Description
- One part, RTV silicone dispersion
- Cures at room temperature upon exposure to atmospheric moisture
Applications
- Suitable for dip casting and heat-curing of thin elastomeric films
- For use as an adhesive for bonding and sealing silicone together
- Low viscosity makes dispersions ideal for use as sprayable coatings
- Provides good adhesion to metals and other substrates
- Designed for dipping or wiping
NuSil Technology’s MED6-6606 may be considered for use in human implantation for a period of greater than 29 days.
Product Details
| Property | Average Result |
|---|---|
| Cure Type | RTV |
| Mix Ratio | 1 PART |
| Rheology | Flowable / Self Leveling |
| Appearance | Translucent |
| Cure | 3 days / RTV |
| Cure System | Acetoxy |
| Durometer | 20 Type A |
| Elongation | 800 % |
| Non Volatile Content | 30 % |
| Specific Gravity | 1.11 |
| Stress @ Strain | |
| Substrate | Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate / Stainless steel |
| Tear | 115 ppi (20.28 kN/m) |
| Tensile | 1,190 psi (8.21 MPa) |
| Viscosity | 95 cP (95 mPa*s) |
| Comment | Silicone adhesive dispersed in heptane |
Contact NuSil® to Order Now
For nearly 40 years, the NuSil brand has offered a wide range of high-purity silicone adhesives for use in medical devices. Our team is ready to collaborate with you to provide medical grade silicone solutions to satisfy your unique adhesion requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.