	Alkoxy
Viscosity	9,000 cP (9,000 mPa*s)
Durometer	35 Type A
Appearance	Translucent
Cure	7 days / RTV
Elongation	175 %
Mix Ratio	100:0.5
Non Volatile Content	100 %
Operating Temperature	-115 °C / 260 °C
Refractive Index	1.43
Specific Gravity	1.08
Tear	20 ppi (3.53 kN/m)
Tensile	500 psi (3.45 MPa)
Work Time	6 hours
Comment	Resists breakdown at high temperatures. Translucent and 1 hr. pot life. Not recommended for deep section cures.

R-2560

Alkoxy

Flowable / Self Leveling

1 minutes

55 Type A

Resists breakdown at high temperatures. Red and 1 hr. pot life. Not recommended for deep section cures.

Product Details

Property	Average Result
Cure System	Alkoxy
Viscosity	31,000 cP (31,000 mPa*s)
Lap Shear	385 psi (2.66 MPa)
Durometer	55 Type A
Appearance	Red
Cure	7 days / RTV
Elongation	125 %
Mix Ratio	100:0.5
Non Volatile Content	100 %
Operating Temperature	-115 °C / 260 °C
Specific Gravity	1.41
Tack Free Time	2 hours
Tensile	700 psi (4.83 MPa)
Work Time	1 minutes
Comment	Resists breakdown at high temperatures. Red and 1 hr. pot life. Not recommended for deep section cures.

R-2630

Platinum

Flowable / Self Leveling

15 hours

60 Type A

Carbon filled.

Product Details

Property	Average Result
Cure System	Platinum
Durometer	60 Type A
Appearance	Black
Cure	30 minutes / 150 °C
Elongation	95 %
Mix Ratio	10:1
Operating Temperature	-65 °C / 200 °C
Specific Gravity	1.1
Tear	40 ppi (7.05 kN/m)
Tensile	690 psi (4.76 MPa)
Volume Resistivity	6 ohmcm
Work Time	15 hours
Comment	Carbon filled.

R-2634

Alkoxy

Thixotropic / non-slump

3 hours

80 Type A

200 psi lap shear primed w/SP-121. Conductive at elevated temperatures.

Product Details

Property	Average Result
Cure System	Alkoxy
Extrusion Rate	160 g/minute
Lap Shear	200 psi (1.38 MPa)
Durometer	80 Type A
Appearance	Gray
Cure	7 days / RTV
Elongation	90 %
Flow Rate	1.2 in (30.48 mm)
Mix Ratio	100:0.5
Specific Gravity	3.41
Tear	50 ppi (8.82 kN/m)
Tensile	250 psi (1.72 MPa)
Volume Resistivity	0 ohmcm
Work Time	3 hours
Comment	200 psi lap shear primed w/SP-121. Conductive at elevated temperatures.

R-2682-12

Platinum

N/A

For applications requiring shorter processing times, easy clean-up, and consistent bond thickness. Adheres to silicone, and some metals or plastics. Sheet is 0.013 inches (0.3 mm) and cures on surfaces where the Activator is applied. Cures at room temperature or rapidly with heat.

Product Details

Property	Average Result
Cure System	Platinum
Lap Shear	100 psi (0.69 MPa)
Appearance	Translucent
Application Life	4 minutes
Cure	4 hours / 65 °C
Comment	For applications requiring shorter processing times, easy clean-up, and consistent bond thickness. Adheres to silicone, and some metals or plastics. Sheet is 0.013 inches (0.3 mm) and cures on surfaces where the Activator is applied. Cures at room temperature or rapidly with heat.

R1-2145

Platinum

Flowable / Self Leveling

1 minutes

45 Type A

Primerless Adhesive;Gray tough, fast cure adhesive with 1 hour pot life. Will RTV. 145 psi (1.0 MPa), unprimed and 625 psi (4.3 MPa) primed (CF1-135) lap shear.

Product Details

Property	Average Result
Cure System	Platinum
Extrusion Rate	140 g/minute
Lap Shear	145 psi (1 MPa)
Durometer	45 Type A
Appearance	Dark Gray
Cure	2 hours / 65 °C
Dielectric Strength	825 volts/mil (32.18 kV/mm)
Elongation	400 %
Mix Ratio	1:1
Specific Gravity	1.16
Stress at Strain	525 psi / 200 % (3.62 MPa / 200 %)
Tear	190 ppi (33.51 kN/m)
Tensile	1,000 psi (6.9 MPa)
Work Time	1 minutes
Comment	Primerless Adhesive;Gray tough, fast cure adhesive with 1 hour pot life. Will RTV. 145 psi (1.0 MPa), unprimed and 625 psi (4.3 MPa) primed (CF1-135) lap shear.

R31-2186

Platinum

Flowable / Self Leveling

15 minutes

20 Type A

RTV Primerless Adhesive;Very fast cure.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	142,500 cP (142,500 mPa*s)
Extrusion Rate	15 g/minute
Lap Shear	110 psi (0.76 MPa)
Durometer	20 Type A
Appearance	Translucent
Cure	24 hours / RTV
Dielectric Strength	905 volts/mil (35.3 kV/mm)
Elongation	775 %
Flow Rate	0.5 in (12.7 mm)
Mix Ratio	1:1
Specific Gravity	1.12
Tear	125 ppi (22.05 kN/m)
Tensile	1,000 psi (6.9 MPa)
Work Time	15 minutes
Comment	RTV Primerless Adhesive;Very fast cure.

R32-2186

Platinum

Flowable / Self Leveling

15 hours

15 Type A

Primerless Adhesive;Heat Cure. Flow 0.5 per 5 minutes. Requires heat to cure. 150 psi (1.0 MPa), unprimed lap shear.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	170,000 cP (170,000 mPa*s)
Extrusion Rate	15 g/minute
Lap Shear	150 psi (1.03 MPa)
Durometer	15 Type A
Appearance	Translucent
Cure	15 minutes / 150 °C
Dielectric Strength	905 volts/mil (35.3 kV/mm)
Elongation	850 %
Flow Rate	0.5 in (12.7 mm)
Mix Ratio	1:1
Specific Gravity	1.12
Stress at Strain	35 psi / 100 % (0.24 MPa / 100 %)
Tear	125 ppi (22.05 kN/m)
Tensile	975 psi (6.72 MPa)
Work Time	15 hours
Comment	Primerless Adhesive;Heat Cure. Flow 0.5 per 5 minutes. Requires heat to cure. 150 psi (1.0 MPa), unprimed lap shear.

R33-2186

Platinum

Flowable / Self Leveling

2 hours

20 Type A

RTV Primerless Adhesive;Fast cure.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	124,350 cP (124,350 mPa*s)
Durometer	20 Type A
Appearance	Translucent
Cure	24 hours / RTV
Elongation	725 %
Mix Ratio	1:1
Operating Temperature	-65 °C / 240 °C
Specific Gravity	1.12
Tear	150 ppi (26.46 kN/m)
Tensile	1,000 psi (6.9 MPa)
Work Time	2 hours
Comment	RTV Primerless Adhesive;Fast cure.

R33-2186-1

N/A

Flowable / Self Leveling

2 hours

20 Type A

N/A

Product Details

Property	Average Result
Viscosity	80,000 cP (80,000 mPa*s)
Durometer	20 Type A
Appearance	White
Elongation	740 %
Specific Gravity	1.12
Tear	135 ppi (23.81 kN/m)
Tensile	1,000 psi (6.9 MPa)
Work Time	2 hours

R4-1140

Acetoxy

Flowable / Self Leveling

N/A

25 Type A

Primerless Adhesive;Self leveling. General all purpose adhesive for a variety of substrates.

Product Details

Property	Average Result
Cure System	Acetoxy
Extrusion Rate	100 g/minute
Durometer	25 Type A
Appearance	Translucent
Cure	72 hours / RTV
Elongation	750 %
Flow Rate	2 in (50.8 mm)
Mix Ratio	1 PART
Specific Gravity	1.12
Stress at Strain	110 psi / N/A (0.76 MPa / N/A)
Tack Free Time	10 minutes
Tear	100 ppi (17.64 kN/m)
Tensile	1,400 psi (9.66 MPa)
Volatile Content	2.4 %
Comment	Primerless Adhesive;Self leveling. General all purpose adhesive for a variety of substrates.

SCV-2585

Platinum

Flowable / Self Leveling

1 hours

35 Type A

Ultra low Outgassing. Recommended for broad temperature applications. 475 psi (3.3 MPa), primed (CF1-135) lap shear.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	77,000 cP (77,000 mPa*s)
Lap Shear	475 psi (3.28 MPa)
Durometer	35 Type A
Appearance	Translucent
Cure	15 minutes / 150 °C
Elongation	300 %
Mix Ratio	1:1
Specific Gravity	1.11
Tack Free Time	7 hours
Tear	40 ppi (7.05 kN/m)
Tensile	700 psi (4.83 MPa)
Work Time	1 hours
Comment	Ultra low Outgassing. Recommended for broad temperature applications. 475 psi (3.3 MPa), primed (CF1-135) lap shear.

SCV-2586

Platinum

Thixotropic / non-slump

4 hours

45 Type A

Fast Cure, Low Density, Primed Lap Shear 175psi

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	325,000 cP (325,000 mPa*s)
Lap Shear	175 psi (1.21 MPa)
Durometer	45 Type A
Appearance	Red
Cure	30 minutes / 150 °C
Elongation	150 %
Mix Ratio	1:1
Specific Gravity	0.74
Tensile	225 psi (1.55 MPa)
Work Time	4 hours
Comment	Fast Cure, Low Density, Primed Lap Shear 175psi

SCV-2590

Platinum

Flowable / Self Leveling

N/A

45 Type A

Pourable

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	9,500 cP (9,500 mPa*s)
Lap Shear	375 psi (2.59 MPa)
Durometer	45 Type A
Appearance	Clear
Cure	15 minutes / 150 °C
Elongation	125 %
Mix Ratio	10:1
Specific Gravity	1.02
Tensile	950 psi (6.55 MPa)
Comment	Pourable

SCV-2590-2

Platinum

Flowable / Self Leveling

4.5 hours

50 Type A

Low Viscosity, Fast Cure

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	9,500 cP (9,500 mPa*s)
Durometer	50 Type A
Appearance	Black
Cure	30 minutes / 150 °C
Dielectric Strength	850 volts/mil (33.15 kV/mm)
Elongation	150 %
Mix Ratio	10:1
Specific Gravity	1.06
Tack Free Time	15 minutes
Tensile	950 psi (6.55 MPa)
Work Time	4.5 hours
Comment	Low Viscosity, Fast Cure

SCV1-2590

Platinum

Flowable / Self Leveling

4 hours

50 Type A

*4) Primed Lap Shear 175 psi (1.2 MPa)

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	3,300 cP (3,300 mPa*s)
Lap Shear	175 psi (1.21 MPa)
Durometer	50 Type A
Appearance	Clear
Cure	15 minutes / 150 °C
Elongation	90 %
Mix Ratio	1:1
Specific Gravity	1.02
Tensile	925 psi (6.38 MPa)
Work Time	4 hours
Comment	*4) Primed Lap Shear 175 psi (1.2 MPa)

SCV2-2590

Platinum

Flowable / Self Leveling

N/A

45 Type A

Low / High Temperature, *4) Primed Lap Shear 250 psi (1.7 MPa)

