Description
- Two-part, tan-colored, electrically conductive silicone
- 20:1 Mix Ratio (Part A: Part B)
Applications
- For applications requiring low volatility
- Well suited for form-in-place conductive gaskets
- Use as a thermally or electrically conductive interface material
Product Details
| Property | Average Result |
|---|---|
| Cure System | Platinum |
| Viscosity | 186,200 cP (186,200 mPa*s) |
| Durometer | 85 Type A |
| Appearance | Tan |
| Cte | |
| Cure | 30 minutes / 150 C |
| Elongation | 70 % |
| Ionic Content Cl | <5 ppm |
| Ionic Content K | <7 ppm |
| Ionic Content Na | <5 ppm |
| Mix Ratio | 20:1 |
| Specific Gravity | 3.39 |
| Tensile | 525 psi (3.62 MPa) |
| Thermal Conductivity | 1.2 W/(mK) |
| Volume Resistivity | 0.01 ohmcm |
| Work Time | 2.75 hours |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.