Description
- Two-part, white, thermally conductive silicone
- Cures with the addition of heat
- Mix Ratio 10:1 (Part A:B)
- Designed for enhanced performance in extreme low and high temperatures
Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
- To provide moderate heat transfer between electrical/electronic components and their heat sinks
- Use for adhering openings in modules and housings where grooves or other configurations require a limited flow material
- For applications requiring a broader operating temperature range
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
| Property | Average Result |
|---|---|
| Thermal Conductivity | 0.79 W/(mK) |
| Viscosity | 300,000 cP (300,000 mPa*s) |
| Cure System | Platinum |
| Tensile | 275 psi (1.9 MPa) |
| Appearance | White |
| Cte | |
| Cure | 30 minutes / 150 °C |
| Durometer | 75 Type A |
| Elongation | 40 % |
| Lap Shear | 205 psi (1.41 MPa) |
| Mix Ratio | 10:1 |
| Specific Gravity | 1.38 |
| Tack Free Time | 3.5 hours |
| Tear | 45 ppi (7.94 kN/m) |
| Work Time | 2 hours |
| Comment | *22) 0.8 W/mK Low Viscosity, *3) Primed Lap Shear 205 psi (1.4 MPa), Low Temp |
Encapsulation Technology
Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.