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	6,500 cP (6,500 mPa*s)
Lap Shear	250 psi (1.72 MPa)
Durometer	45 Type A
Appearance	Clear
Cure	4 hours / 65 °C
Elongation	85 %
Mix Ratio	10:1
Refractive Index	1.43
Specific Gravity	1.04
Tensile	475 psi (3.28 MPa)
Comment	Low / High Temperature, *4) Primed Lap Shear 250 psi (1.7 MPa)

Coatings/Dispersions

Product

Cure System

Viscosity

Non Volatile Content

Durometer

Data Sheet

Comment

CV-1144-0

Oxime

240 cP

60 %

N/A

60% Solids, Atomic Oxygen Protective Overcoat

Product Details

Property	Average Result
Viscosity	240 cP (240 mPa*s)
Non Volatile Content	60 %
Appearance	Clear
Tack Free Time	50 minutes
Cure	7 days / RTV
Cure System	Oxime
Mix Ratio	1 PART
Refractive Index	1.43
Specific Gravity	1
Comment	60% Solids, Atomic Oxygen Protective Overcoat

CV-1146-2

Oxime

2,400 cP

72 %

N/A

72% Solids

Product Details

Property	Average Result
Viscosity	2,400 cP (2,400 mPa*s)
Non Volatile Content	72 %
Appearance	Black
Cure	7 days / RTV
Cure System	Oxime
Dielectric Strength	845 volts/mil (32.96 kV/mm)
Mix Ratio	1 PART
Specific Gravity	1.26
Comment	72% Solids

CV-1152

Oxime

7,300 cP

N/A

Soft, very low modulus coating

Product Details

Property	Average Result
Viscosity	7,300 cP (7,300 mPa*s)
Appearance	Translucent
Tack Free Time	50 minutes
Cure	7 days / RTV
Cure System	Oxime
Mix Ratio	1 PART
Refractive Index	1.43
Specific Gravity	1.01
Comment	Soft, very low modulus coating

CV1-1144-0

Oxime

850 cP

50 %

N/A

50% Solids

Product Details

Property	Average Result
Viscosity	850 cP (850 mPa*s)
Non Volatile Content	50 %
Appearance	Translucent
Tack Free Time	10 minutes
Cure	7 days / RTV
Cure System	Oxime
Mix Ratio	1 PART
Specific Gravity	1.11
Comment	50% Solids

CV1-1146-2

Oxime

1,125 cP

N/A

Product Details

Property	Average Result
Viscosity	1,125 cP (1,125 mPa*s)
Appearance	Black
Tack Free Time	2 hours
Cure System	Oxime

CV1-1148

Oxime

5,000 cP

40 %

N/A

40% Solids

Product Details

Property	Average Result
Viscosity	5,000 cP (5,000 mPa*s)
Non Volatile Content	40 %
Appearance	Black
Tack Free Time	40 minutes
Cure	7 days / RTV
Cure System	Oxime
Mix Ratio	1 PART
Specific Gravity	1.07
Comment	40% Solids

CV2-1147

Oxime

2,000 cP

60 %

N/A

60% Solids, Non-blocking Overcoat

Product Details

Property	Average Result
Viscosity	2,000 cP (2,000 mPa*s)
Non Volatile Content	60 %
Appearance	Translucent
Tack Free Time	2 hours
Cure	7 days / RTV
Cure System	Oxime
Mix Ratio	1 PART
Specific Gravity	1.12
Comment	60% Solids, Non-blocking Overcoat

CV3-1144-1

Oxime

900 cP

60 %

N/A

60% Solids

Product Details

Property	Average Result
Viscosity	900 cP (900 mPa*s)
Non Volatile Content	60 %
Appearance	White
Cure	7 days / RTV
Cure System	Oxime
Mix Ratio	1 PART
Comment	60% Solids

MED-2014

Platinum

1,800 cP

35 %

N/A

One Part, Requires heat to cure

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	1,800 cP (1,800 mPa*s)
Non Volatile Content	35 %
Appearance	Translucent
Cure	60 minutes / 50 °C 60 minutes / 150 °C 3 minutes / RTV
Elongation	900 %
Mix Ratio	1 PART
Solvent	Xylene
Tear	160 ppi (28.22 kN/m)
Tensile	1,700 psi (11.72 MPa)
Comment	One Part, Requires heat to cure

MED-2214

Platinum

3,700 cP

35 %

35 Type A

One Part, Requires heat to cure

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	3,700 cP (3,700 mPa*s)
Non Volatile Content	35 %
Durometer	35 Type A
Appearance	Translucent
Cure	60 minutes / 50 °C
Elongation	850 %
Mix Ratio	1 Part
Tear	170 ppi (29.98 kN/m)
Tensile	1,700 psi (11.72 MPa)
Comment	One Part, Requires heat to cure

MED-4159

Amine

200 cSt

53 %

N/A

Low Crosslink Density, Amino Functional Lubricious Silicone Coating

Product Details

Property	Average Result
Cure System	Amine
Viscosity	200 cSt
Non Volatile Content	53 %
Appearance	Clear
Cure	7 days / RTV
Mix Ratio	1 PART
Solvent	Stoddard Solvent & IPA
Comment	Low Crosslink Density, Amino Functional Lubricious Silicone Coating

MED-4162

Non-Curing

27,000 cP

31 %

N/A

Lubricious Coating

Product Details

Property	Average Result
Cure System	Non-Curing
Viscosity	27,000 cP (27,000 mPa*s)
Non Volatile Content	31 %
Appearance	Translucent
Mix Ratio	1 PART
Solvent	Xylene
Comment	Lubricious Coating

MED-6400

Platinum

860 cP

35 %

30 Type A

1.43 R.I. in Xylene

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	860 cP (860 mPa*s)
Non Volatile Content	35 %
Durometer	30 Type A
Appearance	Translucent
Cure	30 minutes / 25 °C 45 minutes / 75 °C 135 minutes / 150 °C
Cure Type	Heat Cure
Elongation	850 %
Mix Ratio	1:1
Refractive Index	1.43
Rheology	Flowable/Self Leveling
Tear	160 ppi (28.22 kN/m)
Tensile	1,600 psi (11.03 MPa)

MED-6600

Platinum

350 cP

35 %

25 Type A

1.46 R.I. in Xylene

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	350 cP (350 mPa*s)
Non Volatile Content	35 %
Durometer	25 Type A
Appearance	Translucent
Cure	30 minutes / 25 °C 45 minutes / 75 °C 135 minutes / 150 °C
Elongation	800 %
Mix Ratio	1:1
Refractive Index	1.46
Specific Gravity	1.1
Stress at Strain	300 psi / 300 % (2.07 Mpa / 300 %)
Tear	160 ppi (28.22 kN/m)
Tensile	1,200 psi (8.28 MPa)
Work Time	24 hours
Comment	1.46 R.I. in Xylene

MED-6601

N/A

24 Type A

100% solids

Product Details

Property	Average Result
Durometer	24 Type A
Appearance	Translucent
Elongation	800 %
Stress at Strain	320 psi / 300 % (2.21 Mpa / 300 %)
Tear	150 ppi (26.46 kN/m)
Tensile	1,200 psi (8.28 MPa)
Comment	100% solids

MED-6605

Acetoxy

700 cP

29 %

25 Type A

One Part, in Xylene

Product Details

Property	Average Result
Cure System	Acetoxy
Viscosity	700 cP (700 mPa*s)
Non Volatile Content	29 %
Durometer	25 Type A
Appearance	Translucent
Cure	5 days / RTV
Elongation	980 %
Mix Ratio	1 PART
Refractive Index	1.40
Specific Gravity	1.09
Stress at Strain	110 psi / 300 % (0.76 Mpa / 300 %)
Tear	120 ppi (21.16 kN/m)
Tensile	1,500 psi (10.34 MPa)
Comment	One Part, in Xylene

MED-6615

Platinum

65 cP

32 %

72 Type 00

Silicone adhesive dispersed in heptane, cures rapidly with heat

Product Details

Property	Average Result
Cure Type	Heat Cure
Mix Ratio	1:1
Rheology	Flowable / Self Leveling
Appearance	Translucent
Cure	30 minutes / RTV
Cure System	Platinum
Durometer	72 Type 00
Elongation	750 %
Non Volatile Content	32 %
Substrate	Primerless: Aluminum / Glass / PMMA / Silicone / With Primer: ABS / PEEK / Polycarbonate / Polyimide / Polysulphone / Polyetherimide / Polyurethane / Stainless steel
Tear	120 ppi (21.16 kN/m)
Tensile	1,060 psi (7.31 MPa)
Viscosity	65 cP (65 mPa*s)
Comment	Silicone adhesive dispersed in heptane, cures rapidly with heat

MED-6640

Platinum

3,000 cP

20 %

40 Type A

Ultra High Tear, in Xylene

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	3,000 cP (3,000 mPa*s)
Non Volatile Content	20 %
Durometer	40 Type A
Appearance	Translucent
Cure	30 minutes / 25 °C 45 minutes / 75 °C 135 minutes / 150 °C
Elongation	1,000 %
Mix Ratio	1:1
Refractive Index	1.41
Specific Gravity	1.41
Stress at Strain	150 psi / 100 % (1.03 MPa / 100 %)
Tear	300 ppi (52.91 kN/m)
Tensile	1,700 psi (11.72 MPa)
Work Time	24 hours
Comment	Ultra High Tear, in Xylene

MED-6655

Acetoxy

700 cP

60 %

35 Type A

100M% Fluorosilicone

Product Details

Property	Average Result
Cure System	Acetoxy
Viscosity	700 cP (700 mPa*s)
Non Volatile Content	60 %
Durometer	35 Type A
Appearance	White
Cure	3 days / RTV
Cure Type	RTV
Elongation	425 %
Mix Ratio	1 PART
Rheology	Flowable / Self Leveling
Tack Free Time	80 minutes
Tear	45 ppi (7.94 kN/m)
Tensile	775 psi (5.34 MPa)
Comment	100M% Fluorosilicone

MED-6670

Platinum

N/A

25 %

N/A

Low Coefficient of Friction Coating

Product Details

Property	Average Result
Cure System	Platinum
Non Volatile Content	25 %
Appearance	Translucent
Cure	5 minutes / RTV
Mix Ratio	1:1
Specific Gravity	0.96
Work Time	24 hours
Comment	Low Coefficient of Friction Coating

MED-6671

Acetoxy

N/A

RTV, Low Coefficient of Friction Coating

Product Details

Property	Average Result
Cure System	Acetoxy
Appearance	Translucent
Cure	24 hours / RTV
Mix Ratio	1 Part
Comment	RTV, Low Coefficient of Friction Coating

MED1-4161

Condensation

140 cSt

33 %

25 Type 00

25 '00' durometer lubricious coating

Product Details

Property	Average Result
Cure System	Condensation
Viscosity	140 cSt (121.43 mPa*s)
Non Volatile Content	33 %
Durometer	25 Type 00
Appearance	Clear
Cure	5 days / 25 °C
Mix Ratio	1 Part
Solvent	Xylene
Specific Gravity	0.87
Comment	25 '00' durometer lubricious coating

MED10-4161

Amine

140 cSt

33 %

25 Type 00

Amino Functional Lubricious Silicone Coating

Product Details

Property	Average Result
Cure System	Amine
Viscosity	140 cSt (120.04 mPa*s)
Non Volatile Content	33 %
Durometer	25 Type 00
Appearance	Clear
Cure	5 days / 25 °C
Mix Ratio	1 PART
Solvent	Xylene
Specific Gravity	0.86
Comment	Amino Functional Lubricious Silicone Coating

MED10-6400

Platinum

800 cP

35 %

30 Type A

1.43 R.I.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	800 cP (800 mPa*s)
Non Volatile Content	35 %
Durometer	30 Type A
Appearance	Translucent
Cure	30 minutes / 25 °C 45 minutes / 75 °C 135 minutes / 150 °C
Elongation	800 %
Mix Ratio	1:1
Solvent	Xylene
Tear	150 ppi (26.46 kN/m)
Tensile	1,500 psi (10.34 MPa)
Comment	1.43 R.I.

