Description
- Two-part silicone elastomer dispersed in xylene
- Cures to a thin silicone film that decreases the coefficient of friction (CoF) compared to the uncoated silicone and increases abrasion resistance for moving, sliding, and rubbing parts
- Cures via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
Applications
- Low viscosity makes dispersions ideal for use as sprayable coatings
- For coating of tubing (ID/OD), balloons, valves, stoppers, o-rings, and for other silicone parts
NuSil™ MED10-6670 shall not be considered for use in human implantation for a period of greater than 29 days.
Product Details
Property | Average Result |
---|---|
Cure System | Platinum |
Non Volatile Content | 25 % |
Appearance | Translucent |
Cure | 5 minutes / RTV |
Mix Ratio | 1:1 |
Solvent | Xylene |
The Strongest Silicone Elastomer Ever Developed
Dr. Jim Lambert, NuSil® Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.