Description
- Two-part, brown fluorosilicone system
- Offers high tear strength, strong physical properties Convenient 1:1 mix ratio (Part A: Part B)
- 100 mole % fluorosilicone
Applications
- For applications requiring fuel and solvent resistance
- For applications requiring a broad operating temperature range
- Cures at ambient conditions or rapidly with the addition of heat
Product Details
| Property | Average Result |
|---|---|
| Cure System | Platinum |
| Extrusion Rate | 50 g/minute |
| Lap Shear | 280 psi (1.93 MPa) |
| Durometer | 29 Type A |
| Appearance | Brown |
| Cure | 24 hours / RTV |
| Elongation | 300 % |
| Mix Ratio | 1:1 |
| Specific Gravity | 1.4 |
| Tensile | 750 psi (5.17 MPa) |
| Work Time | 3 hours |
| Comment | 100% F, For applications requiring fuel and solvent resistance |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.