MED10-6600

Platinum

400 cP

35 %

25 Type A

1.46 R.I.

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	400 cP (400 mPa*s)
Non Volatile Content	35 %
Durometer	25 Type A
Appearance	Translucent
Cure	30 minutes / 25 °C 45 minutes / 75 °C 135 minutes / 150 °C
Elongation	750 %
Mix Ratio	1:1
Refractive Index	1.46
Solvent	Xylene
Stress at Strain	325 psi / 300 % (2.24 Mpa / 300 %)
Tear	145 ppi (25.57 kN/m)
Tensile	1,200 psi (8.28 MPa)
Comment	1.46 R.I.

MED10-6605

Acetoxy

700 cP

29 %

25 Type A

One Part

Product Details

Property	Average Result
Cure System	Acetoxy
Viscosity	700 cP (700 mPa*s)
Non Volatile Content	29 %
Durometer	25 Type A
Appearance	Translucent
Cure	5 days / RTV
Elongation	950 %
Mix Ratio	1 PART
Solvent	Xylene
Stress at Strain	160 psi / 300 % (1.1 Mpa / 300 %)
Tear	125 ppi (22.05 kN/m)
Tensile	1,500 psi (10.34 MPa)
Comment	One Part

MED10-6607

Oxime

6,000 cP

35 %

40 Type A

One Part

Product Details

Property	Average Result
Cure System	Oxime
Viscosity	6,000 cP (6,000 mPa*s)
Non Volatile Content	35 %
Durometer	40 Type A
Appearance	Translucent
Cure	7 days / RTV
Elongation	650 %
Mix Ratio	1 PART
Solvent	Naptha
Specific Gravity	1.1
Tear	95 ppi (16.75 kN/m)
Tensile	1,200 psi (8.28 MPa)
Comment	One Part

MED10-6615

Platinum

65 cP

32 %

72 Type 00

Silicone adhesive dispersed in heptane, cures rapidly with heat

Product Details

Property	Average Result
Cure Type	Heat Cure
Mix Ratio	1:1
Rheology	Flowable / Self Leveling
Appearance	Translucent
Cure	30 minutes / RTV
Cure System	Platinum
Durometer	72 Type 00
Elongation	750 %
Non Volatile Content	32 %
Substrate	Primerless: Aluminum / Glass / PMMA / Silicone / With Primer: PEEK / Polycarbonate / Polyetherimide / ABS / Polyimide / Polysulphone / Polyurethane / Stainless steel
Tear	120 ppi (21.16 kN/m)
Tensile	1,060 psi (7.31 MPa)
Viscosity	65 cP (65 mPa*s)
Comment	Silicone adhesive dispersed in heptane, cures rapidly with heat

MED10-6640

Platinum

2,500 cP

20 %

40 Type A

Ultra High Tear

Product Details

Property	Average Result
Cure System	Platinum
Viscosity	2,500 cP (2,500 mPa*s)
Non Volatile Content	20 %
Durometer	40 Type A
Appearance	Translucent
Cure	30 minutes / 25 °C 45 minutes / 75 °C 135 minutes / 150 °C
Elongation	1,000 %
Mix Ratio	1:1
Refractive Index	1.41
Solvent	Xylene
Stress at Strain	150 psi / 100 % (1.03 MPa / 100 %)
Tear	300 ppi (52.91 kN/m)
Tensile	1,700 psi (11.72 MPa)
Comment	Ultra High Tear

MED10-6655

Acetoxy

700 cP

60 %

35 Type A

100M% Fluorosilicone

Product Details

Property	Average Result
Cure System	Acetoxy
Viscosity	700 cP (700 mPa*s)
Non Volatile Content	60 %
Durometer	35 Type A
Appearance	White
Cure	3 days / RTV
Elongation	425 %
Mix Ratio	1 PART
Solvent	Butyl Acetate
Tear	45 ppi (7.94 kN/m)
Tensile	775 psi (5.34 MPa)
Comment	100M% Fluorosilicone

MED10-6670

Platinum

N/A

25 %

N/A

Low Coefficient of Friction Coating

Product Details

Property	Average Result
Cure System	Platinum
Non Volatile Content	25 %
Appearance	Translucent
Cure	5 minutes / RTV
Mix Ratio	1:1
Solvent	Xylene

MED10-6671

Acetoxy

N/A

RTV, Low Coefficient of Friction Coating

Product Details

Property	Average Result
Cure System	Acetoxy
Appearance	Translucent
Cure	24 hours / RTV
Mix Ratio	1 Part
Comment	RTV, Low Coefficient of Friction Coating

MED11-6604

Acetoxy

250 cP

50 %

15 Type A

One Part, Smooth Finish

Product Details

Property	Average Result
Cure System	Acetoxy
Viscosity	250 cP (250 mPa*s)
Non Volatile Content	50 %
Durometer	15 Type A
Appearance	Translucent
Cure	24 hours / RTV
Elongation	375 %
Mix Ratio	1 PART
Solvent	THF
Specific Gravity	0.99
Tear	15 ppi (2.65 kN/m)
Tensile	75 psi (0.52 MPa)
Comment	One Part, Smooth Finish

MED16-6606

Acetoxy

95 cP

30 %

20 Type A

Silicone adhesive dispersed in heptane

Product Details

Property	Average Result
Cure Type	RTV
Mix Ratio	1 PART
Rheology	Flowable / Self Leveling
Appearance	Translucent
Cure	72 hours / RTV
Cure System	Acetoxy
Durometer	20 Type A
Elongation	800 %
Non Volatile Content	30 %
Solvent	Heptane
Substrate	Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate / Stainless steel
Tear	120 ppi (21.16 kN/m)
Tensile	1,200 psi (8.28 MPa)
Viscosity	95 cP (95 mPa*s)
Comment	Silicone adhesive dispersed in heptane

MED6-6606

Acetoxy

95 cP

30 %

20 Type A

Silicone adhesive dispersed in heptane

Product Details

Property	Average Result
Cure Type	RTV
Mix Ratio	1 PART
Rheology	Flowable / Self Leveling
Appearance	Translucent
Cure	3 days / RTV
Cure System	Acetoxy
Durometer	20 Type A
Elongation	800 %
Non Volatile Content	30 %
Specific Gravity	1.11
Substrate	Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate / Stainless steel
Tear	115 ppi (20.28 kN/m)
Tensile	1,190 psi (8.21 MPa)
Viscosity	95 cP (95 mPa*s)
Comment	Silicone adhesive dispersed in heptane

R-1008-0

Oxime

1,300 cP

70 %

23 Type A

N/A

Product Details

Property	Average Result
Viscosity	1,300 cP (1,300 mPa*s)
Non Volatile Content	70 %
Appearance	Translucent
Dielectric Strength	513 volts/mil (20.01 kV/mm)
Durometer	23 Type A
Elongation	223 %
Tack Free Time	50 minutes
Tensile	235 psi (1.62 MPa)
Thermal Conductivity	0.17 W/(mK)

R-1009

Oxime

6,150 cP

32 %

45 Type A

High strength coating recommend for coating PCBs and other electronic assemblies.

Product Details

Property	Average Result
Viscosity	6,150 cP (6,150 mPa*s)
Non Volatile Content	32 %
Appearance	Translucent
Tack Free Time	1.5 hours
Cure	7 days / RTV
Cure System	Oxime
Durometer	45 Type A
Elongation	650 %
Specific Gravity	1.1
Tear	95 ppi (16.75 kN/m)
Tensile	1,150 psi (7.93 MPa)
Comment	High strength coating recommend for coating PCBs and other electronic assemblies.

R-1077

N/A

3,400 cP

60 %

40 Type A

N/A

Product Details

Property	Average Result
Viscosity	3,400 cP (3,400 mPa*s)
Non Volatile Content	60 %
Appearance	Translucent
Tack Free Time	20 minutes
Cure	6 days / RTV
Durometer	40 Type A
Elongation	330 %
Tensile	745 psi (5.14 MPa)

R-1082

Acetoxy

700 cP

29 %

25 Type A

Great adhesion to a variety of substrates. Not recommended where corrosion is of concern.

Product Details

Property	Average Result
Viscosity	700 cP (700 mPa*s)
Non Volatile Content	29 %
Appearance	Translucent
Cure	5 days / RTV
Cure System	Acetoxy
Durometer	25 Type A
Elongation	950 %
Refractive Index	1.41
Specific Gravity	1.09
Stress at Strain	160 psi / 300 % (1.1 Mpa / 300 %)
Tear	125 ppi (22.05 kN/m)
Tensile	1,425 psi (9.83 MPa)
Comment	Great adhesion to a variety of substrates. Not recommended where corrosion is of concern.

R-1099

Condensation

6,600 cP

30 %

40 Type A

N/A

Product Details

Property	Average Result
Viscosity	6,600 cP (6,600 mPa*s)
Non Volatile Content	30 %
Appearance	Translucent
Tack Free Time	10 minutes
Cure	7 days / RTV
Cure System	Condensation
Dielectric Strength	635 volts/mil (24.77 kV/mm)
Durometer	40 Type A
Elongation	570 %
Mix Ratio	1 Part
Tensile	1,050 psi (7.24 MPa)

R-1182

Acetoxy

N/A

7 %

N/A

One Part and cures at room temperature. Acetic acid cure by-product therefore not recommended where corrosion is of concern.

Product Details

Property	Average Result
Non Volatile Content	7 %
Appearance	Translucent
Cure	RTV
Cure System	Acetoxy
Comment	One Part and cures at room temperature. Acetic acid cure by-product therefore not recommended where corrosion is of concern.

R-2180

Platinum

3,075 cP

20 %

40 Type A

High strength coating and primer is recommended to increase adhesion. Requires heat to cure.

Product Details

Property	Average Result
Viscosity	3,075 cP (3,075 mPa*s)
Non Volatile Content	20 %
Appearance	Translucent
Cure	45 minutes / 75 °C 135 minutes / 150 °C
Cure System	Platinum
Durometer	40 Type A
Elongation	1,050 %
Mix Ratio	1:1
Refractive Index	1.41
Stress at Strain	150 psi / 100 % (1.03 MPa / 100 %)
Tear	300 ppi (52.91 kN/m)
Tensile	1,700 psi (11.72 MPa)
Work Time	72 hours
Comment	High strength coating and primer is recommended to increase adhesion. Requires heat to cure.

