You searched for: Stains

Supplier: Bulldog Bio

Midori Green Advance — Safe DNA Stain, a safe alternative to ethidium bromide

Supplier: Electron Microscopy Sciences

Kit consists of 500 mL LR Gold Resin, 100g Polyvinylpyrolidone; 50g Benzoyl Peroxide, and 50g Benzil.

Supplier: Electron Microscopy Sciences

Slide coating cup with stand and cleaning brush. Glass cup is Pyrex and is designed to conserve expensive autoradiographic emulsion when coating glass slides. Needs only 1/4 the volume of solution previously required. Single piece holder permits immersion in a water bath and provides a stable darkroom stand to prevent spills, and faster temperature adjustment of the emulsion.

Supplier: G-Biosciences

QuenchShield™ Mountant is glycerol based aqueous mountant, which prevents quenching of fluorescence of fluorescent labeled cells and tissues samples during fluorescence microscopy experiments. In addition, it helps preserve the fluorescence of stored slides.

Supplier: Electron Microscopy Sciences

Adhesive 154 is an easy-to-apply resistance coating designed to provide high lubricity, conductivity, and excellent release properties to many non-conductive substrates, including most plastics.

Supplier: Electron Microscopy Sciences

Cargille PCB-Free Immersion oils were introduced in 1972. Today, no other immersion oil meets FDA criteria.  Now four standard types are available with the introduction of Type NVH, a very high viscosity oil. All Cargille Immersion Oils meet DIN 58 884 (Deutsche Institut Fur Normung e.V.).

Supplier: Electron Microscopy Sciences

Three different mixtures: one for relatively soft blocks, another for harder blocks for collagenous tissue, and a tougher one if required., Lockwood, W.R. Anatomical Record, 150, 129 (1964). Kit consists of 2x225 ml DER 332, 225 ml DER 732, 450 ml DDSA; Specially Distilled, 50 ml DMP-30.

Supplier: Electron Microscopy Sciences

A dry temporary adhesive film, 0.003" thick, which can be easily cut to size with either a razor or scissor. This mount permits pre-placement of the adhesive film exactly where the user wants it. It melts at 195-210°F. After application it can be dissolved rapidly in trichloroethylene or toluene. This material is particularly useful in applications where a pre-formed adhesive film is needed to assure uniform bonding and flatness or in bonding stacks of substrates such as LCD glass slides for slicing. Sheet size 8"x10".

Supplier: Electron Microscopy Sciences

Michel’s Fixative, pH 7.0 – 7.4

Supplier: Electron Microscopy Sciences

Cuts to four micron thickness without crumbling and cracking .

Supplier: Electron Microscopy Sciences

For the mounting of hydrated sections.

Supplier: Electron Microscopy Sciences

Scala C

Supplier: Electron Microscopy Sciences

Fixative Reagent Grade (Karnovsky’s). This fixative contains 3% glutaraldehyde and 2% formaldehyde in 0.1M phosphate buffer, pH 7.4. Karnovsky’s with formalin 2% and Biological glutaraldehyde 3% in 0.1m Phosphate Buffer. Karnovsky’s with paraformaldehyde solution and EM grade glutaraldehyde.

Supplier: Electron Microscopy Sciences

XTEM TEM Sample Preparation Kit is specifically for the preparation of cross-sectional TEM (XTEM) specimens

Supplier: Electron Microscopy Sciences

TFM™ is an embedding matrix for frozen sections with an ultra pure formulation of water-soluble glycols and resins that provides a solid bond between the tissue and the object holder.

Supplier: Mopec

Amplify is a fixative spray usually applied after the application of Harmony dyes, although it can also be applied to tissue prior to marking with dyes.

Supplier: Electron Microscopy Sciences

Excellent adhesive for all paper pasting and mountings of drawings and photographs. It is also used to adhere specimens to SEM Stubs. Any excess cured cement can be easily removed. 4 oz. bottle comes with a brush in the cap.

Supplier: Leica Biosystems

Sub-X® Clearing Agent is an economical xylene substitute that is an essentially odorless and non-greasy aliphatic hydrocarbon.

Supplier: Electron Microscopy Sciences

Adhesive 478SS is a conductive, silver-based polymer which is used for thick film coatings where liquid silver is not an option.

Supplier: Electron Microscopy Sciences

Also known as American Araldite.

Supplier: Electron Microscopy Sciences

Luft's Formula.

Supplier: Electron Microscopy Sciences

DGD is a removable embedding medium (for thin and thick sections) that provides embedment free sections

Supplier: AAT Bioquest

When exposed to excitation light, fluorescence intensity of dyes decreases due to their photooxidation or other photoreactions.

Supplier: AAT Bioquest

When exposed to excitation light, fluorescence intensity of dyes decreases due to their photooxidation or other photoreactions.

Supplier: Electron Microscopy Sciences

Mounting media for cover glass.  It comes in a convenient dispensing tube or bottle.   Solvent based which is soluble in xylene and has a 10 minute dry time.  Its viscosity is 33 cps at 25°.

Supplier: Electron Microscopy Sciences

EMS Shield Mount  is an aqueous non-permanent, low viscosity mounting medium for immunofluorescence. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa fluoro 488, Alexa fluoro 594, Green fluorescent protein (GFP), tetramethyly rhodamine and Redox. The fluorescence is retained during storage at 4°C in the dark.

Supplier: Electron Microscopy Sciences

Quetol 651 - NSA is a water miscible epoxy resin used for both light and electron microscopy. Its low viscosity permits easy infiltration and embedding, and yields light-colored blocks.

Supplier: Electron Microscopy Sciences

A water soluble embedding media which is based on Glycol Methacrylate (GMA) plastic embedding. It is intended for use in preparing samples for high resolution microscopes (HRLM). The catalyzed monomer acts as a dehydration and infiltration agent. Therefore, complete dehydration through 100% ethanol is not necessary although recommended for large or dense tissues. Conventional paraffin sections have a greater degree of shrinkage and produce inadequate morphology when compared to JB-4.JB-4 Kit Consists of 800 mL Solution A, 30 mL Solution B, and 12 g Catalyst.

Supplier: Electron Microscopy Sciences

Hatmann’s (Davidson’s) fixative is rapid fixative. Results with good nuclear detail and minimal formalin pigment.

Supplier: Avantik

Can be used on all types of specimens