Description
- One-Part, translucent silicone RTV
- Non-slumping in thin sections
Applications
- For applications requiring extreme low temperature, low outgassing and minimal volatile condensables under extreme operating conditions
- As a sealing, caulking, adhesive or potting material in electronics and space applications requiring minimal outgassing to avoid condensation in sensitive devices
- For bonding and sealing in applications such as overhead or vertical joints that require a non-slumping and one-part material
- For applications requiring a broader operating temperature range
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
| Property | Average Result |
|---|---|
| Cure System | Oxime |
| Extrusion Rate | 35 g/minute |
| Lap Shear | 375 psi (2.59 MPa) |
| Durometer | 45 Type A |
| Appearance | Translucent |
| Cte | |
| Cure | 7 days / RTV |
| Dielectric Strength | 1,100 volts/mil (42.9 kV/mm) |
| Elongation | 300 % |
| Mix Ratio | 1 PART |
| Refractive Index | 1.43 |
| Specific Gravity | 1.11 |
| Tack Free Time | 20 minutes |
| Tensile | 700 psi (4.83 MPa) |
| Comment | For applications requiring a broader operating temperature range. Available in black and white. 200 psi (1.4 MPa), Unprimed lap shear. |
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.