• Two Part, Translucent, 1:1 Mix ratio (A:B)
  • Cures at room temperature or rapidly with the application of heat in an oven, or by a heat gun or lamp
  • Non-slump but is easily dispensed
  • Does not require atmospheric moisture to cure
  • No curing byproducts such as acetic acid or methyl alcohol
  • REACh and RoHS compliant


  • As adhesives for bonding and sealing silicones to each other and other substrates such as metals and plastics
  • Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
  • Protects electrical components and assemblies against shock, vibration, moisture, dust, chemicals, and other environmental hazards

Product Details

Property Average Result
Viscosity 180,000 cP (180,000 mPa*s)
Durometer 40 Type A
Appearance Translucent
Dielectric Strength 630 volts/mil (24.57 kV/mm)
Elongation 250 %
Flow Rate 0.3 in (7.62 mm)
Specific Gravity 1.1
Tack Free Time 4 hours
Tensile 650 psi (4.48 MPa)
Volatile Content 0.3 %
Work Time 1.5 hours

Specialty Silicones for Displays

The NuSil® line of optoelectronic silicones enable device manufacturers from smart phones to stadium screens and everything in between to create next-generation displays that are sharper, brighter and more rugged.

Read more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.