Description
- Two-part, translucent, pourable silicone system
- Offers a high tear strength, good physical properties
- 10:1 Mix Ratio (Part A:B)
Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
- To provide protection of electric components and assemblies against shock, vibration, moisture, dust, chemicals and other environmental hazards
- Ideal for use in potting connectors, cable harness breakouts, molded high-voltage terminals, seals and gaskets due to a high tear strength
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
| Property | Average Result |
|---|---|
| Cure System | Platinum |
| Viscosity | 90,000 cP (90,000 mPa*s) |
| Durometer | 35 Type A |
| Appearance | Translucent |
| Cure | 15 minutes / 150 °C |
| Elongation | 400 % |
| Mix Ratio | 10:1 |
| Specific Gravity | 1.1 |
| Tack Free Time | 15 hours |
| Tear | 75 ppi (13.23 kN/m) |
| Tensile | 925 psi (6.38 MPa) |
| Work Time | 3 hours |
| Comment | Tough, self leveling and good adhesion to various metals. |
Specialty Silicones for Displays
The NuSil® line of optoelectronic silicones enable device manufacturers from smart phones to stadium screens and everything in between to create next-generation displays that are sharper, brighter and more rugged.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.