Description
- One-part, self-leveling, solvent-free silicone material
- Cures at room temperature upon exposure to atmospheric moisture
Applications
- Bonds aggressively to most surfaces including: glass, ceramics, most metals, natural and synthetic fibers, wood, painted surfaces, many plastics and other silicone rubbers
Product Details
| Property | Average Result |
|---|---|
| Cure System | Acetoxy |
| Extrusion Rate | 100 g/minute |
| Durometer | 25 Type A |
| Appearance | Translucent |
| Cure | 72 hours / RTV |
| Elongation | 750 % |
| Flow Rate | 2 in (50.8 mm) |
| Mix Ratio | 1 PART |
| Specific Gravity | 1.12 |
| Stress at Strain | 110 psi / N/A (0.76 MPa / N/A) |
| Tack Free Time | 10 minutes |
| Tear | 100 ppi (17.64 kN/m) |
| Tensile | 1,400 psi (9.66 MPa) |
| Volatile Content | 2.4 % |
| Comment | Primerless Adhesive;Self leveling. General all purpose adhesive for a variety of substrates. |
Specialty Silicones for Displays
The NuSil® line of optoelectronic silicones enable device manufacturers from smart phones to stadium screens and everything in between to create next-generation displays that are sharper, brighter and more rugged.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.