You searched for: Tube Racks

Supplier: Simport Scientific

Multipurpose storage box and workstation in a 96-well format.

Supplier: Ward's Science

This corrosion-proof polypropylene basket is ideal for rinsing glassware — simply slide the lid on, rinse, and invert for easy draining. The basket holds test tubes for storage, sterilization, or incubation. Autoclavable to 121°C. Size: 17 x 17 x 16cm.

Supplier: Alkali Scientific

Organize your microcentrifuge tubes effectively with microcentrifuge tube rack, featuring 5×16 holes/rack in assorted colors.

Supplier: Globe Scientific

Workstation racks hold four different sizes of microtubes, screw cap microtubes, PCR tubes, and microcentrifuge tubes

Supplier: Globe Scientific

Reinforced nylon rack is autoclavable and chemical resistant.

Supplier: Thermo Fisher Scientific

This reversible rack is ideal for any researcher utilizing strip tubes for PCR.

Supplier: United Product & Instrument

The Basis For Sample Management In Any Type Of Laboratory.

Supplier: Eppendorf

Supplier: Eppendorf

These transfer racks are designed as a work rack for sample preparation and used to maintain accurate and uniform temperatures.

Supplier: Thermo Fisher Scientific

The unique end plate on this rack allows you to create agar slant tubes at either 5° or 20° depending on which side you use. To create the slant tubes, simply autoclave the media tubes while they are in the rack, and after autoclaving, set the rack on the bench at the desired angle. The media will harden with a consistent slant. The rack is also useful for incubating liquid cultures on a slant. In addition, it is keyed with numbers and letters for identification, is stackable, and does not float in water baths. It will hold forty 16 mm tubes. Size: 11 1/4" x 4 1/2".

Supplier: Heathrow Scientific

These Low Temperature PCR Racks feature a sliding lid that roates 180° to become a convenient stand that the rack sits on. These PCR racks also feature ergonomic textured finger grips that provide a secure hold, reducing the chance of dropping the rack, and makes handling and transportation easy.

Supplier: Electron Microscopy Sciences

Polypropylene rack has 96 wells to accommodate 0.5 mL micro centrifuge tubes on one side, or 96 wells for 1.5 to 2.0 mL micro centrifuge tubes on the other side. Arranged in standard 8 x 12 array. Handy lid snaps into place in the tabs on each end of rack. Grid lines are molded on the side of the rack that accommodates the smaller tubes making it easier to see the wells. Raised rings are molded on the opposite side of the rack making it easier to replace the 1.5 to 2.0 mL tubes from those wells. Rack measures 9.75 x 4.75 x 1.875".

Supplier: GeneMate

IsoFreeze MCT racks are manufactured with a gel-filled center section that uses temperature-dependent color-change material, green to yellow or purple to pink.

Supplier: Heathrow Scientific

Microtube rack is made of reinforced nylon, and offers superior chemical and heat resistance over most other plastic based racks.

Supplier: GeneMate

This compact rack is small enough to pick up with one hand, but big enough to hold enough tubes for most experiments. One side of the rack has 32 wells for 0.5 mL tubes plus an additional 8 wells across for 1.5/2.0 mL tubes. The reverse/flip side has the opposite configuration of 32 wells for 1.5/2.0 mL tubes and 8 wells for 0.5 mL tubes.

Supplier: GeneMate

The rack is formatted in the standard 8 x 12 microtiter format and indexed A through H vertically and 1 through 12 horizontally for convenient and error-free tube identification. The included natural lids have a non-slip edge to allow non-slip stacking of multiple racks.

Supplier: Alkali Scientific

Maximize lab space with 4-way test tube rack, accommodating 4×50 ml, 12×15 ml, or 32×microtubes (0.5, 1.5, or 2 ml) in a rainbow pack.

Supplier: Alkali Scientific

Enhance qPCR workflow with qPCR/plastic tube rack with lid, compatible with 96×0.2 ml tubes, strips or plates, available in a pack of 5.

Supplier: United Scientific Supplies

Durable PP centrifuge tube box.

Supplier: CRYSTAL TECHNOLOGY & INDUSTRIES

Tube Holder and Carousels for Crystal Tube Rotators, Crystal

Supplier: Electron Microscopy Sciences

Rust-proof anodized aluminum rack – designed to be used in water/ice baths.

Supplier: Heathrow Scientific

These racks helps to keep large numbers of microtubes organized on benchtop.

Supplier: United Scientific Supplies

Easy to grab polypropylene floating rack.

Supplier: Shiv Dial Sud & Sons

Made of wood with turned wood posts. Has holes for tubes up to 19 mm in diameter.

Supplier: Thermo Fisher Scientific

This sturdy rack ensures that your sample will remain level and easy to use while working at the lab bench

Supplier: Janitorial Supplies

Tools are inserted from the bottom and held in place by strong rubber grips.

Supplier: SARSTEDT INC

High-quality, safe, and robust racks and boxes are essential for specimen processing and storage. SARSTEDT offers the right product for every laboratory and analytical requirement.

Supplier: SARSTEDT INC

High-quality, safe, and robust racks and boxes are essential for specimen processing and storage. SARSTEDT offers the right product for every laboratory and analytical requirement.

Supplier: Therapak, LLC

This two-tube holder protects fragile specimens or evacuated blood tubes on outbound and inbound shipments

Supplier: Dunrite Instruments

Designed to fit small test tubes, these clamps are made from heavy gauge nickel-plated steel wire. Package of six.