You searched for: Electrodes

Supplier: TESTEQUITY LLC TE

Pogo pin spring-loaded tips. Plugs fit most Fluke, Tektronix, Hewlett-Packard and Wavetek meters.

Supplier: WTW

This selection of conductivity cells includes the TetraCon® series of cells, which feature the highest degree of precision and linearity by optimized cell geometry, an extremely large measuring range with just one cell, long-term cell constant stability with high-quality abrasion-resistant graphite electrodes, and a built-in temperature sensor

Supplier: Vernier Software & Technology

Includes interface and suite of sensors for a lab group of 2 to 4 students.

Supplier: CAL TEST ELECTRONICS SE

A high bandwidth, high voltage 100x passive voltage probe with a 100 MΩ input impedance.

Supplier: ONSET COMPUTER CORPORATION SE

Versatile, high-performance air velocity and air temperature sensors, with sensor element built remotely from sensor electronics; F350 series.

Supplier: Hach

Radiometer Analytical reference electrodes are available with a variety of reference systems and liquid junctions.

Supplier: YSI

These sensor measures ORP (oxidation reduction potential) or redox, quickly and easily.

Supplier: Vernier Software & Technology

Measure the ability of a solution to act as an oxidizing agent or reducing agent with this oxidation-reduction potential sensor.

Supplier: Vernier Software & Technology

Use the Go Direct Glass-body pH to measure pH in aqueous, heterogeneous, and organic solutions.

Supplier: CAL TEST ELECTRONICS SE

A high bandwidth, high voltage 100x passive voltage probe with a 100 MΩ input impedance.

Supplier: Vernier Software & Technology

Easily quantify voltage, current, power, and energy output of small wind turbines and solar panels.

Supplier: Ace Glass

Type J temperature probes provide economical measurement from -20° C to 550° C

Supplier: ONSET COMPUTER CORPORATION SE

Research grade level measurements and data monitoring for water pressure, temperature, and water level measurements.

Supplier: Vernier Software & Technology

This completely wireless system simplifies experiment setup and allows basic experiments to be conducted with or without the track.

Supplier: Hach

These glass electrodes are compatible with Hach sensION+ benchtop pH meters (or any meter with a BNC connection). The PHG301 pH electrode should be used with Ag/AgCl or calomel reference electrodes.

Supplier: Hach

IntelliCAL™ ISENO3181 is a digital combination nitrate ion selective electrode (ISE) with a non refillable, double junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.

Supplier: WORLD PRECISION INSTRUMENTS LLC

ISO NOPF electrodes are  flexible sensor, nearly unbreakable and available in 100, 200 and 500 µm diameters. Laboratory have created these completely flexible and virtually unbreakable NO sensors.

Supplier: Mettler Toledo

Flow cells are recommended for measuring conductivity in pure water or in samples with low conductivity to rule out the falsification of results by carbon dioxide.

Supplier: Siemens Healthineers

Inner Element Assembly from Siemens Healthineers are for use with RAPIDLab® 1200 Blood Gas Analyzers.

Supplier: Hach

sensION+ 5057 is a combination platinum ORP electrode with a glass body and refillable liquid-electrolyte reference. It is dedicated for use with Hach sensION+ labpratory pH (mV) meters.

Supplier: Hach

This digital, combination gas-sensing ammonia ion selective electrode (ISE) with replaceable membrane module, refillable outer body, double junction reference and built-in temperature sensor is intended for laboratory use.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The hydrogen peroxide sensors developed by WPI are designed to compliment existing high sensitivity fluorescent approaches with direct quantitative measurement in biological samples in the low nM range.

Supplier: YSI

Connect any ProDIGITAL integrated probe/cable assembly the ProSolo to form a complete sampling system. Probe assemblies are user-replaceable with cable lengths ranging from 1 to 100 m.

Supplier: Hach

sensION+ 9650 is a half-cell sodium ion selective electrode (ISE) with glass body and glass membrane selective to sodium ions in solution. It is recommended for use with the sensION+ 5044 reference electrode.

Supplier: WORLD PRECISION INSTRUMENTS LLC

Direct quantitative measurements of hydrogen peroxide in biological samples.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The ISO NOP007 has a tip diameter of just 7 µm and a length of 2 mm. The response is linear over a wide dynamic concentration range of NO.

Supplier: WTW

Adapter cable required.

Supplier: YSI

Connect any ProDIGITAL integrated probe/cable assembly the ProSolo to form a complete sampling system. Probe assemblies are user-replaceable with cable lengths ranging from 1 to 100 meters.

Supplier: Hach

sensION+ 5055 is a combination platinum ORP electrode with a polycarbonate body and non refillable gel-electrolyte reference. It is dedicated for use with Hach sensION+ portable pH (mV) meters.

Supplier: WTW

These galvanic sensors are ready-to-use and are equipped with protective hoods for rough conditions.