R-2180-2

Platinum

3,275 cP

20 %

45 Type A

Cure: 30 M / 25 C : 45 M / 75 C : 135 M / 150 C, 20% Solids

Product Details

Property	Average Result
Viscosity	3,275 cP (3,275 mPa*s)
Non Volatile Content	20 %
Appearance	Translucent
Cure	30 minutes / RTV 45 minutes / 75 °C 135 minutes / 150 °C
Cure System	Platinum
Durometer	45 Type A
Elongation	1,000 %
Mix Ratio	1:1
Stress at Strain	140 psi / 100 % (0.97 MPa / 100 %)
Tear	300 ppi (52.91 kN/m)
Tensile	1,650 psi (11.38 MPa)
Comment	Cure: 30 M / 25 C : 45 M / 75 C : 135 M / 150 C, 20% Solids

R-2182

Platinum

24 cP

25 %

N/A

Requires minimum heat to cure. Acetic acid cure by-product therefore not recommended where corrosion is of concern.

Product Details

Property	Average Result
Viscosity	24 cP (24 mPa*s)
Non Volatile Content	25 %
Appearance	Translucent
Cure	5 minutes / RTV
Cure System	Platinum
Mix Ratio	1:1
Post Cure	5 minutes / 150 °C
Specific Gravity	0.96
Work Time	24 hours
Comment	Requires minimum heat to cure. Acetic acid cure by-product therefore not recommended where corrosion is of concern.

R-3930

Acetoxy

735 cP

60 %

30 Type A

100%M Fluoro, fuel and hydrocarbon solvent resistant high strength coating.

Product Details

Property	Average Result
Viscosity	735 cP (735 mPa*s)
Non Volatile Content	60 %
Appearance	Translucent
Cure	72 hours / RTV
Cure System	Acetoxy
Durometer	30 Type A
Elongation	400 %
Specific Gravity	1.36
Tear	40 ppi (7.05 kN/m)
Tensile	750 psi (5.17 MPa)
Comment	100%M Fluoro, fuel and hydrocarbon solvent resistant high strength coating.

R-3975

Acetoxy

1,625 cP

60 %

25 Type A

Dispersion Coating, 60% Solids

Product Details

Property	Average Result
Viscosity	1,625 cP (1,625 mPa*s)
Non Volatile Content	60 %
Appearance	Translucent
Cure	72 hours / RTV
Cure System	Acetoxy
Durometer	25 Type A
Elongation	400 %
Mix Ratio	1 PART
Specific Gravity	1.29
Tear	35 ppi (6.17 kN/m)
Tensile	425 psi (2.93 MPa)
Comment	Dispersion Coating, 60% Solids

R3-1075

Oxime

3,300 cP

60 %

40 Type A

Dispersion Coating / Conformal, 60% Solids

Product Details

Property	Average Result
Viscosity	3,300 cP (3,300 mPa*s)
Non Volatile Content	60 %
Appearance	Translucent
Tack Free Time	80 minutes
Cure	7 days / 25 °C
Cure System	Oxime
Dielectric Strength	1,250 volts/mil (48.75 kV/mm)
Durometer	40 Type A
Elongation	350 %
Mix Ratio	1 PART
Operating Temperature	-65 °C / 240 °C
Solvent	Xylene
Specific Gravity	1.06
Tear	40 ppi (7.05 kN/m)
Tensile	700 psi (4.83 MPa)
Comment	Dispersion Coating / Conformal, 60% Solids

Elastomer Gels

Product

INCI Name

D4 Content

Viscosity

Appearance

Data Sheet

Comment

CXG-1101

Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer

<0.05 %

550,000 cP

Clear

12% Solids Elastomer Gel Dispersed in D5

Product Details

Property	Average Result
INCI Name	Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer
D4 Content	<0.05 %
Viscosity	550,000 cP (550,000 mPa*s)
Appearance	Clear
Non Volatile Content	12 %
Refractive Index	1.40
Specific Gravity	0.96
Comment	12% Solids Elastomer Gel Dispersed in D5

CXG-1103

Cyclopentasiloxane (and) Cyclohexasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer

<0.05 %

60,000 cP

Clear

8% Solids Elastomer Gel Dispersed in D5 and D6

Product Details

Property	Average Result
INCI Name	Cyclopentasiloxane (and) Cyclohexasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer
D4 Content	<0.05 %
Viscosity	60,000 cP (60,000 mPa*s)
Appearance	Clear
Non Volatile Content	8 %
Refractive Index	1.40
Specific Gravity	0.96
Comment	8% Solids Elastomer Gel Dispersed in D5 and D6

CXG-1104

Dimethicone (and) Dimethicone/Vinyl Dimethicone Crosspolymer

<0.05 %

635,000 cP

Clear

12% Solids Elastomer Gel Dispersed in Low Viscosity Dimethicone Fluid

Product Details

Property	Average Result
INCI Name	Dimethicone (and) Dimethicone/Vinyl Dimethicone Crosspolymer
D4 Content	<0.05 %
Viscosity	635,000 cP (635,000 mPa*s)
Appearance	Clear
Refractive Index	1.40
Specific Gravity	0.92
Comment	12% Solids Elastomer Gel Dispersed in Low Viscosity Dimethicone Fluid

Electrically Conductive/Static Dissipative

Product

Volume Resistivity

Viscosity

Cure System

Durometer

Tensile

Data Sheet

Comment

CV-1500

3 ohmcm

N/A

Oxime

80 Type A

650 psi

Carbon filled, 3 ohmcm, versatile adhesive. Tack Free in 10 minutes.

Product Details

Property	Average Result
Volume Resistivity	3 ohmcm
Cure System	Oxime
Durometer	80 Type A
Tensile	650 psi (4.48 MPa)
Appearance	Black
Cure	7 days / RTV
Elongation	20 %
Flow Rate	0 in
Lap Shear	325 psi (2.24 MPa)
Specific Gravity	1.25
Tack Free Time	10 minutes
Comment	Carbon filled, 3 ohmcm, versatile adhesive. Tack Free in 10 minutes.

CV-2640

2.5 ohmcm

N/A

Platinum

75 Type A

475 psi

2.5 ohmcm, *4) Primed Lap Shear 250 psi (1.7 MPa), Carbon Fiber Filled

Product Details

Property	Average Result
Volume Resistivity	2.5 ohmcm
Cure System	Platinum
Durometer	75 Type A
Tensile	475 psi (3.28 MPa)
Appearance	Black
Cure	30 minutes / 150 °C
Elongation	90 %
Lap Shear	250 psi (1.72 MPa)
Mix Ratio	10:1
Specific Gravity	1.19
Work Time	2 hours
Comment	2.5 ohmcm, *4) Primed Lap Shear 250 psi (1.7 MPa), Carbon Fiber Filled

CV-2644

0.01 ohmcm

224,500 cP

Platinum

85 Type A

525 psi

0.005 ohmcm, *22) 1.2 W/mK

Product Details

Property	Average Result
Volume Resistivity	0.01 ohmcm
Viscosity	224,500 cP (224,500 mPa*s)
Cure System	Platinum
Durometer	85 Type A
Tensile	525 psi (3.62 MPa)
Appearance	Tan
Cure	30 minutes / 150 °C
Elongation	86 %
Mix Ratio	20:1
Specific Gravity	3.39
Thermal Conductivity	1.2 W/(mK)
Work Time	2.75 hours
Comment	0.005 ohmcm, *22) 1.2 W/mK

CV-2646

0.01 ohmcm

N/A

Alkoxy

80 Type A

400 psi

Electrically Conductive, 0.007 ohmcm

Product Details

Property	Average Result
Volume Resistivity	0.01 ohmcm
Cure System	Alkoxy
Durometer	80 Type A
Tensile	400 psi (2.76 MPa)
Appearance	Tan
Cure	10 days / RTV
Elongation	90 %
Lap Shear	325 psi (2.24 MPa)
Mix Ratio	100:0.5
Specific Gravity	3.86
Tear	60 ppi (10.58 kN/m)
Thermal Conductivity	1 W/(mK)
Work Time	3.5 hours
Comment	Electrically Conductive, 0.007 ohmcm

CV1-2640

25 ohmcm

N/A

Platinum

40 Type A

525 psi

Carbon filled.

Product Details

Property	Average Result
Volume Resistivity	25 ohmcm
Cure System	Platinum
Durometer	40 Type A
Tensile	525 psi (3.62 MPa)
Appearance	Black
Cure	2 hours / 65 °C
Elongation	225 %
Extrusion Rate	300 g/minute
Mix Ratio	10:1
Specific Gravity	1.07
Comment	Carbon filled.

CV1-2646

0.01 ohmcm

N/A

Alkoxy

80 Type A

400 psi

0.005 ohmcm

Product Details

Property	Average Result
Volume Resistivity	0.01 ohmcm
Cure System	Alkoxy
Durometer	80 Type A
Tensile	400 psi (2.76 MPa)
Appearance	Tan
Cure	10 days / RTV
Elongation	90 %
Lap Shear	325 psi (2.24 MPa)
Mix Ratio	100:0.5
Specific Gravity	3.86
Tear	60 ppi (10.58 kN/m)
Thermal Conductivity	1 W/(mK)
Work Time	3.5 hours
Comment	0.005 ohmcm

CV2-1148

9,000,000,000 ohmcm

N/A

Oxime

45 Type A

N/A

100% Solids

Product Details

Property	Average Result
Volume Resistivity	9,000,000,000 ohmcm
Cure System	Oxime
Durometer	45 Type A
Appearance	Black
Cure	7 days / RTV
Mix Ratio	1 PART
Specific Gravity	1.07
Comment	100% Solids

CV2-2640

1 ohmcm

675,000 cP

Platinum

30 Type A

500 psi

Carbon Black Filled

Product Details

Property	Average Result
Volume Resistivity	1 ohmcm
Viscosity	675,000 cP (675,000 mPa*s)
Cure System	Platinum
Durometer	30 Type A
Tensile	500 psi (3.45 MPa)
Appearance	Black
Cure	24 hours / RTV
Elongation	350 %
Mix Ratio	1:1
Specific Gravity	1.06
Tear	30 ppi (5.29 kN/m)
Thermal Conductivity	0.22 W/(mK)
Work Time	1 hours
Comment	Carbon Black Filled

CV2-2644

0 ohmcm

N/A

Platinum

85 Type A

500 psi

0.004 ohmcm

Product Details

Property	Average Result
Volume Resistivity	0 ohmcm
Cure System	Platinum
Durometer	85 Type A
Tensile	500 psi (3.45 MPa)
Appearance	Tan
Cure	30 minutes / 150 °C
Elongation	100 %
Mix Ratio	20:1
Specific Gravity	3.04
Work Time	2.5 hours
Comment	0.004 ohmcm

CV3-2640

2,200,000 ohmcm

14,100 cP

Platinum

25 Type A

70 psi

Carbon filled. Designed for broad operating temperature.

Product Details

Property	Average Result
Volume Resistivity	2,200,000 ohmcm
Viscosity	14,100 cP (14,100 mPa*s)
Cure System	Platinum
Durometer	25 Type A
Tensile	70 psi (0.48 MPa)
Appearance	Black
Cure	7 days / RTV
Elongation	120 %
Lap Shear	50 psi (0.34 MPa)
Mix Ratio	1:1
Specific Gravity	1.01
Tack Free Time	10 hours
Comment	Carbon filled. Designed for broad operating temperature.

R-1505

8 ohmcm

N/A

Oxime

75 Type A

525 psi

8 ohmcm. Static Dissipation

Product Details

Property	Average Result
Volume Resistivity	8 ohmcm
Cure System	Oxime
Durometer	75 Type A
Tensile	525 psi (3.62 MPa)
Appearance	Black
Cure	7 days / 25 °C
Dielectric Strength	10 volts/mil (0.39 kV/mm)
Elongation	25 %
Flow Rate	0.1 in (2.54 mm)
Lap Shear	290 psi (2 MPa)
Mix Ratio	1 PART
Non Volatile Content	100 %
Specific Gravity	1.23
Tack Free Time	10 minutes
Thermal Conductivity	0.3 W/(mK)
Comment	8 ohmcm. Static Dissipation

R-2631

70 ohmcm

N/A

Platinum

45 Type A

615 psi

Carbon filled.

