You searched for: Microscopy and staining reagents

Supplier: Electron Microscopy Sciences

Formaldehyde/zinc fixative is ready-to-use solution. Can be used with automated tissue processors.

Supplier: Electron Microscopy Sciences

Bouin's fixative is used on biopsy specimens of the gastrointestinal tract.

Supplier: Electron Microscopy Sciences

A combination of Sodium Cacodylate, Formalin, and Glutaraldehyde. Ready to use.

Supplier: Electron Microscopy Sciences

A wide tipped pen designed for use with frozen sections

Supplier: Electron Microscopy Sciences

A special mounting media for immunofluorescent staining procedures. It is a water soluble, non-fluorescing medium which is well suited for use when the staining procedure has an aqueous final step. It contains 10% polyvinyl alcohol in phosphate buffered glycerol with 0.1% sodium azide as a preservative.

Supplier: Electron Microscopy Sciences

A variety of Loctite adhesives are available that will bond a range of materials.

Supplier: Electron Microscopy Sciences

Mirsky’s Fixative™ is a superior fixing agent for use in immunohistological and immunological protocols

Supplier: Electron Microscopy Sciences

Premixed, prebuffered fixatives, that are pH adjusted for immediate laboratory use.

Supplier: Electron Microscopy Sciences

DEPEX is a colorless, neutral, xylene miscible mountant which is suitable for preparations where Canada Balsam is usually used.

Supplier: Electron Microscopy Sciences

This EMS one part Epoxy Gold Paste is a gold-filled conductive bonding, exhibiting high electrical conductivity and bond strength.

Supplier: Electron Microscopy Sciences

This pen is designed for making instant conductive silver traces.

Supplier: Electron Microscopy Sciences

This mounting medium is made with limonene, a natural product from orange peels. It preserves  tissues and cell smears that can be dehydrated with organic solvents in immunohistochemistry, e.g. DAB and DAB with nickel or cobalt.

Supplier: Cargille Laboratories

Essential for Sharp Resolution at High Magnification

Supplier: Electron Microscopy Sciences

Epo-Tek® H20E is a two component, 100% solid silver-filled epoxy system.

Supplier: Avantik

Optik Type 2 Alcoholic Clarifier is designed to be used with Type 2 Hematoxylin to produce cell transparency and remove any non-specific staining. Slightly milder clarifier than the Optik Aqueous Clarifier.

Supplier: Electron Microscopy Sciences

Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range of embedding conditions. These resins provide low viscosity at low temperatures.

Supplier: Electron Microscopy Sciences

When preparation requirements include less expensive, uniform size and shape, and short processing times, hot mounting (hot compression mounting) is ideal. Hot mounting takes place under pressure in a mounting press, where the specimen is placed in a cylinder together with the appropriate mounting resin.

Supplier: Electron Microscopy Sciences

Fluoro-Gel Mounting Medium with a strong anti-fading agent 1,4-phenylenediamine is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula preserves rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 388, Alexa Fluoro 594 tetramethyly rhodamine, and Redox. The fluorescence is retained during prolong storage at 4°C in the dark. This medium contains Phynylenediamine and is not suitable for immunofluorescence of Cy dyes, Phycoerythrin (R-PR) phycocyanin  (PC), and allophycocyanin (APC).

Supplier: Mopec

Mopec’s Formaway formalin neutralizing powder safely and easily neutralizes spent formalin waste to a non-hazardous and non-toxic solution in only 20 minutes. Contents are emptied directly into 1 gallon of spent 10% Formalin or 4% Glutaldehyde, reducing risk exposure to lab personnel. This unique formula also eliminates drain-clogging polymers.

Supplier: Vector Laboratories

The ImmEdge™ Hydrophobic Barrier Pen can be used to draw a barrier around a section on a slide that keeps aqueous solutions in place and minimizes the amount of reagent needed for each section.

Supplier: IBIDI USA MS

A mounting medium that is optimized for fluorescence microscopy and ibidi µ-Slides and µ-Dishes.

Supplier: IBIDI USA MS

A biocompatible silicone oil used to prevent medium evaporation in cell culture applications.

Supplier: ADVANSTA INC MS

Superior chemiluminescent substrate for ELISA applications.

Supplier: HANNAS PHARMACEUTICALS MS

This epoxy adhesive is a one-part, thermosetting liquid adhesive that provides exceptionally high strength at temperatures from –70 to 300 °F (–57 to 149 °C). This white to cream colored adhesive can be applied by knife coating, trowel, roller coating, pump and high pressure injection methods.

Supplier: Vector Laboratories

VectaMount™ Permanent Mounting Media protects sections under coverslips and preserves IHC staining patterns.

Supplier: Leica Biosystems MS

BOND dewax solution is a deparaffinization solution specifically designed for use on the automated BOND system.

Supplier: Accurate Chemical & Scientific

Immunostaining, liquid blocker pen.

Supplier: IMEB INC MS

A low-hazard replacement for Bouin’s Fixative.

Supplier: Novus Biologicals

Aqueous mounting medium for fluorescent staining

Supplier: Aqua Solutions

Carnoy's solution used as fixative.