Premium Care Line




  • One-part, translucent, self-leveling silicone adhesive
  • Cures at room temperature upon exposure to atmospheric moisture
  • Supplied ready to use in Semco® cartridges


  • Well suited for use as an adhesive for bonding and sealing silicone materials
  • For applications requiring the bonding of silicone to metals, urethanes and various other substrates
NuSil Technology’s MED-1040 shall not be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Cure Type RTV
Mix Ratio 1 PART
Rheology Flowable / Self Leveling
Appearance Translucent
Cure 72 hours / RTV
Cure System Acetoxy
Durometer 23 Type A
Elongation 340 %
Extrusion Rate 4 g/minute
Flow Rate 2.2 in (55.88 mm)
Specific Gravity 1.03
Substrate Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium
Tack Free Time 9.5 minutes
Tear 17 ppi (3 kN/m)
Tensile 265 psi (1.83 MPa)
Comment High flow

The Strongest Silicone Elastomer Ever Developed

Dr. Jim Lambert, NuSil® Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.

Read more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.