Product Details

Property	Average Result
Volume Resistivity	70 ohmcm
Cure System	Platinum
Durometer	45 Type A
Tensile	615 psi (4.24 MPa)
Appearance	Black
Cure	30 minutes / 150 °C
Elongation	275 %
Extrusion Rate	100 g/minute
Mix Ratio	1:1
Specific Gravity	1.08
Tear	55 ppi (9.7 kN/m)
Comment	Carbon filled.

R-2637

0.01 ohmcm

N/A

Platinum

60 Type A

210 psi

Electrically Conductive RTV Silicone. Mixes to smooth paste, can be screen printed.

Product Details

Property	Average Result
Volume Resistivity	0.01 ohmcm
Cure System	Platinum
Durometer	60 Type A
Tensile	210 psi (1.45 MPa)
Appearance	Tan
Cure	30 minutes / 150 °C
Dielectric Strength	5 volts/mil (0.2 kV/mm)
Elongation	275 %
Mix Ratio	20:1
Specific Gravity	3.6
Tack Free Time	5 hours
Thermal Conductivity	1.5 W/(mK)
Work Time	4 hours
Comment	Electrically Conductive RTV Silicone. Mixes to smooth paste, can be screen printed.

SCV-2596

2.5 ohmcm

N/A

Platinum

75 Type A

475 psi

Electrically Conductive, 2.5 ohmcm, Carbon Fiber Filled

Product Details

Property	Average Result
Volume Resistivity	2.5 ohmcm
Cure System	Platinum
Durometer	75 Type A
Tensile	475 psi (3.28 MPa)
Appearance	Black
Cure	30 minutes / 150 °C
Elongation	90 %
Lap Shear	250 psi (1.72 MPa)
Lap Shear	250 psi (1.72 MPa)
Mix Ratio	10:1
Specific Gravity	1.19
Work Time	2 hours

SCV1-2596

0.01 ohmcm

N/A

Platinum

85 Type A

450 psi

Electricaly Conductive, 0.005 ohmcm ,*21, 22) 1.2 W /mK

Product Details

Property	Average Result
Volume Resistivity	0.01 ohmcm
Cure System	Platinum
Durometer	85 Type A
Tensile	450 psi (3.1 MPa)
Appearance	Tan
Cure	30 minutes / 150 °C
Mix Ratio	20:1
Specific Gravity	3.42
Thermal Conductivity	1.2 W/(mK)
Work Time	2.5 hours
Comment	Electricaly Conductive, 0.005 ohmcm ,*21, 22) 1.2 W /mK

Encapsulation Technology

Product

INCI Name

D4 Content

Viscosity

Appearance

Data Sheet

Comment

CES-1104

Dimethicone and Aqua and Glycerin and Pentylene Glycol and Dimethicone/Vinyl Dimethicone Crosspolymer and Phenoxyethanol and Carbomer and Amodimethicone and Sodium Hydroxide and Disodium EDTA

<0.05 %

60,000 cP

Translucent

Encapsulated Silicone with 12% CXG-1104

Product Details

Property	Average Result
D4 Content	<0.05 %
Viscosity	60,000 cP (60,000 mPa*s)
Appearance	Translucent
Refractive Index	1.40
Specific Gravity	1.03
Comment	Encapsulated Silicone with 12% CXG-1104

Fluids

Product

Substrate

Volatile Content

Viscosity

Data Sheet

Comment

FS-3602

Silicone

0.1 %

N/A

Product Details

Property	Average Result
Volatile Content	0.1 %
Appearance	Translucent
Refractive Index	1.39

MED-360

Glass / Metal / Plastic

0.1 %

100 cP / 350 cP / 1,000 cP / 12,500 cP

Dimethyl Polymer

Product Details

Property	Average Result
Volatile Content	0.1 %
Viscosity	100 cP / 350 cP / 1,000 cP / 12,500 cP (100 mPas / 350 mPas / 1,000 mPas / 12,500 mPas)
Appearance	Translucent
Mix Ratio	1 PART
Refractive Index	1.40
Specific Gravity	0.97
Substrate	Glass / Metal / Plastic
Comment	Dimethyl Polymer

MED-361

Glass / Metal / Plastic

0.1 %

100 cP / 350 cP / 1,000 cP / 12,500 cP

Dimethyl Polymer

Product Details

Property	Average Result
Volatile Content	0.1 %
Viscosity	100 cP / 350 cP / 1,000 cP / 12,500 cP (100 mPas / 350 mPas / 1,000 mPas / 12,500 mPas)
Appearance	Clear
Substrate	Glass / Metal / Plastic
Comment	Dimethyl Polymer

MED-366

N/A

0.1 %

1,000 cP

Highly purified Dimethyl Polymer

Product Details

Property	Average Result
Volatile Content	0.1 %
Viscosity	1,000 cP (1,000 mPa*s)
Appearance	Clear
Cure System	Non-Curing
Mix Ratio	1 Part
Refractive Index	1.40
Specific Gravity	0.97
Comment	Highly purified Dimethyl Polymer

MED-367

N/A

0.1 %

5,000 cP

Highly purified Dimethyl Polymer

Product Details

Property	Average Result
Volatile Content	0.1 %
Viscosity	5,000 cP (5,000 mPa*s)
Appearance	Translucent
Cure System	Non-Curing
Mix Ratio	1 Part
Refractive Index	1.40
Specific Gravity	0.97
Comment	Highly purified Dimethyl Polymer

MED-400

Silicone

0.3 %

350 cP / 1,000 cP / 12,500 cP

Fluorosilicone Polymer

Product Details

Property	Average Result
Volatile Content	0.3 %
Viscosity	350 cP / 1,000 cP / 12,500 cP (350 mPas / 1,000 mPas / 12,500 mPa*s)
Substrate	Silicone
Comment	Fluorosilicone Polymer

MED-420

Silicone

0.1 %

350 cP / 1,000 cP / 12,500 cP

Methyl Fluoro Copolymer (Low Fluoro Content)

Product Details

Property	Average Result
Volatile Content	0.1 %
Viscosity	350 cP / 1,000 cP / 12,500 cP (350 mPas / 1,000 mPas / 12,500 mPa*s)
Substrate	Silicone
Comment	Methyl Fluoro Copolymer (Low Fluoro Content)

MED-460

Silicone

0.1 %

350 cP / 1,000 cP / 12,500 cP

Methyl Fluoro Copolymer (High Fluoro Content)

Product Details

Property	Average Result
Volatile Content	0.1 %
Viscosity	350 cP / 1,000 cP / 12,500 cP (350 mPas / 1,000 mPas / 12,500 mPa*s)
Substrate	Silicone
Comment	Methyl Fluoro Copolymer (High Fluoro Content)

PLY-7602

N/A

A processing aid or plasticizer for elastomeric systems

Product Details

Property	Average Result
Appearance	Clear
Cure System	Non-Curing
Mix Ratio	1 PART
Non Volatile Content	52%
Rheology	Flowable / Self Leveling
Special Feature	Phenyl processing aid
Comment	A processing aid or plasticizer for elastomeric systems

PLY-7700

N/A

48 %

6 cSt

Low viscosity fluid

Product Details

Property	Average Result
Volatile Content	48 %
Viscosity	6 cSt
Appearance	Clear
Cure System	Non-Curing
Mix Ratio	1 PART
Rheology	Flowable / Self Leveling
Special Feature	Ethoxy functional
Specific Gravity	0.95
Comment	Low viscosity fluid

S-7200

Glass / Metal / Plastic

2 %

7,000,000 cP

100% Dimethylsiloxane non-reactive polymer. Custom viscosities available.

Product Details

Property	Average Result
Viscosity	7,000,000 cP (7,000,000 mPa*s)
Volatile Content	2 %
Specific Gravity	1
Appearance	Clear
Dielectric Strength	400 volts/mil (15.6 kV/mm)
Operating Temperature	-40 °C / 200 °C
Refractive Index	1.40
Volume Resistivity	1,000,000,000,000,000 ohmcm
Comment	100% Dimethylsiloxane non-reactive polymer. Custom viscosities available.

S-7400

Glass / Metal / Plastic

4 %

60,000 cP

Recommend for extreme temperature (-100°C to 250°C). Higher and custom viscosities available.

Product Details

Property	Average Result
Substrate	Glass / Metal / Plastic
Volatile Content	4 %
Viscosity	60,000 cP
Appearance	Translucent
Dielectric Strength	400 volts/mil (15.6 kV/mm)
Operating Temperature	-65 °C / 260 °C
Refractive Index	1.43
Specific Gravity	1.1
Volume Resistivity	1,000,000,000,000,000 ohmcm

Foams

Product

Foam Density

Viscosity

Cure System

Application Life

Appearance

Data Sheet

Comment

CF1-3710-2

50 lbs/ft3

N/A

Platinum

N/A

Gray

Cure in place fuel resistant foam for short term fuel exposure, application life 10 minutes

Product Details

Property	Average Result
Cure System	Platinum
Foam Density	50 lbs/ft3 (0.8 g/cm3)
Appearance	Gray
Cure	1 minutes / RTV
Extrusion Rate	1 g/minute
Mix Ratio	1:1
Operating Temperature	-65 °C / 240 °C
Tack Free Time	10 minutes
Comment	Cure in place fuel resistant foam for short term fuel exposure, application life 10 minutes

CF3-2350

25 lbs/ft³

90,000 cP

Platinum

N/A

Gray

Useful where stability at higher and lower temperatures is required.

Product Details

Property	Average Result
Foam Density	25 lbs/ft³ (0.4 g/cm³)
Viscosity	90,000 cP (90,000 mPa*s)
Cure System	Platinum
Appearance	Gray
Cure	45 minutes / 100 °C
Cure Type	RTV
Mix Ratio	1:1
Rheology	Flowable / Self Leveling
Specific Gravity	1.1

CV-2391

20 lbs/ft3

3,000 cP

Platinum

6 minutes

White

Cure in place versatile low outgassing foam, application life 6 minutes

Product Details

Property	Average Result
Viscosity	3,000 cP (3,000 mPa*s)
Cure System	Platinum
Foam Density	20 lbs/ft3 (0.32 g/cm3)
Application Life	6 minutes
Appearance	White
Cure	60 minutes / RTV
Mix Ratio	1:10
Comment	Cure in place versatile low outgassing foam, application life 6 minutes

MED-2310

N/A

40,000 cP

Platinum

2 minutes

White

Low Density

Product Details

Property	Average Result
Viscosity	40,000 cP (40,000 mPa*s)
Cure System	Platinum
Application Life	2 minutes
Appearance	White
Mix Ratio	1:1
Comment	Low Density

MED10-2310

N/A

40,000 cP

Platinum

2 minutes

White

Low Density

Product Details

Property	Average Result
Viscosity	40,000 cP (40,000 mPa*s)
Cure System	Platinum
Application Life	2 minutes
Appearance	White
Mix Ratio	1:1
Comment	Low Density

R-2360

12 lbs/ft3

40,000 cP

Platinum

2 minutes

White

Flexible cure in place low density foam. Application life 2 minutes.

