Description
- Two-part, tan-colored electrically conductive silicone
- 20:1 Mix Ratio (Part A:B)
Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
- Use for RFI and EMI shielding in electrical and space applications
- Well suited for form-in-place conductive gaskets
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
| Property | Average Result |
|---|---|
| Volume Resistivity | 0.01 ohmcm |
| Viscosity | 224,500 cP (224,500 mPa*s) |
| Cure System | Platinum |
| Durometer | 85 Type A |
| Tensile | 525 psi (3.62 MPa) |
| Appearance | Tan |
| Cte | |
| Cure | 30 minutes / 150 °C |
| Elongation | 86 % |
| Mix Ratio | 20:1 |
| Specific Gravity | 3.39 |
| Thermal Conductivity | 1.2 W/(mK) |
| Work Time | 2.75 hours |
| Comment | 0.005 ohmcm, *22) 1.2 W/mK |
Encapsulation Technology
Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.