You searched for: Microscopy and staining reagents

Supplier: G-Biosciences

Decolorizer is used with the Kinyoun or Ziehl-Neelson Carbolfuchsin staning procedure.

Supplier: Electron Microscopy Sciences

Fluoro Gel with antifading agent 1, 4-Diazobicyclo-(2,2,2-octane (DABCO™) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Alexa fluoro 488, Alexa fluoro 594, Cy dyes, tetramethyly rhodamine, and Redox. The fluorescence is retained during prolonged storage at 4°C in the dark.

Supplier: Electron Microscopy Sciences

The Aqua-Hold Pap Pen draws a liquid repellent barrier around a section of tissue. Used like a paint pen, you just draw a well on a slide. The barrier creates the proper surface tension to hold aqueous solutions such as costly antibody and other valuable specimens.

Supplier: Genetex

The PAP pen is a special marking pen that provides a thin film-like green-tinged hydrophobic barrier when a circle is drawn around a specimen on a slide

Supplier: Polysciences Inc

JB-4 Plus® is a unique polymer embedding system that provides a higher level of morphological detail than paraffin processed tissues

Supplier: AAT Bioquest

FluoroQuest™ TSA/PSA Antifade mounting medium is the only mounting medium that is optimized for tyramide (TSA) and styramide (PSA)-based fluorescence imaging applications.

Supplier: Diagnostic Biosystems

CC/mount is an aqueous mounting medium with a high refractive index. When applied to stained tissue sections, specimens can be permanently mounted without chromogens fading.

Supplier: Electron Microscopy Sciences

Provides excellent penetration for embedding biological tissues and rapid infiltration. Easy to prepare. The hardness is adjusted by changing the proportion of the flexibilizer (DER 736). The blocks have good trimming and sectioning qualities. Thin sections are tough under the electron beam.

Supplier: Electron Microscopy Sciences

MWM100 Black Wax is designed for use as a masking material in jet polishing applications. As it is chemically inert, it is resistant to etching solutions such as hydrofluoric acid, perchloric acid and acetic acid. While it is resistant to many acids, it can be easily removed with hydrocarbon or chlorinated solvents.

Supplier: Electron Microscopy Sciences

A broad line of electrically and thermally conductive materials, which provide solutions to a variety of electrical, electronic, and thermal design problems throughout the laboratories and industries.

Supplier: Electron Microscopy Sciences

Mollenhauer Epon-Araldite Formula. Sectioning with this mixture of resins has been proven to be easier than with each individual resin and the thermal stability of araldite and the image contrast of EM-bed-812 have made this a very successful blend.

Supplier: Electron Microscopy Sciences

MWS052 is a tan colored wax, which is translucent on thin films. Softness makes it most useful with abrasive slurry cutting of materials. Best suited to non-porous surfaces such as glass or polished metal with a reasonably large area. Easily soluble in a variety of solvents.

Supplier: AAT Bioquest

FluoroQuest™ Antifade mounting medium is a specialized and stable formula that effectively preserves fluorescence by preventing rapid photobleaching of fluorescent proteins and dyes.

Supplier: Electron Microscopy Sciences

Until now, LR White has been the most commonly used embedding media for materials due to the block hardness it offered, but there are difficulties associated with LR White

Supplier: AAT Bioquest

FluoroQuest™ with DAPI is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.

Supplier: G-Biosciences

Sputo-LR™ is a concentrated sterile solution of Cleland’s reagent (dithiothreitol, DTT) in phosphate buffer at pH 7.0 and is for processing samples from sputum for smears and culture.

Supplier: Electron Microscopy Sciences

The same as our Lowicryl complete kits but this new formulation allows you one stop embedding without all of the cumbersome preparation and mixing.  This pre-mixed, ready to use resin, saves you time and minimizes chemical contact.  MonoStep Lowicryl is ideal for use in immunohistochemistry and immunolabeling.  Store at room temperature.

Supplier: WORLD PRECISION INSTRUMENTS LLC

Vetbond is an n-butyl Cyanoacrylate adhesive that quickly and conveniently closes minor wounds. It cures in seconds after contact with tissue and body fluids and binds wound edges together so natural healing can occur.

Supplier: AAT Bioquest

FluoroQuest™ with DAPI is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.

Supplier: AAT Bioquest

When proteins are conjugated to fluorescent organic dyes, fluorescence emission of the dye molecules is usually decreased, sometimes up to 50 to 70%.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The properties of this bio-compatible surgical adhesive make it exceptionally useful for neuroscience applications, peripheral nerve studies and similar biomedical applications.

Supplier: Mopec

Mopec’s Formaway green liquid formalin neutralizer quickly and effectively neutralizes spent formalin for sewer disposal. Simply add 32 ounces of Formaway green to each gallon of 10% neutral buffered formalin waste and allow to stand for at least 4 hours before disposing.

Supplier: Biotium

PMA Enhancer for Gram Negative Bacteria was designed to improve PMA- and PMAxx™-mediated discrimination between live and dead gram-negative bacteria.

Supplier: Electron Microscopy Sciences

The same advantages offered by EPON 812, are offered by EMbed 812: rapid penetration, greater contrast, easy sectioning, stability under the electron beam, satisfactory staining of most thick sections for light microscopy and thin sections for electron microscopy.

Supplier: Electron Microscopy Sciences

Application: Mounting of Immunohisto slides

Supplier: Electron Microscopy Sciences

Hollande's fixative is a modification of Bouin's solution. Used as a fixative for biopsy specimens of the gastrointestinal tract.

Supplier: Electron Microscopy Sciences

Hatmann’s (Davidson’s) fixative is rapid fixative. Results with good nuclear detail and minimal formalin pigment.

Supplier: Electron Microscopy Sciences

CytoSeal comes in a Controlled Drop Dispenser, with varying viscosities

Supplier: Electron Microscopy Sciences

The mixture of Butyl and Methyl Methacrylate offers many advantages over the standard GMA and HPMA embedding mediums

Supplier: Electron Microscopy Sciences

UV Mount Medium is a mounting medium that is designed to match the refractive index of JB-4 embedded sections