Product Details

Property	Average Result
Viscosity	40,000 cP (40,000 mPa*s)
Cure System	Platinum
Foam Density	12 lbs/ft3 (0.19 g/cm3)
Application Life	2 minutes
Appearance	White
Cure	20 minutes / RTV
Mix Ratio	1:1
Comment	Flexible cure in place low density foam. Application life 2 minutes.

R-2370

10 lbs/ft3

4,700 cP

Tin

28 minutes

Tan

Low Density / Soft, 10 lb/ft^3 (0.16 g/cm^3)

Product Details

Property	Average Result
Viscosity	4,700 cP (4,700 mPa*s)
Cure System	Tin
Foam Density	10 lbs/ft3 (0.16 g/cm3)
Application Life	28 minutes
Appearance	Tan
Cure	10 minutes / RTV
Mix Ratio	100:6
Non Volatile Content	100 %
Comment	Low Density / Soft, 10 lb/ft^3 (0.16 g/cm^3)

SFM5-2350

25 lbs/ft3

52,500 cP

Platinum

N/A

Black

Cure in place versatile tough foam. Application life 6 minutes.

Product Details

Property	Average Result
Viscosity	52,500 cP (52,500 mPa*s)
Cure System	Platinum
Foam Density	25 lbs/ft3 (0.4 g/cm3)
Appearance	Black
Cure	33 minutes / 100 °C
Dielectric Strength	190 volts/mil (7.41 kV/mm)
Mix Ratio	1:1
Specific Gravity	1.1
Volume Resistivity	2,200,000,000,000,000 ohmcm
Work Time	23 minutes
Comment	Cure in place versatile tough foam. Application life 6 minutes.

Gels

Product

Viscosity

Penetration

Work Time

Mix Ratio

Data Sheet

Comment

CV-8151

2,500 cP

4 mm

30 hours

1:1

Low Viscosity, Penetration 4.0 mm

Product Details

Property	Average Result
Viscosity	2,500 cP (2,500 mPa*s)
Penetration	4 mm
Work Time	30 hours
Appearance	Clear
Cure	30 minutes / 150 °C
Cure System	Platinum
Mix Ratio	1:1
Comment	Low Viscosity, Penetration 4.0 mm

CV-8251

1,800 cP

3 mm

24 hours

1:1

Low/High Temperature, Penetration 3 mm

Product Details

Property	Average Result
Viscosity	1,800 cP (1,800 mPa*s)
Penetration	3 mm
Work Time	24 hours
Appearance	Clear
Cure	40 minutes / 150 °C
Cure System	Platinum
Mix Ratio	1:1
Comment	Low/High Temperature, Penetration 3 mm

EPM-2480

2,500 cP

4 mm

30 hours

1:1

Soft High Tack Gel

Product Details

Property	Average Result
Viscosity	2,500 cP (2,500 mPa*s)
Penetration	4 mm
Work Time	30 hours
Appearance	Clear
Cure	30 minutes / 150 °C
Cure System	Platinum
Ionic Content Cl	<5 ppm
Ionic Content K	<1 ppm
Ionic Content Na	<2 ppm
Mix Ratio	1:1
Volume Resistivity	100,000,000,000,000 ohmcm
Comment	Soft High Tack Gel

EPM-2482

1,800 cP

3 mm

N/A

1:1

Soft High Tack Gel;For applications requiring low volatility. Useful for potting intricate assemblies due to a low viscosity. As a low modulus embedding or potting compound for environmental protection of electronic assemblies and components

Product Details

Property	Average Result
Viscosity	1,800 cP (1,800 mPa*s)
Penetration	3 mm
Appearance	Clear
Cure	40 minutes / 150 °C
Cure System	Platinum
Ionic Content Cl	<5 ppm
Ionic Content K	<1 ppm
Ionic Content Na	<4 ppm
Mix Ratio	1:1
Volatile Content	0.3 %
Comment	Soft High Tack Gel;For applications requiring low volatility. Useful for potting intricate assemblies due to a low viscosity. As a low modulus embedding or potting compound for environmental protection of electronic assemblies and components

GEL-3500

11,250 cP

N/A

12 hours

1:1

Firm Fluoro Gel;Recommended for short term exposure to fuels and solvent

Product Details

Property	Average Result
Viscosity	11,250 cP (11,250 mPa*s)
Work Time	12 hours
Appearance	Translucent
Cure	45 minutes / 150 °C
Cure System	Platinum
Durometer	50 Type 00
Mix Ratio	1:1
Operating Temperature	-65 °C / 220 °C
Comment	Firm Fluoro Gel;Recommended for short term exposure to fuels and solvent

GEL-8100

535 cP

N/A

1:1

N/A

Product Details

Property	Average Result
Viscosity	535 cP (535 mPa*s)
Appearance	Clear
Cure	1 hours / 100 °C
Mix Ratio	1:1
Specific Gravity	0.98

GEL-8111

535 cP

N/A

1:1

For applications requiring a low viscosity and low volatility soft gel

Product Details

Property	Average Result
Appearance	Clear
Cure	1 hour / 100°C
Cure System	Platinum
Cure Type	Heat Cure
Mix Ratio	1:1
Refractive Index	1.40
Rheology	Flowable / Self Leveling
Viscosity	535 cP (535 mPa*s)
Volatile Content	0.09 %

GEL-8127

530 cP

8 mm

N/A

Product Details

Property	Average Result
Viscosity	530 cP (530 mPa*s)
Penetration	8 mm
Appearance	Translucent
Cure	35 minutes / 150 °C

GEL-8136

450 cP

14 mm

N/A

Product Details

Property	Average Result
Viscosity	450 cP (450 mPa*s)
Penetration	14 mm
Appearance	Clear
Cure	60 minutes / 140 °C

GEL-8150

500 cP

5 mm

4 hours

1:1

Soft High Tack Gel

Product Details

Property	Average Result
Viscosity	500 cP (500 mPa*s)
Penetration	5 mm
Work Time	4 hours
Appearance	Translucent
Cure	30 minutes / 100 °C
Cure System	Platinum
Dielectric Strength	500 volts/mil (19.5 kV/mm)
Mix Ratio	1:1
Operating Temperature	-65 °C / 200 °C
Refractive Index	1.40
Specific Gravity	0.97
Volatile Content	1 %
Volume Resistivity	1,000,000,000,000,000 ohmcm
Comment	Soft High Tack Gel

GEL-8170

600 cP

9 mm

N/A

1:1

Very Soft High Tack Gel;Max viscosity after 6 hrs is 2,000 cP

Product Details

Property	Average Result
Viscosity	600 cP (600 mPa*s)
Penetration	9 mm
Appearance	Translucent
Cure	90 minutes / 80 °C
Cure System	Platinum
Dielectric Strength	500 volts/mil (19.5 kV/mm)
Mix Ratio	1:1
Operating Temperature	-65 °C / 200 °C
Volume Resistivity	1,000,000,000,000,000 ohmcm
Comment	Very Soft High Tack Gel;Max viscosity after 6 hrs is 2,000 cP

GEL-8250

650 cP

5 mm

2 hours

1:1

Soft Med Tack Gel;For applications requiring a broader operating temperature range.

Product Details

Property	Average Result
Viscosity	650 cP (650 mPa*s)
Penetration	5 mm
Work Time	2 hours
Appearance	Translucent
Cure	30 minutes / 100 °C
Cure System	Platinum
Dielectric Strength	500 volts/mil (19.5 kV/mm)
Mix Ratio	1:1
Operating Temperature	-115 °C / 265 °C
Refractive Index	1.43
Specific Gravity	1
Volume Resistivity	1,000,000,000,000,000 ohmcm
Comment	Soft Med Tack Gel;For applications requiring a broader operating temperature range.

GEL1-8155

14,500 cP

0.4 mm

N/A

1:1

Soft Low Tack Gel;Viscosity increases ~ 1.5X in 24 hrs (¼” diameter foot, 1.5 seconds)

Product Details

Property	Average Result
Viscosity	14,500 cP (14,500 mPa*s)
Penetration	0.4 mm
Appearance	Translucent
Cure	30 minutes / 150 °C
Cure System	Platinum
Mix Ratio	1:1
Non Volatile Content	100 %
Operating Temperature	-65 °C / 200 °C
Refractive Index	1.40
Comment	Soft Low Tack Gel;Viscosity increases ~ 1.5X in 24 hrs (¼” diameter foot, 1.5 seconds)

GEL8-8150

500 cP

4 mm

1.5 hours

1:1

Soft High Tack Gel

Product Details

Property	Average Result
Viscosity	500 cP (500 mPa*s)
Penetration	4 mm
Work Time	1.5 hours
Appearance	Clear
Cure	30 minutes / 100 °C
Cure System	Platinum
Mix Ratio	1:1
Refractive Index	1.40
Specific Gravity	0.97
Comment	Soft High Tack Gel

LS-3238

1,500 cP

N/A

11 hours

1:1

Resistant to hydrocarbon solvents. Index matches Magnesium Fluoride. Potlife based on 3,000 cPs maximum mixed viscosity after 6hrs

Product Details

Property	Average Result
Viscosity	1,500 cP (1,500 mPa*s)
Work Time	11 hours
Appearance	Clear
Cure	30 minutes / 150 °C
Cure System	Platinum
Durometer	15 Type 00
Mix Ratio	1:1
Operating Temperature	-40 °C / 200 °C
Refractive Index	1.38
Specific Gravity	1.28
Volatile Content	0.14 %
Comment	Resistant to hydrocarbon solvents. Index matches Magnesium Fluoride. Potlife based on 3,000 cPs maximum mixed viscosity after 6hrs

LS-3441

14,500 cP

0.4 mm

N/A

1:1

Soft Low Tack Gel; Tough gel and 24 hr minimum potlife based on 2X initial viscosity

Product Details

Property	Average Result
Viscosity	14,500 cP (14,500 mPa*s)
Penetration	0.4 mm
Appearance	Clear
Cure	30 minutes / 150 °C
Cure System	Platinum
Mix Ratio	1:1
Operating Temperature	-65 °C / 200 °C
Refractive Index	1.41
Comment	Soft Low Tack Gel; Tough gel and 24 hr minimum potlife based on 2X initial viscosity

LS-3443

650 cP

5 mm

N/A

1:1

Soft High Tack Gel;Recommended as an optically robust alter-te to index match to 1.46 substrates;will LTV , 2hr minimum potlife based on 2X initial viscosity

Product Details

Property	Average Result
Viscosity	650 cP (650 mPa*s)
Penetration	5 mm
Appearance	Translucent
Cure	30 minutes / 100 °C
Cure System	Platinum
Dielectric Strength	500 volts/mil (19.5 kV/mm)
Mix Ratio	1:1
Operating Temperature	-115 °C / 265 °C
Refractive Index	1.43
Specific Gravity	1
Volatile Content	0.35 %
Volume Resistivity	1,000,000,000,000,000 ohmcm
Comment	Soft High Tack Gel;Recommended as an optically robust alter-te to index match to 1.46 substrates;will LTV , 2hr minimum potlife based on 2X initial viscosity

LS1-3252

360 cP

N/A

1.52 Refractive Index firm gel for encapsulating LEDs, and to reduce lightloss for other optical applications.

Product Details

Property	Average Result
Viscosity	360 cP (360 mPa*s)
Appearance	Clear
Cure	30 minutes / 150 °C
Durometer	25 Type 00
Refractive Index	1.52
Specific Gravity	1.07
Comment	1.52 Refractive Index firm gel for encapsulating LEDs, and to reduce lightloss for other optical applications.

