You searched for: Distillation Components

Supplier: DWK Life Sciences (KIMBLE)

Jacketed distillation columns are manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements.

Supplier: Ace Glass

Reflux distillation splitter adapter for all sizes of reactors

Supplier: Ace Glass

This is a borosilicate glass solvent distillation head designed to maintain solvents or vapors in an no-air atmosphere

Supplier: Ace Glass

This distillation receiver is calibrated to contain

Supplier: Ace Glass

The apparatus is graduated to 15mL in 1/10mL subdivisions, with the lower 0.5mL contained in a precision tip for better accuracy with extremely small samples

Supplier: Ace Glass

Used in phosphorus determination

Supplier: Ace Glass

Vacuum comes jacketed and silvered with viewing strip or unsilvered

Supplier: Ace Glass

This head has a finger type condenser and a Newman type stopcock for reflux control

Supplier: Ace Glass

This apparatus is similar to the congealing temperature apparatus described in U.S

Supplier: Ace Glass

The Kjeldahl trap adapter is used to prevent carryover of reactions that have a tendency to foam.

Supplier: Corning

This PYREX® tube is approximately 200mm long and may be used for simple semi-micro vacuum or atmospheric distillation, either as a reaction flask or a receiving tube

Supplier: DWK Life Sciences (KIMBLE)

Adapter has an “O” ring that holds a thermometer or gas inlet tube securely.

Supplier: Ace Glass

This short path, minimum hold-up still is supplied with a one-piece, 89074-366 "cow" receiver with four 3 mL arms

Supplier: DWK Life Sciences (KIMBLE)

Provide dual entry into a variety of flasks.

Supplier: DWK Life Sciences (KIMBLE)

Inlet and outlet tubes are curved in opposite directions within the bulb

Supplier: Corning

These PYREX® 60° angle distilling connecting adapters have a 24/40 Standard Taper outer joint at the upper end and inner 24/40 Standard Taper joints and on the sidearm and lower joints

Supplier: SP Industries

This Kjeldahl distilling apparatus is made of borosilicate glass.

Supplier: SP Industries

Designed for oils lighter than water, this distilling apparatus is made of borosilicate glass and consists of a Clevenger-type trap with a Standard Taper 24/40 outer joint on top and same size inner joint the sidearm

Supplier: DWK Life Sciences (KIMBLE)

These distillation receivers are ideally suited for the determination of water content in organic solvents.

Supplier: DWK Life Sciences (KIMBLE)

Rotation of cold finger condenser allows collection of distillate or return to flask.

Supplier: DWK Life Sciences (KIMBLE)

Distillation receivers 14/20 cow type with three receivers.

Supplier: DWK Life Sciences (KIMBLE)

Design utilizes a thermometer bulb as column packing

Supplier: Ace Glass

This adapter features a 75° side arm.

Supplier: Ace Glass

Distilling trap adapters are placed above flask to prevent carryover of reactions that have a tendency to foam.

Supplier: Ace Glass

This adapter is designed for connecting a distilling column with a vertical condenser.

Supplier: Ace Glass

This is an excellent all-purpose receiver for general distillation work

Supplier: Ace Glass

This apparatus is useful for separating higher boiling liquids that require a short flask-to-column distance to prevent excessive condensation

Supplier: Ace Glass

Microscale Hickman still head is used to carry out micro-sample fractional distillations

Supplier: Ace Glass

This Hempel distillation column has a [ST] 24/40 reinforced outer joint at top, a [ST] 24/40 inner joint at bottom, and a perforated glass disc for packing support

Supplier: Ace Glass

This Hennion Design distillation head is used for variable reflux ratio, and can be operated under vacuum