Description
- Two-part, black, 50 mole % fluorosilicone elastomer
- Cures at room temperature or rapidly with heat
- 1:1 Mix Ratio (Part A: B)
Applications
- For applications requiring solvent resistance
- For molding parts such as O-rings, stoppers, and seals
Product Details
Property | Average Result |
---|---|
Cure System | Platinum |
Extrusion Rate | 117 g/minute |
Lap Shear | 350 psi (2.41 MPa) |
Durometer | 35 Type A |
Appearance | Black |
Attribute | |
Cure | 48 hours / RTV |
Elongation | 265 % |
Mix Ratio | 1:1 |
Operating Temperature | -65 °C / 240 °C |
Specific Gravity | 1.28 |
Tensile | 600 psi (4.14 MPa) |
Work Time | 1 hours |
Comment | Fuel Resistance |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.