Description
- One-part, black, electrically conductive and static dissipative RTV silicone
- Cures at room temperature to form a flexible, resilient, conductive bond or seal
- Good adhesion across a broad temperature range
- Based on a dimethyl diphenyl silicone copolymer
- Oxime cure system
Applications
- For applications requiring a non-corrosive adhesive / sealant
- For RFI and EMI shielding for industrial and electronic applications
- Provides protection from extremes in temperature, humidity, radiation, thermal stress and mechanical stress
- Excellent for form-in-place conductive gaskets and for bleeding off static electricity
- Provides good radiation resistance
- For applications requiring an operating temperature range of -115°C to 260°C (-175°F to 500°F)
Product Details
Property | Average Result |
---|---|
Volume Resistivity | 8 ohmcm |
Cure System | Oxime |
Durometer | 75 Type A |
Tensile | 525 psi (3.62 MPa) |
Appearance | Black |
Cure | 7 days / 25 °C |
Dielectric Strength | 10 volts/mil (0.39 kV/mm) |
Elongation | 25 % |
Flow Rate | 0.1 in (2.54 mm) |
Lap Shear | 290 psi (2 MPa) |
Mix Ratio | 1 PART |
Non Volatile Content | 100 % |
Specific Gravity | 1.23 |
Tack Free Time | 10 minutes |
Thermal Conductivity | 0.3 W/(mK) |
Comment | 8 ohmcm. Static Dissipation |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.