Description
- Two-part, black, static dissipative silicone
- Offers low modulus
- 1:1 Mix Ratio (Part A: Part B)
Applications
- For applications requiring low volatility
- Use for static dissipation in electronic components
- Use for any application where grooves and other configurations require a non-flowing to limited flow material
Product Details
| Property | Average Result |
|---|---|
| Cure System | Platinum |
| Viscosity | 675,000 cP (675,000 mPa*s) |
| Lap Shear | 325 psi (2.24 MPa) |
| Durometer | 30 Type A |
| Appearance | Black |
| Cure | 24 hours / RTV |
| Elongation | 350 % |
| Ionic Content Cl | <5 ppm |
| Ionic Content K | <1 ppm |
| Ionic Content Na | <6 ppm |
| Mix Ratio | 1:1 |
| Operating Temperature | -100 °C / 300 °C |
| Specific Gravity | 1.05 |
| Tear | 30 ppi (5.29 kN/m) |
| Tensile | 500 psi (3.45 MPa) |
| Thermal Conductivity | 0.22 W/(mK) |
| Volume Resistivity | 535 ohmcm |
| Work Time | 1 minutes |
| Comment | Carbon filled. |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.