You searched for: Fittings and Connectors

Supplier: Antyila Scientific

Liquid-tight tubing connections for 1/4-28 and 5/16-24 ports.

Supplier: Chemglass

80 mm adapter to sanitary fitting adapter.

Supplier: Upchurch Scientific

FlushNut™ Fittings are designed for tight-space applications where nut heads often interfere with each other

Supplier: Antyila Scientific

Barbed fittings are an economical means of connecting soft-wall tubing to manifold ports.

Supplier: Welch Vacuum

Used to mate two different sizes of ISO flanges

Supplier: Kimble Chase

Adapters are designed for use in chromatography applications with a luer to hose barb connection.

Supplier: DWK Life Sciences (KIMBLE)

This convenient stainless-steel universal joint with ⁵/₁₆" O.D. shaft and polyacetal adapter connects stirrer shafts to stirrer motors.

Supplier: Cadence Science

Made of inert PEEK and designed for quick, leak-proof connections.

Supplier: Colder Products

These quick disconnect couplings are injection molded from acetal thermoplastic, making them highly durable and resistant to most chemical solutions

Supplier: Restek

Septum nuts are for use with Agilent 5890/6850/6890/7890 split/splitless injectors.

Supplier: Colder Products

Engineered to provide safe, secure container change outs with a quick connect and disconnect technology and integrated dip tube

Supplier: Chemglass

Adapters, air inlets/outlets, overlay aeration, for bioreactors.

Supplier: BIOPTECHS INC.

The white, top portion of a FCS2® without perfusion ports, which enables the FCS2® to be assembled without the microaqueduct slide

Supplier: Antyila Scientific

For liquid-tight connection of semi-rigid tubing (¹/₁₆" to ³/₁₆" O.D.) to ¹/₄" NPT ports.

Supplier: Restek

Ferrules are designed for use with micropacked columns in Agilent 5890/6850/6890/7890 GCs

Supplier: Colder Products

Couplings allow rapid disconnect and reconnect with one hand and without the need for tools

Supplier: BIOPTECHS INC.

These 9 mm thick internally and externally threaded polymer rings are to be placed between an objective and nosepiece to inhibit thermal conductivity.

Supplier: Restek

These adapters make a minimum-volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco® zero-dead-volume fitting.

Supplier: Colder Products

Tentube™ coupling provides one easy-to-use quick disconnect for up to ten separate fluid lines.

Supplier: Trajan Scientific and Medical

SGE understands today’s chromatographers need to move from tubing based flow systems to planar microchannel systems to deliver flexible chromatography solutions

Supplier: Holland Applied Technologies

Solid end cap is made of stainless steel 304 and clamps on to the end of a process line. The end cap clamps on to the end of a ferruled tube to close the line, providing a non-permanent seal that provides take down access.

Supplier: BIOPTECHS INC.

The white, top portion of a FCS2® that is equipped with 0.5 mm I.D

Supplier: BD

Multipurpose catheter adapter provide a threaded, female BD Luer-Lok™ connection to tubing and can be used for general catheterization techniques

Supplier: Restek

Restek is pleased to offer the reusable EXP® fitting system from Optimize Technologies for the ultimate in easy, reliable LC connections.

Supplier: Restek

PTV inlet adapter kits are suitable for 0.25 mm and 0.32 mm ID columns.

Supplier: Colder Products

HFC35 series polysulfone couplings are able to withstand demanding applications and feature physical strength, chemical resistance and autoclavability.

Supplier: Restek

Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.

Supplier: Vernier Software & Technology

This adapter facilitates the connection between an Oxygen Gas Sensor and a Spirometer. Measures the oxygen gas concentration and flow rate of exhaled air.

Supplier: Restek

Use micropacked inlet conversion kits to convert capillary GC split/splitless inlets for use with ¹/₁₆" OD micropacked columns.

Supplier: Colder Products

Steam-Thru II Connections offer the flexibility of "steam on" and "steam off" functionality. The innovative design allows the valve to be returned to the steam position enabling a second SIP cycle following media transfer.