Description
- Two-part, optically clear, solvent free, low viscosity silicone
- Cures at room temperature or rapidly with heat
- Offers good physical and electrical stability across a broad range of temperatures
- Convenient 1:1 Mix ratio
Applications
- To provide protection of electronic components and assemblies against shock, vibration, moisture, ozone, dust, chemicals and other environmental hazards by potting or encapsulating
- For photonics applications such as HBLEDs, photo detectors, lasers, discrete optics and flat panel displays that require a 1.41 refractive index
Product Details
Property | Average Result |
---|---|
Cure System | Platinum |
Viscosity | 1,300 cP (1,300 mPa*s) |
Durometer | 30 Type A |
Tensile | 120 psi (0.83 MPa) |
Elongation | 100 % |
Appearance | Clear |
Cure | 30 minutes / 150 °C |
Dielectric Strength | 500 volts/mil (19.5 kV/mm) |
Mix Ratio | 1:1 |
Refractive Index | 1.41 |
Volume Resistivity | 1,000,000,000,000,000 ohmcm |
Work Time | 4 hours |
Comment | Versatile, clear coating, cure can be heat accelerated. |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.