Description
- Two-part, optically clear silicone system
- 10:1 Mix Ratio (Part A:B)
Applications
- For electronic and space applications requiring Ultra Low OutgassingTM and minimal volatile condensables to avoid condensation in sensitive devices
- As an embedding or potting compound for environmental protection of electronic assemblies and components
- Provides protection from humidity, radiation, thermal stress and mechanical stress
- As an adhesive in low-strength applications such as solar cell arrays where clarity and low volatility are important
- For applications requiring a broader operating temperature range
Exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤0.1% and CVCM of ≤0.010%
Product Details
| Property | Average Result |
|---|---|
| Cure System | Platinum |
| Viscosity | 9,500 cP (9,500 mPa*s) |
| Lap Shear | 375 psi (2.59 MPa) |
| Durometer | 45 Type A |
| Appearance | Clear |
| Cure | 15 minutes / 150 °C |
| Elongation | 125 % |
| Mix Ratio | 10:1 |
| Special Feature | |
| Specific Gravity | 1.02 |
| Tensile | 950 psi (6.55 MPa) |
| Comment | Pourable |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.