You searched for: Microscopy and staining reagents

Supplier: Avantik

Optik Type 2 Alcoholic Clarifier is designed to be used with Type 2 Hematoxylin to produce cell transparency and remove any non-specific staining. Slightly milder clarifier than the Optik Aqueous Clarifier.

Supplier: Electron Microscopy Sciences

Handy pellet form melts rapidly.

Supplier: Electron Microscopy Sciences

A unique embedding primer.

Supplier: Biotium

EverBrite™ Mounting Media are anti-fade mountants for preserving fluorescence during microscopy

Supplier: Electron Microscopy Sciences

For some tissues, the use of formalin (contains 10 – 15% Methanol) is not suitable, we offer the alternative formaldehyde (prepared from paraformaldehyde – contains no methanol) for your convenience.

Supplier: Electron Microscopy Sciences

Reduces infiltration time by one-third. Cuts to 2 micron thickness with excellent ribbon continuity.

Supplier: Electron Microscopy Sciences

for bonding strain gages and special-purpose sensors, useful in temperatures from -452°F to +350° F (-269°C to +175°C), recommended for transducer applications up to +250°F (+120°C), Shelf Life, Post Life and Pot life:about nine months, C

Supplier: Electron Microscopy Sciences

The Crystal Clear™ series of polyurethane resins are designed for applications that require absolute clarity

Supplier: Electron Microscopy Sciences

Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range of embedding conditions. These resins provide low viscosity at low temperatures.

Supplier: G-Biosciences

Decolorizer (Truant-Moore) reagent is used in the Fluorescent microscopic detection of mycobacteria.

Supplier: Electron Microscopy Sciences

The one glue we all know and have used.

Supplier: Genetex

FluoroGel is an aqueous-based mounting medium designed for the preservation of fluorescence-stained tissue sections.

Supplier: Electron Microscopy Sciences

When preparation requirements include less expensive, uniform size and shape, and short processing times, hot mounting (hot compression mounting) is ideal. Hot mounting takes place under pressure in a mounting press, where the specimen is placed in a cylinder together with the appropriate mounting resin.

Supplier: Electron Microscopy Sciences

This EMS Xylene Substitute solution is specially designed for use in processing and staining histological/cytological specimens. It is essentially odorless with low toxicity, less irritating to the skin than xylene- and d-limonene-based clearants. It can be substituted for xylene and can be used with almost all tissue processors and automated slide stainers.

Supplier: Electron Microscopy Sciences

This mixture is less viscous than the final embedding mixture of EMbed-812.

Supplier: Avantik

Optik Type 1 Clarifier is a uniquely formulated buffer that enhances cytoplasmic details, increases cell transparency and helps eliminate background staining.

Supplier: G-Biosciences

QuenchShield™ Mountant is glycerol based aqueous mountant, which prevents quenching of fluorescence of fluorescent labeled cells and tissues samples during fluorescence microscopy experiments. In addition, it helps preserve the fluorescence of stored slides.

Supplier: Electron Microscopy Sciences

Fluoro-Gel Mounting Medium with a strong anti-fading agent 1,4-phenylenediamine is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula preserves rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 388, Alexa Fluoro 594 tetramethyly rhodamine, and Redox. The fluorescence is retained during prolong storage at 4°C in the dark. This medium contains Phynylenediamine and is not suitable for immunofluorescence of Cy dyes, Phycoerythrin (R-PR) phycocyanin  (PC), and allophycocyanin (APC).

Supplier: Electron Microscopy Sciences

Kit consists of 500 mL LR Gold Resin, 100g Polyvinylpyrolidone; 50g Benzoyl Peroxide, and 50g Benzil.

Supplier: Honeywell Research Chemicals

UV-transparent, fluorescence-free immersion oil.

Supplier: Electron Microscopy Sciences

Premixed, prebuffered fixatives, that are pH adjusted for immediate laboratory use. They are freshly prepared upon receipt of order to ensure maximum shelf life. The fixatives are filled in 20 mL glass vials (10 mL/vial). This allows for the immediate fixation of your specimens without costly and time consuming transfer associated with ampoule contained fixatives.

Supplier: Electron Microscopy Sciences

Fluoro-Gel is a water based mounting medium designed for the permanent mounting of fluorescent stained tissues, which may either be damaged or soluble in organic solvents, such as xylene or toluene. This unique formula prevents rapid photo-bleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 488, Alexa Fluoro 594, Green Fluorescent Protein (GFP), Tetramethylyrhodamine, Redox, Phycoerythrin (RP-E), Phyocyanin (PC), and Allophycocyanin (APC). The fluorescence is retained during prolonged storage at 4 °C in the dark. Application: Immunofluorescence, confocal microscope.

Supplier: Leica Biosystems

Sta-On is a liquid, non-coagulating adhesive that is easy to use, convenient and reliable.

Supplier: Streck Laboratories

Easy-to-use liquid preservatives stabilize cell morphology and preserve cellular antigen expression

Supplier: Electron Microscopy Sciences

Adhesive 154 is an easy-to-apply resistance coating designed to provide high lubricity, conductivity, and excellent release properties to many non-conductive substrates, including most plastics.

Supplier: Electron Microscopy Sciences

Slide coating cup with stand and cleaning brush. Glass cup is Pyrex and is designed to conserve expensive autoradiographic emulsion when coating glass slides. Needs only 1/4 the volume of solution previously required. Single piece holder permits immersion in a water bath and provides a stable darkroom stand to prevent spills, and faster temperature adjustment of the emulsion.

Supplier: Mopec

Mopec’s Formaway formalin neutralizing powder safely and easily neutralizes spent formalin waste to a non-hazardous and non-toxic solution in only 20 minutes. Contents are emptied directly into 1 gallon of spent 10% Formalin or 4% Glutaldehyde, reducing risk exposure to lab personnel. This unique formula also eliminates drain-clogging polymers.

Supplier: Chemplex

Converts powdered samples into a slurry to eliminate segregation by size or density during comminution process.

Supplier: Electron Microscopy Sciences

Cargille PCB-Free Immersion oils were introduced in 1972. Today, no other immersion oil meets FDA criteria.  Now four standard types are available with the introduction of Type NVH, a very high viscosity oil. All Cargille Immersion Oils meet DIN 58 884 (Deutsche Institut Fur Normung e.V.).

Supplier: Diagnostic Biosystems

ImmunoHisto-Sealer™ is a preservation solution that acts as a sealant to improve tissue morphology and stain over an extended period of time. When applied to the stained section, specimens can be permanently mounted without chromogens fading. Additional benefits of the ImmunoHisto-Sealer™ include: saves hands on time when mounting slides, avoids the use of toxic chemicals such as xylene and eliminates accumulation of hazardous waste. This product is designed for tissue specimens stained with peroxidase, alkaline phosphatase-based systems and various chromogens. After treating with ImmunoHisto-Sealer, water solution chromogens can be mounted in Permanent Mounting Media