Description
- Two-part, white silicone system
- Offers medium strength, low modulus, good physical properties and a broad operating temperature range
- 1:1 Mix Ratio (Part A:B)
Applications
- To provide protection of electric components and assemblies against shock, vibration, moisture, dust, chemicals and other environmental hazards
- Ideal for adhesive applications where a large surface must be covered
- For applications requiring minimal outgassing
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
| Property | Average Result |
|---|---|
| Cure System | Platinum |
| Viscosity | 12,300 cP (12,300 mPa*s) |
| Lap Shear | 300 psi (2.07 MPa) |
| Durometer | 30 Type A |
| Appearance | White |
| Cure | 4 hours / 65 °C |
| Elongation | 250 % |
| Mix Ratio | 1:1 |
| Specific Gravity | 1.1 |
| Tack Free Time | 20 hours |
| Tensile | 450 psi (3.1 MPa) |
| Comment | White, versatile adhesive with short pot life, tack free in 20 hrs Recommended for broad temperature applications. 300 psi (2.1 MPa) primed (CF1-135) lap shear. |
Specialty Silicones for Displays
The NuSil® line of optoelectronic silicones enable device manufacturers from smart phones to stadium screens and everything in between to create next-generation displays that are sharper, brighter and more rugged.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.