LS1-3443

2,500 cP

6 mm

N/A

Product Details

Property	Average Result
Viscosity	2,500 cP (2,500 mPa*s)
Penetration	6 mm
Appearance	Clear
Specific Gravity	1

LS3-3354

5,200 cP

N/A

80 minutes

1:1

Soft Gel;Excellent for phosphor coatings.

Product Details

Property	Average Result
Viscosity	5,200 cP (5,200 mPa*s)
Work Time	80 minutes
Appearance	Clear
Cure	1 minutes / 70 °C
Cure System	Platinum
Durometer	60 Type 000
Mix Ratio	1:1
Operating Temperature	-40 °C / 200 °C
Refractive Index	1.54
Comment	Soft Gel;Excellent for phosphor coatings.

MED-6311

500 cP

2.6 mm

N/A

1:1

Low penetration, high strength gel

Product Details

Property	Average Result
Penetration	2.6 mm
Viscosity	500 cP (500 mPa*s)
Mix Ratio	1:1
Appearance	Clear
Cure	3.5 hours / 160 °C
Specific Gravity	0.97
Volatile Content	0.1 %
Comment	Low penetration, high strength gel

MED1-6300

1,000 cP

5 mm

N/A

1:1

Medium penetration, soft responsive gel

Product Details

Property	Average Result
Penetration	5 mm
Viscosity	1,000 cP (1,000 mPa*s)
Mix Ratio	1:1
Appearance	Translucent
Cure	5 hours / 140 °C
Cure System	Platinum
Non Volatile Content	99.9 %
Specific Gravity	0.98
Volatile Content	0.1 %
Comment	Medium penetration, soft responsive gel

MED2-6300

1,000 cP

10 mm

N/A

1:1

Low penetration, firm cohesive gel

Product Details

Property	Average Result
Penetration	10 mm
Viscosity	1,000 cP (1,000 mPa*s)
Mix Ratio	1:1
Appearance	Translucent
Cure	5 hours / 140 °C
Cure System	Platinum
Non Volatile Content	99.9 %
Refractive Index	1.40
Specific Gravity	0.97
Volatile Content	0.1 %
Comment	Low penetration, firm cohesive gel

MED3-6300

1,000 cP

15 mm

N/A

3:1

High penetration, soft responsive gel

Product Details

Property	Average Result
Penetration	15 mm
Viscosity	1,000 cP (1,000 mPa*s)
Mix Ratio	3:1
Appearance	Translucent
Cure	5 hours / 140 °C
Cure System	Platinum
Specific Gravity	0.97
Volatile Content	0.1 %
Comment	High penetration, soft responsive gel

MED3-6311

500 cP

2.6 mm

N/A

3:1

High Purity, Low Penetration, High Strength Gel

Product Details

Property	Average Result
Penetration	2.6 mm
Viscosity	500 cP (500 mPa*s)
Mix Ratio	3:1
Appearance	Translucent
Cure	3.5 hours / 160 °C
Cure System	Platinum
Non Volatile Content	99.9 %
Specific Gravity	0.97
Volatile Content	0.1 %
Comment	High Purity, Low Penetration, High Strength Gel

Greases

Product

Substrate

Volatile Content

Viscosity

Data Sheet

Comment

CV-9042

Glass / Metal / Plastic

N/A

Thermally Conductive

Product Details

Property	Average Result
Specific Gravity	1.61
Appearance	White
Comment	Thermally Conductive

CV-9052

Glass / Metal / Plastic

N/A

Volume Resistivity 1x1015 ohmcm, Thermally conductive

Product Details

Property	Average Result
Specific Gravity	1.1
Appearance	Gray
Volume Resistivity	1,000,000,000,000,000 ohmcm
Comment	Volume Resistivity 1x1015 ohmcm, Thermally conductive

CV-9341

Glass / Metal / Plastic

N/A

Thermally Conductive

Product Details

Property	Average Result
Specific Gravity	2.3
Thermal Conductivity	0.7 W/(mK)
Appearance	White
Comment	Thermally Conductive

G-9010

Glass / Metal / Plastic

0.34 %

1,100,000 cP

A stiff methyl silicone/Teflon grease for high vacuum and pressure systems.

Product Details

Property	Average Result
Viscosity	1,100,000 cP (1,100,000 mPa*s)
Specific Gravity	1.14
Volatile Content	0.34 %
Appearance	Gray
Flow Rate	2.7 in (68.58 mm)
Operating Temperature	-40 °C / 230 °C
Comment	A stiff methyl silicone/Teflon grease for high vacuum and pressure systems.

G-9020

Glass / Metal / Plastic

0.3 %

310,000 cP

A medium consistency methyl silicone grease for high vacuum and pressure systems.

Product Details

Property	Average Result
Viscosity	310,000 cP (310,000 mPa*s)
Specific Gravity	1.08
Volatile Content	0.3 %
Appearance	Translucent
Operating Temperature	-40 °C / 230 °C
Comment	A medium consistency methyl silicone grease for high vacuum and pressure systems.

G-9030

Glass / Metal / Plastic

0.3 %

980,100 cP

A stiff methyl grease used lubricating . 0.3% Weight loss. For high vacuum and pressure systems.

Product Details

Property	Average Result
Viscosity	980,100 cP (980,100 mPa*s)
Specific Gravity	1.11
Volatile Content	0.3 %
Appearance	Gray
Extrusion Rate	53 g/minute
Operating Temperature	-40 °C / 230 °C
Comment	A stiff methyl grease used lubricating . 0.3% Weight loss. For high vacuum and pressure systems.

LS-1246

Glass / Metal / Plastic

N/A

Product Details

Property	Average Result
Specific Gravity	1.1
Appearance	Clear
Refractive Index	1.46

MED-6731

Silicone

0.6 %

2,000,000 cP

High Consistency Methyl Fluoro Grease

Product Details

Property	Average Result
Volatile Content	0.6 %
Viscosity	2,000,000 cP (2,000,000 mPa*s)
Substrate	Silicone
Comment	High Consistency Methyl Fluoro Grease

MED-9011

Glass / Metal / Plastic

0.3 %

95,000 cP

Low Consistency Grease

Product Details

Property	Average Result
Volatile Content	0.3 %
Viscosity	95,000 cP (95,000 mPa*s)
Appearance	Translucent
Non Volatile Content	99.4 %
Specific Gravity	1
Substrate	Glass / Metal / Plastic
Comment	Low Consistency Grease

MED-9021

Glass / Metal / Plastic

0.5 %

300,000 cP

Medium Consistency Grease

Product Details

Property	Average Result
Volatile Content	0.5 %
Viscosity	300,000 cP (300,000 mPa*s)
Appearance	White
Specific Gravity	1.08
Substrate	Glass / Metal / Plastic
Comment	Medium Consistency Grease

MED-9031

Glass / Metal / Plastic

0.3 %

900,000 cP

High Consistency Grease

Product Details

Property	Average Result
Volatile Content	0.3 %
Viscosity	900,000 cP (900,000 mPa*s)
Appearance	White
Specific Gravity	1.11
Substrate	Glass / Metal / Plastic
Comment	High Consistency Grease

High Consistency Rubbers

Product

Durometer

Tensile

Elongation

Tear

Data Sheet

Comment

MED-2174

50 Type A

1,300 psi

750 %

225 ppi

Uncatalyzed

Product Details

Property	Average Result
Durometer	50 Type A
Tensile	1,300 psi (8.97 MPa)
Elongation	750 %
Tear	225 ppi (39.68 kN/m)
Appearance	Clear
Cure	5 minutes / 116 °C
Cure System	Peroxide
Mix Ratio	1 PART
Post Cure	4 hours / 205 °C
Specific Gravity	1.15
Stress at Strain	325 psi / 200 % (2.24 MPa / 200 %)
Comment	Uncatalyzed

MED-4014

15 Type A

700 psi

1,350 %

155 ppi

Low modulus

Product Details

Property	Average Result
Durometer	15 Type A
Tensile	700 psi (4.83 MPa)
Elongation	1,350 %
Tear	155 ppi (27.34 kN/m)
Appearance	Translucent
Cure	10 minutes / 116 °C
Cure Rate Scorch	1.25 minutes
Cure Rate T90	2.5 minutes
Cure System	Platinum
Mix Ratio	1:1
Specific Gravity	1.08
Stress at Strain	40 psi / 200 % (0.28 MPa / 200 %)
Work Time	25 hours
Comment	Low modulus

MED-4019

55 Type A

1,290 psi

645 %

205 ppi

Excellent adhesion and fatigue resistance

Product Details

Property	Average Result
Durometer	55 Type A
Tensile	1,290 psi (8.9 MPa)
Elongation	645 %
Tear	205 ppi (36.2 kN/m)
Appearance	Translucent
Cure	10 minutes / 171 °C
Cure System	Platinum
Cure Type	Heat Cure
Mix Ratio	1:1
Specific Gravity	1.23
Stress at Strain	310 psi / 200 % (2.1 MPa / 200 %)
Work Time	5 hours
Comment	Excellent adhesion and fatigue resistance

MED-4020

25 Type A

1,400 psi

1,250 %

190 ppi

Low modulus with high tear

Product Details

Property	Average Result
Durometer	25 Type A
Tensile	1,400 psi (9.66 MPa)
Elongation	1,250 %
Tear	190 ppi (33.51 kN/m)
Appearance	Translucent
Cure	10 minutes / 116 °C
Cure Rate Scorch	0.95 minutes
Cure Rate T90	2.3 minutes
Cure System	Platinum
Mix Ratio	1:1
Specific Gravity	1.1
Stress at Strain	75 psi / 200 % (0.52 MPa / 200 %)
Work Time	10 hours
Comment	Low modulus with high tear

MED-4025

30 Type A

1,300 psi

900 %

130 ppi

Low tension set

Product Details

Property	Average Result
Durometer	30 Type A
Tensile	1,300 psi (8.97 MPa)
Elongation	900 %
Tear	130 ppi (22.93 kN/m)
Appearance	Translucent
Cure	10 minutes / 171 °C
Cure Rate Scorch	0.75 minutes
Cure Rate T90	2.8 minutes
Cure System	Platinum
Mix Ratio	1:1
Specific Gravity	1.11
Stress at Strain	105 psi / 200 % (0.72 MPa / 200 %)
Work Time	1.5 hours
Comment	Low tension set

MED-4027

30 Type A

2,300 psi

1,050 %

235 ppi

Ultra-high tensile strength

Product Details

Property	Average Result
Durometer	30 Type A
Tensile	2,300 psi (15.86 MPa)
Elongation	1,050 %
Tear	235 ppi (41.45 kN/m)
Appearance	Translucent
Cure	10 minutes / 171 °C
Mix Ratio	1:1
Specific Gravity	1.11
Stress at Strain	100 psi / 200 % (0.69 MPa / 200 %)
Work Time	2.5 hours
Comment	Ultra-high tensile strength

MED-4032

30 Type A

1,200 psi

1,100 %

160 ppi

Can be Cured via Platinum or Peroxide

Product Details

Property	Average Result
Durometer	30 Type A
Tensile	1,200 psi (8.28 MPa)
Elongation	1,100 %
Tear	160 ppi (28.22 kN/m)
Cure	10 minutes / 116 °C
Cure Rate Scorch	1 minutes
Cure Rate T90	3.05 minutes
Mix Ratio	100:1:1
Specific Gravity	1.1
Stress at Strain	140 psi / 200 % (0.97 MPa / 200 %)
Work Time	8 hours
Comment	Can be Cured via Platinum or Peroxide

