Premium Care Line

MED4-4115

HIGH CONSISTENCY SILICONE ELASTOMERS

Description

  • Pre-catalyzed, high consistency elastomer
  • Medium durometer
  • Strained through a 400-mesh screen (minimum)

Applications

  • For a wide variety of fabrication techniques for the healthcare industry including: molding, calendering and extruding
NuSil Technology’s MED4-4115 shall not be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Durometer 50 Type A
Tensile 1,600 psi (11.03 MPa)
Elongation 500 %
Tear 100 ppi (17.64 kN/m)
Appearance Translucent
Cure 5 minutes / 116 °C
Cure Rate Scorch 0.65 minutes
Cure Rate T90 2.2 minutes
Cure System Peroxide
Mix Ratio 1 PART
Plasticity
Post Cure 2 hours / 249 °C
Specific Gravity 1.15
Stress at Strain 400 psi / 200 % (2.76 MPa / 200 %)
Comment Non-Vinyl Specific Peroxide Precatalyzed

The Strongest Silicone Elastomer Ever Developed

Dr. Jim Lambert, NuSil® Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.

Read more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.