You searched for: Stains

Supplier: Electron Microscopy Sciences

A unique embedding primer.

Supplier: Biotium

PMA Enhancer for Gram Negative Bacteria was designed to improve PMA- and PMAxx™-mediated discrimination between live and dead gram-negative bacteria.

Supplier: Aladdin Scientific

Immersion oil for microscopy

Supplier: Electron Microscopy Sciences

for bonding strain gages and special-purpose sensors, useful in temperatures from -452°F to +350° F (-269°C to +175°C), recommended for transducer applications up to +250°F (+120°C), Shelf Life, Post Life and Pot life:about nine months, C

Supplier: Electron Microscopy Sciences

The Crystal Clear™ series of polyurethane resins are designed for applications that require absolute clarity

Supplier: Streck Laboratories

Easy-to-use liquid preservatives stabilize cell morphology and preserve cellular antigen expression

Supplier: Electron Microscopy Sciences

Reduces infiltration time by one-third. Cuts to 2 micron thickness with excellent ribbon continuity.

Supplier: Electron Microscopy Sciences

LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It has a very low viscosity (8cps), is non-toxic resin, and is suitable for both Light and Electron Microscopy.

Supplier: Electron Microscopy Sciences

The one glue we all know and have used.

Supplier: Chemplex

Converts powdered samples into a slurry to eliminate segregation by size or density during comminution process.

Supplier: KPL

Fluorescent Mounting Media is glycerol-based and optically clear liquid for immunofluorescence microscopy

Supplier: Electron Microscopy Sciences

This mixture is less viscous than the final embedding mixture of EMbed-812.

Supplier: Electron Microscopy Sciences

The same as our Lowicryl complete kits but this new formulation allows you one stop embedding without all of the cumbersome preparation and mixing.  This pre-mixed, ready to use resin, saves you time and minimizes chemical contact.  MonoStep Lowicryl is ideal for use in immunohistochemistry and immunolabeling.  Store at room temperature.

Supplier: Electron Microscopy Sciences

Premixed, prebuffered fixatives, that are pH adjusted for immediate laboratory use. They are freshly prepared upon receipt of order to ensure maximum shelf life. The fixatives are filled in 20 mL glass vials (10 mL/vial). This allows for the immediate fixation of your specimens without costly and time consuming transfer associated with ampoule contained fixatives.

Supplier: Electron Microscopy Sciences

Kit consists of 500 mL LR Gold Resin, 100g Polyvinylpyrolidone; 50g Benzoyl Peroxide, and 50g Benzil.

Supplier: Electron Microscopy Sciences

Slide coating cup with stand and cleaning brush. Glass cup is Pyrex and is designed to conserve expensive autoradiographic emulsion when coating glass slides. Needs only 1/4 the volume of solution previously required. Single piece holder permits immersion in a water bath and provides a stable darkroom stand to prevent spills, and faster temperature adjustment of the emulsion.

Supplier: G-Biosciences

QuenchShield™ Mountant is glycerol based aqueous mountant, which prevents quenching of fluorescence of fluorescent labeled cells and tissues samples during fluorescence microscopy experiments. In addition, it helps preserve the fluorescence of stored slides.

Supplier: Electron Microscopy Sciences

Adhesive 154 is an easy-to-apply resistance coating designed to provide high lubricity, conductivity, and excellent release properties to many non-conductive substrates, including most plastics.

Supplier: Bulldog Bio

Midori Green Advance — Safe DNA Stain, a safe alternative to ethidium bromide

Supplier: Electron Microscopy Sciences

Cargille PCB-Free Immersion oils were introduced in 1972. Today, no other immersion oil meets FDA criteria.  Now four standard types are available with the introduction of Type NVH, a very high viscosity oil. All Cargille Immersion Oils meet DIN 58 884 (Deutsche Institut Fur Normung e.V.).

Supplier: Electron Microscopy Sciences

Three different mixtures: one for relatively soft blocks, another for harder blocks for collagenous tissue, and a tougher one if required., Lockwood, W.R. Anatomical Record, 150, 129 (1964). Kit consists of 2x225 ml DER 332, 225 ml DER 732, 450 ml DDSA; Specially Distilled, 50 ml DMP-30.

Supplier: Electron Microscopy Sciences

A dry temporary adhesive film, 0.003" thick, which can be easily cut to size with either a razor or scissor. This mount permits pre-placement of the adhesive film exactly where the user wants it. It melts at 195-210°F. After application it can be dissolved rapidly in trichloroethylene or toluene. This material is particularly useful in applications where a pre-formed adhesive film is needed to assure uniform bonding and flatness or in bonding stacks of substrates such as LCD glass slides for slicing. Sheet size 8"x10".

Supplier: Electron Microscopy Sciences

Hydromount™ is the traditional choice whenever a nonfluorescing aqueous medium is needed. Hydromount™ is water-based and is suitable for mounting specimens that have been processed in water. Hydromount™ is effective for frozen sections, amyloid, and immunofluorescent staining procedures. Should it become necessary, Hydromount™ may be removed by soaking the slides in warm saline.

Supplier: Electron Microscopy Sciences

Michel’s Fixative, pH 7.0 – 7.4

Supplier: Electron Microscopy Sciences

Cuts to four micron thickness without crumbling and cracking .

Supplier: Electron Microscopy Sciences

For the mounting of hydrated sections.

Supplier: Electron Microscopy Sciences

Scala C

Supplier: Electron Microscopy Sciences

Fixative Reagent Grade (Karnovsky’s). This fixative contains 3% glutaraldehyde and 2% formaldehyde in 0.1M phosphate buffer, pH 7.4. Karnovsky’s with formalin 2% and Biological glutaraldehyde 3% in 0.1m Phosphate Buffer. Karnovsky’s with paraformaldehyde solution and EM grade glutaraldehyde.

Supplier: Electron Microscopy Sciences

XTEM TEM Sample Preparation Kit is specifically for the preparation of cross-sectional TEM (XTEM) specimens

Supplier: Electron Microscopy Sciences

TFM™ is an embedding matrix for frozen sections with an ultra pure formulation of water-soluble glycols and resins that provides a solid bond between the tissue and the object holder.