Supplier: VWR International

Sealing mats made of EVA (Ethylene Vinyl Acetate), suitable for square well plates.

Supplier: VWR International

This 96-well septa sealing mat is a cost-effective alternative and is compatible with the ABI 3100.

Supplier: VWR International

Provide a safe, secure seal to minimize sample loss with VWR® Deep Well Storage Plates.

Supplier: VWR International

These easily-pierceable 94.1 µm polyethylene films with acrylic adhesive allow direct sample recovery with single or multichannel pipettors and robotic probes.

Supplier: VWR International

Identical to polyester films above, but including a colour dot and white writing area on each end tab for plate identification.

Supplier: VWR International

50 µm polyolefin films with 50 µm inert encapsulated silicone adhesive. Especially suited for qPCR, storage and protein crystallisation applications. The encapsulated silicone adhesive is non tacky until pressed against the sealing surface, at which time adhesive is released only in sealing areas to form the strongest available heat resistant seal around each well on the plate.

Supplier: VWR International

Aluminium foils, 75.7 µm thick, for use with 96- or 384-well plates. Fit inside the rim of raised rim plates. These foils have one partial-width end tab. Available non sterile only.

Supplier: Corning

Easy application and removal for short and long-term storage. Provides tight seal to minimise evaporation and condensation.

Supplier: AZENTA US, INC

This seal is designed as a low-cost sealing option, and useful for temporary storage and as a cover for applications such as centrifugation.

Supplier: SPEX

Cole-Parmer®, Microplate seal, Mat (96 wells), Single sheet/mat/strip, Sealing mat for square 96-well reinforced microplate (2205-50), Silicone

Supplier: Corning

Axygen AxyMat sealing mats can be used in a wide range of temperatures for PCR and storage applications.

Supplier: MP Biomedicals

Acetate plate sealers are not gas permeable and not autoclavable.

Supplier: Eppendorf

Secure your samples with confidence using Eppendorf® Sealing mats, the ideal solution for incubation and short-term storage needs. These reusable mats can be autoclaved and come in a 'PCR Clean' purity grade (free of RNase, DNase, Human DNA and PCR inhibitors).

Supplier: Excel Scientific

The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately.

Supplier: Corning

Sealing films are ideal for 96-well, 384-well, deep well, and other assay and PCR plates.

Supplier: Excel Scientific

The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately.

Supplier: MP Biomedicals

This microplate sealing tape is suitable for all microplates for both short- and long-term storage, providing a tight seal to minimize evaporation and condensation.

Supplier: AZENTA US, INC

These strips of 8 flat crystal clear optical caps are designed for low volume applications such as low volume qPCR.

Supplier: Thermo Scientific

These sealing mats are placed directly on the microplate by hand or with an applicator.

Supplier: Chemglass

SealMate™ system provides a convenient method for sealing standard-format microplates with adhesive films

Supplier: Antyila Scientific

Supplier: MP Biomedicals

Acetate plate sealer is easy to apply and remove from microplates. In addition, this microplate sealing tape is suitable for all microplates for both short and long term storage, providing a tight seal to minimize evaporation and condensation.

Supplier: AZENTA US, INC

The aluminum heat sealing foil is resealable, peelable, pierceable, suitable for compound storage and PCR. Suitable for short term storage.

Supplier: Thermo Fisher Scientific

These caps are for use with 0.5 ml U96, 0.45 ml V96, and 1.0 ml and 2.0 ml deep well polypropylene plates.

Supplier: AZENTA US, INC

These clear polypropylene sealing caps, available as strips of 8 caps (domed or flat optical) and strips of 12 caps (flat optical) are molded from virgin polypropylene and are compatible with our tube strips and 96 well PCR plates.

Supplier: Thermo Fisher Scientific

Vinyl sealing tape with pressure sensitive acrylate adhesives provide a secure seal on all polystyrene, polypropylene, and polycarbonate microplates (including 384- and 1536-well plates).

Supplier: Zymo Research

Covers are available in packs of 2, 4, or 8.

Supplier: Agilent Technologies

Certified for use with the PlateLoc Thermal Microplate Sealer.

Supplier: AZENTA US, INC

The cell culture adhesive seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates.

Supplier: AZENTA US, INC

The clear heat seal is an optically clear laminate film forms a peelable seal to polypropylene, polyethylene, polystyrene, polycarbonate and cyclic olefin copolymer (COC) SBS format plates.