Description
- Two-part, optically clear silicone system
- 10:1 mix ratio (Part A:B)
Applications
- For electronic and space applications requiring low outgassing and minimal volatile condensables to avoid condensation in sensitive devices
- As an embedding or potting compound for environmental protection of electronic assemblies and components
- Provides protection from humidity, radiation, thermal stress and mechanical stress
- As an adhesive in applications such as solar cell arrays where clarity and low volatility are important
- For applications requiring a broader operating temperature range
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
| Property | Average Result |
|---|---|
| Cure System | Platinum |
| Viscosity | 8,000 cP (8,000 mPa*s) |
| Lap Shear | 400 psi (2.76 MPa) |
| Durometer | 50 Type A |
| Appearance | Clear |
| Cure | 15 minutes / 150 °C |
| Elongation | 125 % |
| Mix Ratio | 10:1 |
| Specific Gravity | 1.02 |
| Tack Free Time | 10 hours |
| Tensile | 1,000 psi (6.9 MPa) |
| Work Time | 2 hours |
| Comment | Pourable, Optically Clear |
What Is Space Grade?
Discover what it takes to make silicones worthy of the distinction "Space Grade" and the rigorous testing that these materials undergo.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.