MED-4035

35 Type A

1,565 psi

1,055 %

195 ppi

High Tear Strength

Product Details

Property	Average Result
Durometer	35 Type A
Tensile	1,565 psi (10.79 MPa)
Elongation	1,055 %
Tear	195 ppi (34.39 kN/m)
Appearance	Translucent
Cure	10 minutes / 116 °C
Cure System	Platinum
Mix Ratio	1:1
Specific Gravity	1.11
Stress at Strain	195 psi / 200 % (1.34 MPa / 200 %)
Work Time	2 hours
Comment	High Tear Strength

MED-4042

40 Type A

1,500 psi

1000 %

160 ppi

Can be Cured via Platinum or Peroxide

Product Details

Property	Average Result
Durometer	40 Type A
Tensile	1,500 psi (10.34 MPa)
Elongation	1000 %
Tear	160 ppi (28.22 kN/m)
Cure	10 minutes / 116 °C
Cure Rate Scorch	0.8 minutes
Cure Rate T90	2.45 minutes
Mix Ratio	100:1:1
Specific Gravity	1.11
Stress at Strain	230 psi / 200 % (1.59 MPa / 200 %)
Work Time	2 hours
Comment	Can be Cured via Platinum or Peroxide

MED-4050

50 Type A

1,500 psi

985 %

250 ppi

High Tear Strength

Product Details

Property	Average Result
Durometer	50 Type A
Tensile	1,500 psi (10.34 MPa)
Elongation	985 %
Tear	250 ppi (44.09 kN/m)
Appearance	Translucent Gray
Cure	10 minutes / 115 °C
Cure Rate Scorch	1.1 minutes
Cure Rate T90	2.6 minutes
Cure System	Platinum
Mix Ratio	1:1
Specific Gravity	1.16
Stress at Strain	300 psi / 200 % (2.07 Mpa / 200 %)
Work Time	3.5 hours
Comment	High Tear Strength

MED-4052

50 Type A

1,445 psi

1100 %

230 ppi

Can be Cured via Platinum or Peroxide

Product Details

Property	Average Result
Durometer	50 Type A
Tensile	1,445 psi (9.97 MPa)
Elongation	1100 %
Tear	230 ppi (40.56 kN/m)
Cure	10 minutes / 116 °C
Cure Rate Scorch	0.7 minutes
Cure Rate T90	2.25 minutes
Mix Ratio	100:1:1
Specific Gravity	1.16
Stress at Strain	280 psi / 200 % (1.93 MPa / 200 %)
Work Time	9 hours
Comment	Can be Cured via Platinum or Peroxide

MED-4055

55 Type A

1,700 psi

900 %

300 ppi

Ultra-high tear strength

Product Details

Property	Average Result
Durometer	55 Type A
Tensile	1,700 psi (11.72 MPa)
Elongation	900 %
Tear	300 ppi (52.91 kN/m)
Appearance	Translucent
Cure	10 minutes / 138 °C
Cure Rate Scorch	1 minutes
Cure Rate T90	2.85 minutes
Cure System	Platinum
Mix Ratio	1:1
Post Cure	4 hours / 177 °C
Specific Gravity	1.14
Stress at Strain	500 psi / 200 % (3.45 MPa / 200 %)
Work Time	2.5 hours
Comment	Ultra-high tear strength

MED-4062

60 Type A

1,400 psi

1000 %

250 ppi

Can be Cured via Platinum or Peroxide

Product Details

Property	Average Result
Durometer	60 Type A
Tensile	1,400 psi (9.66 MPa)
Elongation	1000 %
Tear	250 ppi (44.09 kN/m)
Cure	10 minutes / 116 °C
Cure Rate Scorch	0.7 minutes
Cure Rate T90	2.3 minutes
Mix Ratio	100:1:1
Specific Gravity	1.16
Stress at Strain	300 psi / 200 % (2.07 Mpa / 200 %)
Work Time	11 hours
Comment	Can be Cured via Platinum or Peroxide

MED-4065

65 Type A

1,250 psi

1000 %

250 ppi

High Tear Strength

Product Details

Property	Average Result
Durometer	65 Type A
Tensile	1,250 psi (8.62 MPa)
Elongation	1000 %
Tear	250 ppi (44.09 kN/m)
Appearance	Translucent Tan
Cure	10 minutes / 116 °C
Cure Rate Scorch	0.85 minutes
Cure Rate T90	2.65 minutes
Cure System	Platinum
Mix Ratio	1:1
Specific Gravity	1.2
Stress at Strain	350 psi / 200 % (2.41 MPa / 200 %)
Work Time	6 hours
Comment	High Tear Strength

MED-4070

70 Type A

1,430 psi

750 %

300 ppi

Abrasion / Fatigue Resistant

Product Details

Property	Average Result
Durometer	70 Type A
Tensile	1,430 psi (9.86 MPa)
Elongation	750 %
Tear	300 ppi (52.91 kN/m)
Appearance	Translucent
Cure	10 minutes / 138 °C
Cure Rate Scorch	0.9 minutes
Cure Rate T90	2.7 minutes
Cure System	Platinum
Mix Ratio	1:1
Post Cure	4 hours / 177 °C
Specific Gravity	1.19
Stress at Strain	600 psi / 200 % (4.14 MPa / 200 %)
Work Time	2 hours
Comment	Abrasion / Fatigue Resistant

MED-4072

70 Type A

1,100 psi

875 %

240 ppi

Can be Cured via Platinum or Peroxide

Product Details

Property	Average Result
Durometer	70 Type A
Tensile	1,100 psi (7.59 MPa)
Elongation	875 %
Tear	240 ppi (42.33 kN/m)
Cure	10 minutes / 116 °C
Cure Rate Scorch	0.55 minutes
Cure Rate T90	1.9 minutes
Mix Ratio	100:1:1
Specific Gravity	1.22
Stress at Strain	450 psi / 200 % (3.1 MPa / 200 %)
Work Time	4 hours
Comment	Can be Cured via Platinum or Peroxide

MED-4080

80 Type A

1,150 psi

700 %

225 ppi

High Tear Strength

Product Details

Property	Average Result
Durometer	80 Type A
Tensile	1,150 psi (7.93 MPa)
Elongation	700 %
Tear	225 ppi (39.68 kN/m)
Appearance	Translucent Tan
Cure	10 minutes / 116 °C
Cure Rate Scorch	0.8 minutes
Cure Rate T90	2.75 minutes
Cure System	Platinum
Mix Ratio	1:1
Specific Gravity	1.2
Stress at Strain	450 psi / 200 % (3.1 MPa / 200 %)
Work Time	8 hours
Comment	High Tear Strength

MED-4082

80 Type A

1,150 psi

900 %

200 ppi

Can be Cured via Platinum or Peroxide

Product Details

Property	Average Result
Durometer	80 Type A
Tensile	1,150 psi (7.93 MPa)
Elongation	900 %
Tear	200 ppi (35.27 kN/m)
Cure	10 minutes / 116 °C
Cure Rate Scorch	0.6 minutes
Cure Rate T90	2.2 minutes
Mix Ratio	100:1:1
Specific Gravity	1.22
Stress at Strain	400 psi / 200 % (2.76 MPa / 200 %)
Work Time	16 hours
Comment	Can be Cured via Platinum or Peroxide

MED-4120

30 Type A

1,300 psi

950 %

140 ppi

Uncatalyzed

Product Details

Property	Average Result
Durometer	30 Type A
Tensile	1,300 psi (8.97 MPa)
Elongation	950 %
Tear	140 ppi (24.69 kN/m)
Appearance	Translucent
Cure	5 minutes / 116 °C
Cure Rate Scorch	0.55 minutes
Cure Rate T90	2.1 minutes
Cure System	Peroxide
Mix Ratio	1 PART
Post Cure	2 hours / 177 °C
Specific Gravity	1.1
Stress at Strain	100 psi / 200 % (0.69 MPa / 200 %)
Comment	Uncatalyzed

MED-4128

25 Type A

1,010 psi

800 %

70 ppi

Low Tension Set, Uncatalyzed

Product Details

Property	Average Result
Durometer	25 Type A
Tensile	1,010 psi (6.97 MPa)
Elongation	800 %
Tear	70 ppi (12.35 kN/m)
Appearance	Translucent
Cure	10 minutes / 116 °C
Cure Rate Scorch	0.55 minutes
Cure Rate T90	1.65 minutes
Cure System	Peroxide
Mix Ratio	1 PART
Post Cure	2 hours / 200 °C
Specific Gravity	1.11
Stress at Strain	90 psi / 200 % (0.62 MPa / 200 %)
Comment	Low Tension Set, Uncatalyzed

MED-4135

35 Type A

1,250 psi

800 %

110 ppi

Uncatalyzed

Product Details

Property	Average Result
Durometer	35 Type A
Tensile	1,250 psi (8.62 MPa)
Elongation	800 %
Tear	110 ppi (19.4 kN/m)
Appearance	Translucent
Cure	5 minutes / 116 °C
Cure Rate Scorch	0.55 minutes
Cure Rate T90	2.1 minutes
Cure System	Peroxide
Mix Ratio	1 PART
Post Cure	2 hours / 177 °C
Specific Gravity	1.1
Stress at Strain	190 psi / 200 % (1.31 MPa / 200 %)
Comment	Uncatalyzed

MED-4150

50 Type A

1,400 psi

750 %

190 ppi

Uncatalyzed

Product Details

Property	Average Result
Durometer	50 Type A
Tensile	1,400 psi (9.66 MPa)
Elongation	750 %
Tear	190 ppi (33.51 kN/m)
Appearance	Translucent
Cure	5 minutes / 116 °C
Cure Rate Scorch	0.5 minutes
Cure Rate T90	1.9 minutes
Cure System	Peroxide
Mix Ratio	1 PART
Post Cure	2 hours / 177 °C
Specific Gravity	1.16
Stress at Strain	250 psi / 200 % (1.72 MPa / 200 %)
Comment	Uncatalyzed

MED-4174

50 Type A

1,200 psi

775 %

225 ppi

Uncatalyzed

Product Details

Property	Average Result
Durometer	50 Type A
Tensile	1,200 psi (8.28 MPa)
Elongation	775 %
Tear	225 ppi (39.68 kN/m)
Appearance	Translucent
Cure	5 minutes / 116 °C
Cure Rate Scorch	0.55 minutes
Cure Rate T90	1.7 minutes
Cure System	Peroxide
Mix Ratio	1 PART
Post Cure	4 hours / 205 °C
Specific Gravity	1.15
Stress at Strain	325 psi / 200 % (2.24 MPa / 200 %)
Comment	Uncatalyzed

MED-4520

28 Type A

1,320 psi

950 %

135 ppi

Uncatalyzed

Refine results

Market

Product type

Appearance

Cure System

Cure Type

Durometer

Elongation

Extrusion Rate

Mix Ratio

Non Volatile Content

Penetration

Refractive Index

Rheology

Solvent

Specific Gravity

Substrate

Tack

Tack Free Time

Tear

Tensile

Thermal Conductivity

Viscosity

Volatile Content

Work Time

Add filters

Additives

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details

Product Details