Description
- Two-part, white, thermally conductive silicone
- Will cure with the addition of heat
- 10: 1 Mix Ratio (Part A: Part B)
Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
- To provide heat transfer between electrical/electronic components and their heat sinks
- Use to adhere integrated circuit substrates, base plates, heat sinks or where grooves or other configurations require a flowable to limited flow material
Product Details
Property | Average Result |
---|---|
Thermal Conductivity | 1.11 W/(mK) |
Viscosity | 900,000 cP (900,000 mPa*s) |
Cure System | Platinum |
Tensile | 250 psi (1.72 MPa) |
Appearance | White |
Cure | 4 hours / 65 °C |
Durometer | 75 Type A |
Elongation | 60 % |
Mix Ratio | 10:1 |
Specific Gravity | 1.45 |
Tack Free Time | 4 hours |
Tear | 55 ppi (9.7 kN/m) |
Work Time | 2 hours |
Comment | *22) 1.1 W/mK |
![](/m-nusil.avantorsciences.com/en_US/images/satellite-in-space-375x235.jpg)
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.