Description
- Two-part, red, pourable, fluorosilicone silicone system
- 10:1 Mix Ratio (Part A:B)
- Cures with heat
- 100 mole % fluorosilicone
Applications
- For applications requiring solvent resistance
- As a potting, encapsulating and sealing material
- For molding parts such as O-rings, stoppers, and seals
- For applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F)
Product Details
| Property | Average Result |
|---|---|
| Cure System | Platinum |
| Viscosity | 70,000 cP (70,000 mPa*s) |
| Durometer | 20 Type A |
| Tensile | 185 psi (1.28 MPa) |
| Elongation | 135 % |
| Appearance | Red |
| cure | |
| Mix Ratio | 10:1 |
| Specific Gravity | 1.44 |
| Work Time | 7 hours |
| Comment | LCE Fluoro Elastomer;100% Fluorosilicone, flowable mixed viscosity, and 7 hr. pot life. |
Making the right choice for fuel- and solvent-resistant silicones
Learn how high-purity fluorosilicones resist degradation and maintain performance in aviation and defense applications.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.